Kodak 2J0686 manual Operating the Processor, View Mode, Set Mode, Calibrate Mode, Min Max Mode

System Operating Procedures

Operating the Processor

Operator Control Panel

The operator control panel (OCP) for the processor allows you to view and control:

•chemical and dryer temperatures

•development time

•chemical replenishment rate

•current day and time

•automatic startup and shutdown times

•equipment status checks

•error messages

LCD display	current mode
	current
Set key	feature
	information
SET	- - - SET - - -
	MON OFF 15:00
LED indicator
lights	Up and
	Down
	Arrows

blue function keys Reset keys

The keypad on the OCP is covered with a plastic overlay and can be easily wiped clean using a damp cloth. The display is a two-line liquid crystal display (LCD). The top line indicates whether the processor is in the View, Set, Calibrate or Min Max mode. The bottom line indicates the current feature information, menu selections, etc. and is called the working line.

View Mode

The View mode is the normal screen mode. In this mode current processing conditions, device settings and messages from the processor can be viewed.

Set Mode

The Set mode is used to change the operation settings of the processor.

Calibrate Mode

The Calibrate mode is used to calibrate devices and ensure that the processor is accurately tracking and displaying equipment conditions.

Min Max Mode

The Min Max mode is used to view the minimum and maximum readings for the device that is current.

3-26 October 2002