![](/images/new-backgrounds/1197974/19797487x1.webp)
System Operating Procedures
CAUTION: If the paper does not load properly or a paper jam occurs, press Cancel. Remove any paper from the shoe area and repeat steps 6 through 12. Make sure the lead edge is cut square.
paper alignment | lead edge of |
guide | the paper |
idler roller
gear on the cassette
gear on the | cassette |
printer | clamp |
13.Close the paper supply door. The paper automatically feeds into position for printing and the fogged section at the lead edge of the roll is trimmed off. The message “Status: ON LINE – Ready” appears when initialization is complete.
October 2002 |