Additional Calibration Information
Editing DP2 Information (WINDOWS NT Systems)
When you click the DP2 tab of the Edit Configuration screen, the following tabbed screen appears. The values displayed in the example are the default settings.
Attribute | Description |
|
|
|
|
Activate DP2 | Indicates if the calibration procedure should generate a LUT file to be |
| used with the DP2 system |
|
|
DP2 Location | Directory to contain generated LUT files for use with DP2 |
|
|
DP2 Filename | Name of the file containing the DP2 LUT files |
|
|
1.If DP2 is not already activated, click the Activate DP2 checkbox (click again to deactivate) so that the screen looks like the example above.
2.To change the DP2 Location, type a new directory name or click Browse and select another directory.
3.If needed, change the DP2 Filename.
4.If you have completed all editing of configuration information (including information on the other tabbed screens), click OK to save the changes and close the Edit Configuration screen.
NOTE: Click Cancel to cancel all changes made to the Edit Configuration screen and close the Edit Configuration screen.
5.To make other changes to the Edit Configuration, click on another tab and make changes as needed.
October 2002 |
