![](/images/new-backgrounds/1197974/19797417x1.webp)
Viewing/Setting the Temperatures | |
Viewing the Temperature Settings | |
Setting the Temperature | |
Calibrating the Temperatures | |
Resetting the Min Max Temperatures | |
Viewing/Setting Replenishment Settings | |
Viewing the Replenishment Rate | |
Setting the Chemical Replenishment Rate | |
Setting the Wash Replenishment Rate | |
Calibrating the Replenishment Flow Rate | |
Measuring the Flow Rate | |
Entering the Flow Rate | |
Managing the Development Time | |
Viewing the Development Time | |
Setting the Development Time | |
Calibrating the Development Time | |
Displaying the Min Max Development Time | |
Managing the Material Sensors | |
Viewing the Material | |
Viewing the Processor Setup | |
Selecting the Processor Setup | |
Controlling the Processor Drive | |
Turning the Drive On | |
Returning the Drive to Normal Operation | |
Computer Reset | |
Resetting the Processor | |
Loading the Defaults and Changing the Configuration | |
Changing the Wash/Stabilizer Setup | |
Changing the Metric/Fahrenheit Mode | |
Setting the Development Time Tolerance | |
Setting the Chemical Temperature Tolerance | |
Clearing Error Conditions | |
4 Maintaining the Equipment | |
Maintaining the Printer | |
Daily Maintenance | |
Removing the Chad | |
Calibrating the Printer | |
Periodic Maintenance | |
Replacing the Air Filter | |
Maintaining the Processor | |
Daily Maintenance | |
Chemistry Levels | |
Replenishment and Effluent Chemical Levels | |
Cleaning the Crossover Assemblies | |
Operational Checks | |
Testing |
October 2002 | ix |