Poulan 966558001, 115358026 Maintain Control, Reduce the Chance of Kickback, Avoid Pinch-Kickback

Page 4

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

S Pull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.

Avoid Pinch-Kickback:

S Be extremely aware of situations or ob- structions that can cause material to pinch the top of or otherwise stop the chain.

SDo not cut more than one log at a time.

SDo not twist the saw as the bar is with- drawn from an undercut when bucking.

Avoid Pull-In:

SAlways begin cutting with the engine at full

speed and the saw housing against wood. S Use wedges made of plastic or wood.

Never use metal to hold the cut open.

Make sure the chain brake nuts are se- curely tightened after tensioning the chain.

SBegin and continue cutting at full speed. If the chain is moving at a slower speed,

there is greater chance of kickback occur- ring.

SCut one log at a time.

SUse extreme caution when re-entering a previous cut.

SDo not attempt cuts starting with the tip of the bar (plunge cuts).

SWatch for shifting logs or other forces that could close a cut and pinch or fall into

chain.

SUse the Reduced--Kickback Guide Bar and Low--Kickback Chain specified for your saw.

MAINTAIN CONTROL

Stand to the left of the saw

Thumb on underside of handlebar

Never reverse hand positions

Kickback Path

Avoid Obstructions

Clear The Working Area

REDUCE THE CHANCE OF KICKBACK

S Recognize that kickback can happen. With a basic understanding of kickback, you can reduce the element of surprise which contributes to accidents.

SNever let the moving chain contact any ob- ject at the tip of the guide bar.

SKeep the working area free from obstruc- tions such as other trees, branches, rocks, fences, stumps, etc. Eliminate or avoid any obstruction that your saw chain could hit while you are cutting. When cutting a branch, do not let the guide bar contact branch or other objects around it.

SKeep your saw chain sharp and properly tensioned. A loose or dull chain can in- crease the chance of kickback occurring. Follow manufacturer’s chain sharpening and maintenance instructions. Check ten- sion at regular intervals with the engine stopped, never with the engine running.

Elbow locked

Thumb on underside of handlebar

SKeep a good, firm grip on the saw with both hands when the engine is running and don’t let go. A firm grip will help you reduce kick- back and maintain control of the saw. Keep the fingers of your left hand encircling and your left thumb under the front handlebar. Keep your right hand completely around the rear handle whether your are right handed or left handed. Keep your left arm straight with

the elbow locked.

SPosition your left hand on the front handlebar so it is in a straight line with your right hand on the rear handle when making bucking cuts. Never reverse right and left hand posi-

tions for any type of cutting.

SStand with your weight evenly balanced on

both feet.

SStand slightly to the left side of the saw to keep your body from being in a direct line

with the cutting chain.

SDo not overreach. You could be drawn or thrown off balance and lose control of the saw.

SDo not cut above shoulder height. It is diffi- cult to maintain control of saw above shoul- der height.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual de Instrucciones Manuel d’Instructions Starting Reminder Plan AheadOperate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackMaintain Control Reduce the Chance of KickbackAvoid Pinch-Kickback Avoid Pull-InKickback Safety Features Chain Brake and CKA AngleChain saws as set by Ansi B175.1 If your hand slips off the front handlebarAssembly Computed kickback angle CKA TableAttaching the Bumper Spike If not already attached Attaching the BAR & Chain If notAdjusting the tension Inside view Chain Brake Adjustment located on Chain BrakeChain Tension Including units with chain already installed Checking the tensionON/STOP Switch Throttle Trigger OperationKnow Your SAW ON/STOPThrottle LOCK---OUT CHOKE/FAST Idle LeverChain Brake Chain TensionStarting a Warm Engine Important Points to RememberDifficult Starting or starting a flooded engine Cutting Methods Braking function controlInertia activating function control Important PointsFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Types of Cutting Used for BuckingBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingService Cleaning the Spark Arresting ScreenPruning AIR FilterCarburetor Adjustments BAR MaintenanceIdle Speed-T Back View of MufflerChain Sharpening Tools requiredTo Sharpen Chain RightStorage Load Adjustment Engine Troubleshooting Table Cause RemedyEmpty fuel tank and refill with Limited Warranty Canada, contactPoulan Ligations The U.S. EnvironmentalNANCE, Replacement and Repair of Emission Related Parts Any

115358026, 966558001 specifications

The Poulan 966558001 and 115358026 are two prominent models in the realm of outdoor power equipment, particularly favored for their efficiency and reliability in lawn care and maintenance tasks. Poulan, a brand known for delivering robust and user-friendly tools, has integrated several features and technologies into these models that enhance their performance and usability.

One of the standout features of the Poulan 966558001 is its powerful engine. Designed to deliver consistent performance, the engine provides ample power for cutting through thick grass and tackling difficult terrains. Coupled with a dependable fuel system, this model ensures a prolonged operation without the need for frequent refueling, making it ideal for large lawns and extensive areas.

In contrast, the Poulan 115358026 focuses on lightweight mobility without sacrificing power. Its design is tailored for easy handling, allowing users to navigate tight spaces and maneuver around obstacles effortlessly. This model is particularly suited for homeowners who require a reliable tool for smaller yards or intricate landscaping tasks.

Both models incorporate advanced technologies that enhance their cutting capabilities. An efficient blade system is a hallmark of the Poulan brand, and these models feature sharp, durable blades that provide clean cuts to promote healthier grass growth. Additionally, the adjustable cutting height found in both models allows users to customize their mowing experience according to their lawn's needs, providing versatility for varying grass lengths.

User comfort is another priority reflected in the ergonomic designs of both the 966558001 and 115358026. Equipped with comfortable grips, these mowers reduce strain during extended use, making lawn care less of a chore. Furthermore, the vibration-reducing technology helps to minimize fatigue, ensuring that users can operate the machines for longer periods without discomfort.

Finally, maintenance is made straightforward with both Poulan models. Easy access to key components simplifies cleaning and upkeep, allowing users to maintain their equipment in optimal condition for extended lifespans.

In summary, the Poulan 966558001 and 115358026 exemplify the brand’s commitment to quality and innovation. With their powerful engines, intelligent design, and user-friendly features, these models stand out as reliable choices for effective lawn care, catering to the needs of both casual homeowners and dedicated gardening enthusiasts.
Top Page Image Contents