Poulan 952802151, 545186809 Load Adjustment Engine, Empty fuel tank and refill with

Page 19

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

 

 

 

 

 

 

Engine will not

1. Ignition switch off.

1.

Move ignition switch to ON.

 

start or will run

2. Engine flooded.

2.

See “Difficult Starting” in

 

only a few

 

 

 

Operation Section.

 

seconds after

3. Fuel tank empty.

3.

Fill tank with correct fuel mixture.

 

starting.

4. Spark plug not firing.

4.

Install new spark plug.

 

 

5. Fuel not reaching

5.

Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

 

repair or replace.

 

 

 

 

 

 

 

Engine will

1.

Idle speed requires

1. See “Carburetor Adjustment” in the

 

not idle

 

adjustment.

 

Service and Adjustments Section.

 

properly.

2.

Carburetor requires

2. Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

 

Engine will not

1.

Air filter dirty.

1. Clean or replace air filter.

 

accelerate,

2.

Spark plug fouled.

2. Clean or replace plug and regap.

 

lacks power,

3.

Chain brake engaged.

3. Disengage chain brake.

 

or dies under

4.

Carburetor requires

4. Contact an authorized service dealer.

 

a load.

 

adjustment.

 

 

 

 

 

 

 

 

 

 

 

Engine

1.

Too much oil mixed with

1.

Empty fuel tank and refill with

 

smokes

 

gasoline.

 

correct fuel mixture.

 

excessively.

 

 

 

 

 

 

Chain moves

1. Idle speed requires

1. See “Carburetor Adjustment” in the

 

at idle speed.

 

adjustment.

 

Service and Adjustments Section.

 

 

2. Clutch requires repair.

2.

Contact an authorized service dealer.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Starting ReminderTions found in this manual Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionAvoid Pull-In Reduce the Chance of KickbackMaintain Control Avoid Pinch-KickbackChain Brake and CKA Angle Kickback Safety FeaturesChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyChain Tension Adjusting the tensionChecking the tension Operation ON/STOP Switch Throttle TriggerKnow Your Chain SAW Chain Brake Throttle LOCK-OUTCHOKE/FAST Idle Lever Primer BulbRight Foot Through Rear Handle Important Points to RememberStarting a Warm Engine Difficult Starting or starting a flooded engineTree Felling Techniques Braking function control Caution The chain brake must beInertia activating function control Operating TipsImportant Points Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsCheck for Damaged or Worn Parts ServicePruning General RecommendationsCheck Guide BAR Inspect and Clean Unit and DecalsClean AIR Filter Check Chain SharpnessReplace Fuel Filter Cleaning the Spark ARREST- ING ScreenChain Adjustment Replace Spark PlugRight Carburetor AdjustmentIdle Speed-T Cooling SystemEngine StorageSeasonal Storage Fuel SystemEmpty fuel tank and refill with Load Adjustment EngineLigations The U.S. Environmental Poulan

952802151, 545186809 specifications

The Poulan 545186809, 952802151 is a robust and efficient chainsaw designed for both professional and residential use. This model seamlessly blends innovation with power, making it a reliable tool for a variety of cutting tasks, from light pruning to heavy-duty tree felling.

One of the standout features of the Poulan 545186809 is its powerful engine. Equipped with a 45cc engine, it delivers sufficient power to handle tough cutting jobs while maintaining optimal fuel efficiency. The engine operates smoothly, reducing vibrations and minimizing user fatigue during prolonged use. This makes it an ideal choice for those who require a dependable chainsaw for extended periods.

The design of the Poulan 545186809 also incorporates advanced technologies aimed at enhancing user experience. An automatic oiler system ensures that the chain remains lubricated at all times, reducing friction and wear. This feature not only prolongs the life of the chain but also promotes smoother cuts. The tool-less chain tensioning mechanism allows users to adjust the chain tension quickly and conveniently without the need for additional tools— an essential feature for on-the-go adjustments.

Safety is a primary consideration with the Poulan 545186809. The chainsaw is equipped with an inertia-activated chain brake, which stops the chain immediately in the event of kickback, safeguarding the operator from injuries. Additionally, the model features a sturdy front guard that offers extra protection while maintaining visibility of the cutting area.

Another notable characteristic is its lightweight and ergonomic design. Weighing in at just over 10 pounds, it is manageable for most users, and the cushioned grip provides comfort, reducing strain on the hands. The compact build also allows for easy maneuverability, making it perfect for tight spaces.

In terms of maintenance, the Poulan 545186809 is user-friendly. The air filter is easily accessible for cleaning or replacement, thus ensuring the engine operates at peak performance.

Overall, the Poulan 545186809, 952802151 is a powerful, versatile, and safe chainsaw that can tackle various cutting tasks with ease. Its combination of innovative features, safety mechanisms, and user comfort makes it an excellent choice for anyone looking to invest in a high-quality chainsaw. Whether for professional landscaping or casual home use, this model stands out as a reliable tool in the world of outdoor equipment.
Top Page Image Contents