Poulan 545186809, 952802151 Operation, Know Your Chain SAW, ON/STOP Switch Throttle Trigger

Page 8

3.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

4.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw 1/4 turn clockwise. Repeat until sag does not exist.

Adjusting Screw -- 1/4 Turn

5.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

6.Use the screwdriver end of the bar tool to move chain around guide bar.

7.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw 1/4 turn counterclockwise. Retighten bar nuts.

8.If chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

NOTE: The chain is tensioned correctly when the weight of the chain does not cause it to sag below the guide bar (with the chain saw sitting in an upright position), but the chain still moves freely around the guide bar.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury to the op- erator and/or damage the chain making it un- usable. If the chain jumps off the guide bar, in- spect each drive link for damage. Damaged chain must be repaired or replaced.

OPERATION

KNOW YOUR CHAIN SAW

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Chain

 

Front Hand Guard

Front Handle

 

Adjustment Tool

 

 

 

 

Starter Rope

 

(Bar Tool)

 

 

 

 

 

 

 

 

 

 

 

 

 

ON/STOP

Choke/

 

 

 

 

Switch

 

Chain

Muffler

 

Fast Idle

 

 

Lever

Bar

Bar Oil Fill Cap

 

 

 

 

Sprocket

 

 

 

 

 

Hole

Starter Housing

Fuel Mix Fill Cap

Primer Bulb

 

 

Cylinder Cover

 

 

 

 

Throttle

 

Chain

 

Chain

Lockout

 

Brake

 

Direction

Rear

 

 

 

 

of Travel

 

Adjusting Screw

 

 

Handle

 

 

 

 

 

 

 

 

 

 

Chain

Guide Bar

Throttle

 

 

 

Clutch Cover

Catcher

 

 

Trigger

Bar Nuts

 

 

 

 

ON/STOP SWITCH

THROTTLE TRIGGER

 

The ON/STOP SWITCH is used to stop the

The THROTTLE TRIGGER controls engine

engine.

 

speed.

 

 

 

8

Image 8
Contents Manual de Instrucciones Manuel d’Instructions Tions found in this manual Starting ReminderPlan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackReduce the Chance of Kickback Maintain ControlAvoid Pinch-Kickback Avoid Pull-InChain saws as set by Ansi B175.1 Kickback Safety FeaturesChain Brake and CKA Angle Assembly Attaching the BAR & Chain If notChecking the tension Adjusting the tensionChain Tension Know Your Chain SAW ON/STOP Switch Throttle TriggerOperation Throttle LOCK-OUT CHOKE/FAST Idle LeverPrimer Bulb Chain BrakeImportant Points to Remember Starting a Warm EngineDifficult Starting or starting a flooded engine Right Foot Through Rear HandleBraking function control Caution The chain brake must be Inertia activating function controlOperating Tips Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeCutting a Fallen Tree Important PointsBucking Using a LOG or Support Stand Bucking Without a SupportLimbing and Pruning Important Points LimbingService PruningGeneral Recommendations Check for Damaged or Worn PartsInspect and Clean Unit and Decals Clean AIR FilterCheck Chain Sharpness Check Guide BARCleaning the Spark ARREST- ING Screen Chain AdjustmentReplace Spark Plug Replace Fuel FilterCarburetor Adjustment Idle Speed-TCooling System RightStorage Seasonal StorageFuel System EngineLoad Adjustment Engine Empty fuel tank and refill withPoulan Ligations The U.S. Environmental

952802151, 545186809 specifications

The Poulan 545186809, 952802151 is a robust and efficient chainsaw designed for both professional and residential use. This model seamlessly blends innovation with power, making it a reliable tool for a variety of cutting tasks, from light pruning to heavy-duty tree felling.

One of the standout features of the Poulan 545186809 is its powerful engine. Equipped with a 45cc engine, it delivers sufficient power to handle tough cutting jobs while maintaining optimal fuel efficiency. The engine operates smoothly, reducing vibrations and minimizing user fatigue during prolonged use. This makes it an ideal choice for those who require a dependable chainsaw for extended periods.

The design of the Poulan 545186809 also incorporates advanced technologies aimed at enhancing user experience. An automatic oiler system ensures that the chain remains lubricated at all times, reducing friction and wear. This feature not only prolongs the life of the chain but also promotes smoother cuts. The tool-less chain tensioning mechanism allows users to adjust the chain tension quickly and conveniently without the need for additional tools— an essential feature for on-the-go adjustments.

Safety is a primary consideration with the Poulan 545186809. The chainsaw is equipped with an inertia-activated chain brake, which stops the chain immediately in the event of kickback, safeguarding the operator from injuries. Additionally, the model features a sturdy front guard that offers extra protection while maintaining visibility of the cutting area.

Another notable characteristic is its lightweight and ergonomic design. Weighing in at just over 10 pounds, it is manageable for most users, and the cushioned grip provides comfort, reducing strain on the hands. The compact build also allows for easy maneuverability, making it perfect for tight spaces.

In terms of maintenance, the Poulan 545186809 is user-friendly. The air filter is easily accessible for cleaning or replacement, thus ensuring the engine operates at peak performance.

Overall, the Poulan 545186809, 952802151 is a powerful, versatile, and safe chainsaw that can tackle various cutting tasks with ease. Its combination of innovative features, safety mechanisms, and user comfort makes it an excellent choice for anyone looking to invest in a high-quality chainsaw. Whether for professional landscaping or casual home use, this model stands out as a reliable tool in the world of outdoor equipment.