Poulan 952802151 Check Chain Sharpness, Check Guide BAR, Check Fuel Mixture Level, Lubrication

Page 15

CHECK CHAIN SHARPNESS

A sharp chain makes wood chips. A dull chain makes a sawdust powder and cuts slowly. See CHAIN SHARPENING.

CHECK GUIDE BAR

Conditions which require guide bar mainte- nance:

SSaw cuts to one side or at an angle. S Saw has to be forced through the cut. S Inadequate supply of oil to bar/chain.

Check the condition of guide bar each time chain is sharpened. A worn guide bar will damage the chain and make cutting difficult. After each use, ensure ON/STOP switch is in the STOP position, then clean all sawdust from the guide bar and sprocket hole.

To maintain guide bar:

S Move ON/STOP switch to STOP.

S Loosen and remove bar nuts and clutch cover. Remove bar and chain from saw.

S Clean the oil holes and bar groove after each 5 hours of operation.

Remove Sawdust From

Guide Bar Groove

Oil Holes

S Burring of guide bar rails is a normal process of rail wear. Remove these burrs with a flat file.

SWhen rail top is uneven, use a flat file to re- store square edges and sides.

File Rail Edges

and Sides

Square

Worn Groove

Correct Groove

Replace guide bar when the groove is worn, the guide bar is bent or cracked, or when ex- cess heating or burring of the rails occurs. If re- placement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw.

CHECK FUEL MIXTURE LEVEL

S See FUELING ENGINE under the OP- ERATION section.

LUBRICATION

Bar Oil

Fill Cap

SSee GUIDE BAR AND CHAIN OIL under the OPERATION section.

INSPECT AND CLEAN UNIT AND DECALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CHECK CHAIN BRAKE

See CHAIN BRAKE in the OPERATION section.

CLEAN AIR FILTER

CAUTION: Do not clean filter in gasoline or other flammable solvent to avoid creating a fire hazard or producing harmful evaporative emissions.

Cleaning the air filter:

A dirty air filter decreases the life and perfor- mance of the engine and increases fuel con- sumption and harmful emissions. Always clean your air filter after 10 tanks of fuel or 5 hours of operation, whichever comes first. Clean more frequently in dusty conditions. A used air filter can never be completely cleaned. It is advisable to replace your air fil- ter with a new one after every 50 hours of op- eration, or annually, whichever comes first.

1.Loosen 3 screws on cylinder cover.

2.Remove cylinder cover.

3.Remove air filter cover and air filter.

4.Clean the air filter using hot soapy water. Rinse with clean cool water. Air dry com- pletely before reinstalling.

5.Reinstall air filter and air filter cover.

6.Reinstall cylinder cover and 3 screws. Tighten securely.

Cylinder

Air FilterCover

Cover

Air Filter

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

As the unit is used, carbon deposits build up on the muffler and spark arresting screen, and must be removed to avoid creating a fire hazard or affecting engine performance.

Replace the spark arresting screen if breaks occur.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual de Instrucciones Manuel d’Instructions Starting Reminder Plan AheadTions found in this manual Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionAvoid Pull-In Reduce the Chance of KickbackMaintain Control Avoid Pinch-KickbackKickback Safety Features Chain Brake and CKA AngleChain saws as set by Ansi B175.1 Attaching the BAR & Chain If not AssemblyAdjusting the tension Chain TensionChecking the tension ON/STOP Switch Throttle Trigger OperationKnow Your Chain SAW Chain Brake Throttle LOCK-OUTCHOKE/FAST Idle Lever Primer BulbRight Foot Through Rear Handle Important Points to RememberStarting a Warm Engine Difficult Starting or starting a flooded engineTree Felling Techniques Braking function control Caution The chain brake must beInertia activating function control Operating TipsImportant Points Felling Large TreesNotch CUT and Felling the Tree Cutting a Fallen TreeLimbing Bucking Using a LOG or Support StandBucking Without a Support Limbing and Pruning Important PointsCheck for Damaged or Worn Parts ServicePruning General RecommendationsCheck Guide BAR Inspect and Clean Unit and DecalsClean AIR Filter Check Chain SharpnessReplace Fuel Filter Cleaning the Spark ARREST- ING ScreenChain Adjustment Replace Spark PlugRight Carburetor AdjustmentIdle Speed-T Cooling SystemEngine StorageSeasonal Storage Fuel SystemEmpty fuel tank and refill with Load Adjustment EngineLigations The U.S. Environmental Poulan

952802151, 545186809 specifications

The Poulan 545186809, 952802151 is a robust and efficient chainsaw designed for both professional and residential use. This model seamlessly blends innovation with power, making it a reliable tool for a variety of cutting tasks, from light pruning to heavy-duty tree felling.

One of the standout features of the Poulan 545186809 is its powerful engine. Equipped with a 45cc engine, it delivers sufficient power to handle tough cutting jobs while maintaining optimal fuel efficiency. The engine operates smoothly, reducing vibrations and minimizing user fatigue during prolonged use. This makes it an ideal choice for those who require a dependable chainsaw for extended periods.

The design of the Poulan 545186809 also incorporates advanced technologies aimed at enhancing user experience. An automatic oiler system ensures that the chain remains lubricated at all times, reducing friction and wear. This feature not only prolongs the life of the chain but also promotes smoother cuts. The tool-less chain tensioning mechanism allows users to adjust the chain tension quickly and conveniently without the need for additional tools— an essential feature for on-the-go adjustments.

Safety is a primary consideration with the Poulan 545186809. The chainsaw is equipped with an inertia-activated chain brake, which stops the chain immediately in the event of kickback, safeguarding the operator from injuries. Additionally, the model features a sturdy front guard that offers extra protection while maintaining visibility of the cutting area.

Another notable characteristic is its lightweight and ergonomic design. Weighing in at just over 10 pounds, it is manageable for most users, and the cushioned grip provides comfort, reducing strain on the hands. The compact build also allows for easy maneuverability, making it perfect for tight spaces.

In terms of maintenance, the Poulan 545186809 is user-friendly. The air filter is easily accessible for cleaning or replacement, thus ensuring the engine operates at peak performance.

Overall, the Poulan 545186809, 952802151 is a powerful, versatile, and safe chainsaw that can tackle various cutting tasks with ease. Its combination of innovative features, safety mechanisms, and user comfort makes it an excellent choice for anyone looking to invest in a high-quality chainsaw. Whether for professional landscaping or casual home use, this model stands out as a reliable tool in the world of outdoor equipment.
Top Page Image Contents