Poulan 545047541 instruction manual Checking the tension, Adjusting the tension

Page 7

5.Slide guide bar behind clutch drum until guide bar stops against clutch drum sprocket.

Mount the Bar

6.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

Place chain onto the sprocket

7.Place chain over and behind clutch, fitting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tighten only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

SLift up the tip of the bar and securely tight- en the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents English Français Manual de Instrucciones Manuel d’InstructionsPlan Ahead Identification of SymbolsSafety Rules Starting ReminderKickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionElbow locked Clear The Working Area Maintain ControlReduce the Chance of Kickback Do not cut more than one log at a timeGuide bar up and back toward the operator Kickback Safety FeaturesChain Brake and CKA Angle Chain saws as set by Ansi B175.1Inside view Chain Brake Adjustment located on Chain Brake AssemblyComputed kickback angle CKA Table Checking the tension Adjusting the tensionThrottle Lockout ON/STOP SwitchKnow Your SAW Throttle TriggerImportant Points to Remember StartingFueling Engine BAR and Chain LubricationStarting a Warm Engine Cutting MethodsImportant Points Carefully plan your sawing operation in ad- vance Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingLimbing ServicePruning Limbing and Pruning Important PointsInspect Muffler and Spark Arresting Screen Cleaning the air filterCleaning the Spark ARREST- ING Screen Carburetor AdjustmentNeed ASSISTANCE? Load Adjustment Engine Limited WarrantyEmpty fuel tank and refill with Electrolux Home PRODUCTS, INC Tions The U.S. Environmental ProtectionIntermediate 125 hours Extended 300 hours

545047541 specifications

The Poulan 545047541 is a powerful and versatile chainsaw designed for both professional landscapers and homeowners who require a reliable tool for various cutting tasks. Boasting a range of impressive features and innovative technologies, this chainsaw is engineered to deliver optimal performance while ensuring user comfort and safety.

One of the standout features of the Poulan 545047541 is its robust 50cc engine. This powerful engine provides ample horsepower, enabling it to tackle tough cutting jobs, such as felling trees, cutting firewood, and trimming larger branches with ease. The chainsaw is designed to handle demanding tasks while maintaining efficient fuel consumption, making it an economical choice for users who require a reliable chainsaw for regular usage.

The design of the Poulan 545047541 incorporates an automatic oiling system that ensures the chain and bar are consistently lubricated during operation. This feature not only enhances the lifespan of the chainsaw but also minimizes chain friction for smoother, more efficient cutting. The adjustable oil pump allows users to control the amount of oil dispensed based on the type of wood and the cutting conditions, further optimizing performance.

Safety is a top priority with the Poulan 545047541. It includes a chain brake mechanism that stops the chain almost instantly in case of kickback, providing necessary protection for the user. Additionally, features such as a rear handle with an anti-vibration system help to reduce fatigue during extended use, making it more comfortable to operate.

The chainsaw also features an ergonomically designed handle that ensures a secure grip, allowing users to maneuver the tool effectively. A visible fuel and oil indicator simplifies monitoring levels, preventing unexpected interruptions during work.

Moreover, the Poulan 545047541 is equipped with an easy-access air filter and spark plug, making maintenance straightforward. When it comes to storage, its lightweight build adds to its portability, allowing for easy transportation.

In summary, the Poulan 545047541 is an exceptional chainsaw that combines power, efficiency, and safety features to meet the demands of both professional and casual users. With its user-friendly design and advanced technologies, it stands as a reliable tool for anyone looking to manage cutting tasks seamlessly.
Top Page Image Contents