Poulan 545123582 Operate Your SAW Safely, Maintain Your SAW in Good Working Order, Kickback

Page 3

Hearing

Safety Hat

Protection

Eye

 

 

Protection

Snug

FittingHeavy Duty

ClothingGloves

Safety

Safety Chaps

Shoes

 

SKeep all parts of your body away from the chain when the engine is running.

SKeep children, bystanders, and animals a minimum of 30 feet (10 meters) away from the work area. Do not allow other people or animals to be near the chain saw when starting or operating the chain saw.

SDo not handle or operate a chain saw when you are fatigued, ill, or upset, or if you have taken alcohol, drugs, or medication. You must be in good physical condition and men- tally alert. Chain saw work is strenuous. If you have any condition that might be aggra- vated by strenuous work, check with your

doctor before operating a chain saw.

SCarefully plan your sawing operation in ad- vance. Do not start cutting until you have a clear work area, secure footing, and, if you are felling trees, a planned retreat path.

OPERATE YOUR SAW SAFELY

SDo not operate a chain saw with one hand. Serious injury to the operator, helpers, by- standers or any combination of these per-

sons may result from one-handed opera- tion. A chain saw is intended for two-handed use.

SOperate the chain saw only in a well-venti-

lated outdoor area.

SDo not operate saw from a ladder or in a tree. S Make sure the chain will not make contact with any object while starting the engine. Never try to start the saw when the guide

bar is in a cut.

S Do not put pressure on the saw at the end of the cut. Applying pressure can cause you to lose control when the cut is completed.

S Stop the engine before setting the saw down.

S Do not operate a chain saw that is dam- aged, improperly adjusted, or not com- pletely and securely assembled. Always replace bar, chain, hand guard, or chain brake immediately if it becomes damaged, broken or is otherwise removed.

S With the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a scabbard.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

SHave all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance sec-

tion of this manual. For example, if improp- er tools are used to remove or hold the fly- wheel when servicing the clutch, structural damage to the flywheel can occur and cause the flywheel to burst.

SMake certain the saw chain stops moving when the throttle trigger is released. For

correction, refer to CARBURETOR AD-

JUSTMENTS.

SNever modify your saw in any way.

SKeep the handles dry, clean, and free of oil or fuel mixture.

SKeep fuel and oil caps, screws, and fas- teners securely tightened.

S Use only Poulan accessories and re- placement parts as recommended.

HANDLE FUEL WITH CAUTION

SDo not smoke while handling fuel or while operating the saw.

SEliminate all sources of sparks or flame in the areas where fuel is mixed or poured. There should be no smoking, open flames, or work that could cause sparks. Allow en-

gine to cool before refueling.

SMix and pour fuel in an outdoor area on bare ground; store fuel in a cool, dry, well ventilated place; and use an approved, marked container for all fuel purposes. Wipe up all fuel spills before starting saw.

SMove at least 10 feet (3 meters) from fuel-

ing site before starting engine.

STurn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap

and refuel unit.

SStore the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

KICKBACK

WARNING: Avoid kickback which can result in serious injury. Kickback is the backward, upward or sudden forward motion of the guide bar occurring when the saw chain near the upper tip of the guide bar con- tacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. Contacting a foreign ob- ject in the wood can also result in loss of chain saw control.

SRotational Kickback can occur when the moving chain contacts an object at the up- per tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back to- ward the operator.

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 545123582 8/25/06 English Español FrançaisPlan Ahead Identification of SymbolsSafety Rules Starting ReminderKickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionDo not cut more than one log at a time Kickback Safety FeaturesReduce the Chance of Kickback Maintain ControlIf your hand slips off the front handlebar Chain Brake and CKA AngleInside view Chain Brake Adjustment located on Chain Brake AssemblyAdjusting the tension Chain TensionChecking the tension Throttle LOCK-OUT ON/STOP SwitchKnow Your Chain SAW Throttle TriggerImportant Points to Remember StartingFueling Engine BAR and Chain LubricationInertia activating function control Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function control Caution The chain brake must beFelling Large Trees Cutting MethodsImportant Points Tree Felling TechniquesBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingPruning ServiceLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the Spark ARREST- ING ScreenCarburetor Adjustment AIR FilterNeed ASSISTANCE? Limited Warranty Load Adjustment EngineEmpty fuel tank and refill with Ligations The U. S. Environmental Parts List Carburetor, Ignition SystemIntermediate 125 hours Extended 300 hours

545123582 specifications

The Poulan 545123582 chainsaw stands out as a reliable and powerful tool designed for both homeowners and professionals alike. Engineered with a strong emphasis on performance, this model is equipped with a host of features and technologies that enhance its usability and effectiveness in a variety of cutting applications.

One of the key characteristics of the Poulan 545123582 is its robust engine. This chainsaw features a high-performance gasoline engine that provides ample power for cutting through tough materials. The engine's efficient design ensures that it runs smoothly, allowing the user to tackle large logs and branches with ease. The combination of power and efficiency enables operators to complete their tasks quickly without excessive fatigue.

Another standout feature of this chainsaw is its lightweight and ergonomic design. Weighing less than many comparable models, the Poulan 545123582 allows users to maneuver easily without sacrificing cutting ability. The chainsaw is thoughtfully equipped with anti-vibration technology, which significantly reduces hand fatigue during extended use. This makes it an excellent choice for both amateur and professional users who require a tool that can be operated comfortably for long periods.

The Poulan 545123582 also integrates an adjustable chain tensioning system. This feature allows users to easily modify the chain’s tension without the need for additional tools. Proper chain tension is crucial for optimal cutting performance, and this tool ensures that maintaining that tension is hassle-free. Additionally, the chainsaw is designed with a quick-release air filter, making the maintenance process simpler and more efficient. This feature is vital for ensuring the longevity of the engine and overall performance, as it helps keep debris out and promotes better air flow.

Safety is paramount in the design of the Poulan 545123582. It comes equipped with an automatic oiler that delivers the right amount of lubrication to the chain, reducing wear and enhancing cutting efficiency. Also, the chainsaw features a chain brake that activates in case of kickback, providing an added layer of safety for users.

With a well-rounded combination of power, comfort, and user-friendly features, the Poulan 545123582 chainsaw is an excellent investment for anyone looking to accomplish their cutting tasks effectively and safely. Whether trimming trees or cutting firewood, this model is engineered to meet a wide range of needs while ensuring ease of use and operational longevity.
Top Page Image Contents