Poulan 545123582 instruction manual Chain Tension, Checking the tension, Adjusting the tension

Page 7

Mount the Bar

6.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Cutters

Depth Gauge

Drive Links

DISENGAGED

Front Hand Guard

ENGAGED

Chain Brake

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tight- en only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION

(Including units with chain already installed) NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Place chain onto the sprocket

7.Place chain over and behind clutch, fit- ting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

NOTE: CHAIN BRAKE MUST BE DISENGAGED BEFORE INSTALLA- TION ON THE SAW. TO DISENGAGE CHAIN BRAKE, PULL THE FRONT HAND GUARD BACK TOWARD THE REAR OF THE CHAIN BRAKE AS FAR AS POSSIBLE (SEE ILLUSTRA- TION).

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 545123582 8/25/06 English Español FrançaisPlan Ahead Identification of SymbolsSafety Rules Starting ReminderKickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionDo not cut more than one log at a time Kickback Safety FeaturesReduce the Chance of Kickback Maintain ControlIf your hand slips off the front handlebar Chain Brake and CKA AngleInside view Chain Brake Adjustment located on Chain Brake AssemblyChain Tension Adjusting the tensionChecking the tension Throttle LOCK-OUT ON/STOP SwitchKnow Your Chain SAW Throttle TriggerImportant Points to Remember StartingFueling Engine BAR and Chain LubricationInertia activating function control Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function control Caution The chain brake must beFelling Large Trees Cutting MethodsImportant Points Tree Felling TechniquesBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingPruning ServiceLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the Spark ARREST- ING ScreenCarburetor Adjustment AIR FilterNeed ASSISTANCE? Load Adjustment Engine Limited WarrantyEmpty fuel tank and refill with Ligations The U. S. Environmental Parts List Carburetor, Ignition SystemIntermediate 125 hours Extended 300 hours

545123582 specifications

The Poulan 545123582 chainsaw stands out as a reliable and powerful tool designed for both homeowners and professionals alike. Engineered with a strong emphasis on performance, this model is equipped with a host of features and technologies that enhance its usability and effectiveness in a variety of cutting applications.

One of the key characteristics of the Poulan 545123582 is its robust engine. This chainsaw features a high-performance gasoline engine that provides ample power for cutting through tough materials. The engine's efficient design ensures that it runs smoothly, allowing the user to tackle large logs and branches with ease. The combination of power and efficiency enables operators to complete their tasks quickly without excessive fatigue.

Another standout feature of this chainsaw is its lightweight and ergonomic design. Weighing less than many comparable models, the Poulan 545123582 allows users to maneuver easily without sacrificing cutting ability. The chainsaw is thoughtfully equipped with anti-vibration technology, which significantly reduces hand fatigue during extended use. This makes it an excellent choice for both amateur and professional users who require a tool that can be operated comfortably for long periods.

The Poulan 545123582 also integrates an adjustable chain tensioning system. This feature allows users to easily modify the chain’s tension without the need for additional tools. Proper chain tension is crucial for optimal cutting performance, and this tool ensures that maintaining that tension is hassle-free. Additionally, the chainsaw is designed with a quick-release air filter, making the maintenance process simpler and more efficient. This feature is vital for ensuring the longevity of the engine and overall performance, as it helps keep debris out and promotes better air flow.

Safety is paramount in the design of the Poulan 545123582. It comes equipped with an automatic oiler that delivers the right amount of lubrication to the chain, reducing wear and enhancing cutting efficiency. Also, the chainsaw features a chain brake that activates in case of kickback, providing an added layer of safety for users.

With a well-rounded combination of power, comfort, and user-friendly features, the Poulan 545123582 chainsaw is an excellent investment for anyone looking to accomplish their cutting tasks effectively and safely. Whether trimming trees or cutting firewood, this model is engineered to meet a wide range of needs while ensuring ease of use and operational longevity.
Top Page Image Contents