Poulan 177167 owner manual With Parking

Page 23

SERVICE AND ADJUSTMENTS

BELT

RH

TENSION ROD

SUSPENSION

(DISENGAGED

POSITION)

ARM

 

IDLER

PULLEY

SPRING

ARM

PRIMARY

IDLER ARM

R.H.

MANDREL

RH MANDREL COVER

ELECTRIC

CLUTCH

PULLEY

IDLER

PULLEY

L.H. MANDREL

SECONDARY

 

 

IDLER ARM

SPRING

 

 

 

 

SECONDARY

 

 

SPRING ARM

 

 

CENTER

 

 

MANDREL

IDLER

 

 

PULLEY

R.H.

 

 

 

 

MANDREL

 

 

COVER

 

FIG. 25

TO ADJUST BRAKE (See Fig. 26)

FIG. 24

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 25)

Park the tractor on level surface. Engage parking brake.

Remove mower drive belt (See “TO REPLACE MOWER DRIVE BELT” in this section of this manual).

Remove mower (See “TO REMOVE MOWER” in this section of this manual).

Remove screws from L.H. mandrel cover and remove cover.

Carefully roll belt off L.H. mandrel pulley.

Remove belt from center mandrel pulley, idler pulley, and R.H. mandrel pulley.

Remove any dirt or grass which may have accumulated around mandrels and entire upper deck surface.

Check secondary idler arm and idler pulley to see that they rotate freely.

Be sure spring is hooked in secondary idler arm and secondary spring arm.

Install new belt in lower groove of R.H. mandrel pulley, idler pulley, and center mandrel pulley as shown.

Carefully roll belt over L.H. mandrel pulley. Make sure belt is in all grooves properly.

Reinstall L.H. mandrel cover.

Reinstall mower to tractor (See “INSTALL MOWER AND DRIVE BELT” in the Assembly section of this manual).

Reassemble mower drive belt (See “TO REPLACE MOWER DRIVE BELT” in this section of this manual).

Your tractor is equipped with an adjustable brake system which is mounted on the side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-3/4", loosen jam nut and turn nut “A” until distance becomes 1-3/4". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

WITH PARKING

1-3/4"

NUT “A”

BRAKE

 

 

“ENGAGED”

JAM NUT

OPERATING

ARM

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUSTMENT IS NECESSARY CONTACT YOUR NEAR- EST AUTHORIZED SERVICE CENTER/DEPARTMENT

FIG. 26

23

Image 23
Contents DPR22H48STA Safe Operation Practices for Ride-On Mowers Safety RulesSafety Rules Table of Contents Unassembled Parts To Remove Tractor from Carton AssemblyTools Required for Assembly HOW to SET UP Your TractorInstall Seat See Fig To Attach Nose Roller See Fig Assemble Gauge Wheels to Mower Deck See FigInstall Mower and Drive Belt See Figs Check Brake System Check Tire PressureCheck Mower Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor To Transport See Figs To Adjust Gauge Wheels See FigTo Operate Mower See Fig To Operate on HillsTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Purge TransmissionBefore Each USE Lubrication ChartCustomer Responsibilities General RecommendationsTractor Engine Engine OIL Filter CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower To Level Mower HousingTo Replace Mower Drive Belt FRONT-TO-BACK Adjustment See FigsWith Parking Front Wheel Camber Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel Alignment Front Wheel TOE-IN AdjustmentTo Replace Fuse To Replace Headlight BulbInterlocks and Relays To Adjust Carburetor To Adjust Throttle Control Cable See FigTo Adjust Choke Control See Fig Engine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsOFF Service Notes Tractor Model Number DPR22H48STA SchematicElectrical KEY Part Description Chassis and Enclosures Bracket Fender Drive Transaxle See Breakdown Steering Assembly KEY Part NO. NO. Description Optional Equipment EngineSeat Assembly Wheels & Tires DecalsMower Lift Mower Deck Washer, Spacer Mower Vented Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service

177167 specifications

The Poulan 177167 is an advanced, high-performance chainsaw designed for both professional loggers and dedicated home users. Renowned for its robust construction and reliability, this model is engineered to handle a variety of cutting tasks, from felling trees to pruning branches and cutting firewood.

One of the standout features of the Poulan 177167 is its powerful 42cc engine, which provides ample strength for heavy-duty cutting applications. The engine is designed with a high horsepower-to-weight ratio, allowing users to operate the chainsaw efficiently without feeling overly fatigued. The easy start technology ensures that you can get going quickly without the frustration often associated with starting small engines.

This chainsaw incorporates a 16-inch bar, balanced for optimum maneuverability, making it suitable for various types of cutting jobs. The low-kickback chain design enhances user safety while providing smoother cutting action. The chain is also easy to replace and maintain, thanks to the tool-less chain tensioning feature. This allows for simple adjustments without the need for additional tools, making it convenient for users in the field.

Durability is a key characteristic of the Poulan 177167. The body of the chainsaw is constructed from high-quality materials designed to withstand the rigors of demanding tasks. Additionally, it features an automatic oiling system which continuously lubricates the chain, reducing wear and extending the life of the bar and chain assembly.

User comfort is prioritized in the design of the Poulan 177167, which includes a comfortable, ergonomically designed handle that reduces vibration and enhances grip. This minimizes hand fatigue during prolonged use, allowing users to stay focused on their cutting tasks.

Safety mechanisms such as the chain brake and throttle interlock are incorporated to protect users from accidents. The chain brake activates automatically during a kickback, stopping the chain instantly and providing peace of mind while operating the saw.

In summary, the Poulan 177167 is a feature-rich chainsaw designed for both versatility and durability. It combines a powerful engine with user-friendly technologies and safety features, making it an excellent choice for anyone in need of reliable cutting performance, whether for professional logging or home landscaping projects.