Poulan 952802075 instruction manual Troubleshooting Table Cause Remedy, Load Adjustment Engine

Page 18

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

 

 

 

 

Engine will not

1. Ignition switch off.

1. Move ignition switch to ON.

 

start or will run

2. Engine flooded.

2. See “Difficult Starting” in

 

only a few

 

 

 

Operation Section.

 

seconds after

3. Fuel tank empty.

3. Fill tank with correct fuel mixture.

 

starting.

4. Spark plug not firing.

4. Install new spark plug.

 

 

5. Fuel not reaching

5. Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

 

repair or replace.

 

 

 

 

 

 

Engine will

1.

Carburetor requires

1. See “Carburetor Adjustment” in the

 

not idle

 

adjustment.

 

Service and Adjustments Section.

 

properly.

2.

Crankshaft seals worn.

2. Contact an authorized service dealer.

 

 

 

 

 

 

 

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

 

accelerate,

2.

Spark plug fouled.

2.

Clean or replace plug and regap.

 

lacks power,

3.

Chain brake engaged.

3.

Disengage chain brake.

 

or dies under

4.

Carburetor requires

4.

Contact an authorized service dealer.

 

a load.

 

adjustment.

 

 

 

 

 

 

 

Engine

1. Too much oil mixed with

1. Empty fuel tank and refill with

 

smokes

 

gasoline.

 

correct fuel mixture.

 

excessively.

 

 

 

 

 

Chain moves

1. Idle speed requires

1. See “Carburetor Adjustment” in the

 

at idle speed.

 

adjustment.

 

Service and Adjustments Section.

 

 

2. Clutch requires repair.

2.

Contact an authorized service dealer.

 

 

 

 

 

 

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Manual de Instrucciones Manuel d’Instructions Starting Reminder Plan AheadHandle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackAvoid Pinch-Kickback Maintain ControlReduce the Chance of Kickback Avoid Pull-InKickback Safety Features Chain Brake and CKA AngleAttaching the Bumper Spike If not already attached AssemblyComputed kickback angle CKA Table Attaching the BAR & Chain If notChecking the tension Adjusting the tensionAdjusting Screw Tensioning Rack Tip BarKnow Your SAW ON/STOP SwitchOperation Throttle TriggerCHOKE/FAST Idle Lever Chain BrakeChain Tension Difficult Starting or starting a flooded engine Important Points to RememberStarting a Warm Engine To stop the engine move the ON/STOPInertia activating function control Cutting MethodsBraking function control Important PointsCutting a Fallen Tree Felling Large TreesNotch CUT and Felling the Tree Types of Cutting Used for BuckingLimbing and Pruning Important Points Bucking Using a LOG or Support StandBucking Without a Support LimbingPruning ServiceCleaning the Spark Arresting Screen AIR FilterIdle Speed-T Carburetor AdjustmentsBAR Maintenance Back View of MufflerTo Sharpen Chain Chain SharpeningTools required RightStorage Troubleshooting Table Cause Remedy Load Adjustment EngineEmpty fuel tank and refill with Poulan PRO Limited WarrantyCanada, contact Ligations The U.S. EnvironmentalNANCE, Replacement and Repair of Emission Related Parts Any

952802075 specifications

The Poulan 952802075 is a well-regarded, lightweight trimmer designed for both homeowners and professionals looking to maintain their lawns and gardens efficiently. One of its standout features is the 25cc 2-cycle gas engine, which provides ample power to tackle even the most challenging landscaping tasks. This engine is specifically designed for superior performance, delivering reliable starting and smooth operation, making it particularly user-friendly for those who may not be experienced with outdoor power equipment.

A key characteristic of the Poulan 952802075 is its versatility. It comes equipped with a detachable head that allows users to switch between various attachments, such as a string trimmer, hedge trimmer, and blower, catering to different gardening needs. This versatility is further enhanced by the inclusion of a dual-line bump head, which ensures efficient cutting and reduces the amount of time spent trimming grass and weeds.

Ergonomics play a considerable role in the design of the Poulan 952802075. The trimmer features a straight shaft, which allows for better reach under bushes or around flower beds, promoting more efficient trimming in tight spaces. Additionally, the easy-grip handle provides comfort during prolonged use, minimizing fatigue for the operator.

Poulan’s commitment to innovation is evident in the incorporation of advanced technologies into the 952802075 model. The trimmer features a simplified starting system, which reduces the effort required to start the engine, making it more accessible for all users. Furthermore, the design includes features aimed at reducing vibration, which not only enhances user comfort but also leads to extended operating periods without discomfort.

Another notable characteristic of the Poulan 952802075 is its lightweight construction, making it easy to maneuver without sacrificing durability. Despite its lightweight nature, the trimmer is built to withstand the rigors of outdoor work, ensuring longevity and reliability.

In summary, the Poulan 952802075 combines power, versatility, and user-friendly features in a well-designed package, making it an excellent choice for anyone looking to maintain their outdoor spaces efficiently. Its advanced technology, ergonomic aspects, and lightweight build set it apart as a leading option in the outdoor power equipment market. This trimmer ultimately serves as a dependable tool for achieving a well-kept yard with minimal hassle.
Top Page Image Contents