Poulan 176038 owner manual Tractor, Brake Operation, Tires, Operator Presence System, Blade Care

Page 15

CUSTOMER RESPONSIBILITIES

TRACTOR

Always observe safety rules when performing any mainte- nance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 9)

•Raise mower to highest position to allow access to blades.

•Remove hex bolt, lock washer and flat washer securing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Reassemble hex bolt, lock washer and flat washer in exact order as shown.

•Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

TRAILING

MANDREL

ASSEMBLY

EDGE UP

 

 

CENTER

 

HOLE

LOCK WASHER

STAR

BLADE

FLAT WASHER

HEX BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 9

TO SHARPEN BLADE (See Fig. 10)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and even- tual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer).

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 10

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model NO. PO14542B Safe Operation Practices for Ride-On Mowers Safety RulesTable of Contents Customer Responsibilities Product SpecificationsUnassembled Parts Steering Wheel SeatKeys Before Removing Tractor from Skid AssemblyTools Required for Assembly To Remove Tractor from CartonHOW to SET UP Your Tractor Check Battery See FigInstall Seat See Fig Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor HOW to USE Your Tractor Towing Carts and Other ATTACH- Ments Before Starting the EngineTo Operate on Hills To TransportMowing Tips ADD GasolineTo Start Engine See Fig Before Each USE ¿ Lubrication ChartCustomer Responsibilities General RecommendationsOperator Presence System TractorBrake Operation TiresTransaxle Cooling BatteryEngine BeltsEngine Cooling Fins See Fig Clean AIR Screen See FigTo Service PRE-CLEANER To Service CartridgeIN-LINE Fuel Filter See Fig CleaningMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig Belt Removal To Level Mower HousingBelt Installation To Replace Mower Blade Drive Belt See FigFront Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentInterlocks and Relays Replacing Battery SeeTo Remove Hood and Grill Assembly See Fig To Replace Headlight BulbFinal Setting To Adjust Throttle Control Cable See FigTo Adjust Carburetor See Fig Preliminary SettingEngine OIL StorageOther Fuel SystemTroubleshooting Points OFF Tractor - Model Number PO14542B Schematic2122 Electrical175158 175566175141 Chassis and Enclosures 155924X012 117 110 111 115 Drive174973 154407 Bellcrank Clutch173898 Steering Assembly KEY Part NO. NO. Description Engine 170551 14831517060620 Seat Assembly Wheels & Tires DecalsMower Lift Nut Lock w/Wsh 1/2-13 Unc Mower Deck 171977 165898174284 Service Notes Limited Warranty C U M SEH Only Ride UP and Down Hill Suggested Guide for Sighting Slopes for Safe Operation

176038 specifications

The Poulan 176038 is a high-performance gas-powered chainsaw designed for both home and professional use. Known for its powerful engine and reliable performance, this model has become popular among landscapers, farmers, and DIY enthusiasts alike. One of the standout features of the Poulan 176038 is its robust 38cc engine, which provides adequate power for a variety of cutting tasks, from trimming branches to felling trees. The chainsaw is equipped with a 16-inch bar and chain, allowing for efficient cutting while maintaining a lightweight design.

One significant technology integrated into the Poulan 176038 is the easy-start mechanism, which simplifies the starting process, reducing the effort needed to get the saw running. This feature is especially useful for beginners or those who may find traditional pull-start mechanisms challenging. Additionally, the Chainsaw has an adjustable fuel and oil mixture, allowing users to customize performance based on their specific needs and the type of job at hand.

Safety is a priority with the Poulan 176038, and it includes several features to protect the user. The chainsaw is equipped with a chain brake that quickly stops the chain rotation in case of kickback, reducing the risk of injury. Moreover, it features a tensioning system for quick adjustments to the chain without the need for additional tools, enhancing both usability and safety.

Another remarkable characteristic of this chainsaw is its lightweight design, weighing around 10 pounds, which makes it easy to handle for extended periods without causing fatigue. This portability is advantageous for users who need to perform extensive cutting tasks in various locations.

The Poulan 176038 also boasts an anti-vibration system, making operation smoother and more comfortable. This system helps to minimize operator fatigue, allowing users to work longer without discomfort. Overall, the Poulan 176038 stands out as an efficient, user-friendly chainsaw that balances power, safety, and convenience, making it an excellent choice for both casual users and professionals seeking to tackle various cutting tasks with ease. Whether you are maintaining your garden or handling more significant woodcutting jobs, the Poulan 176038 delivers in performance and reliability.
Top Page Image Contents