Chain Sharpening, Ignition Timing, Spark Plug

Remove Sawdust From

Guide Bar Groove

Sprocket Hole

Oil Holes

SAdd lubricant to sprocket hole after each use.

S Burring of guide bar rails is a normal process of rail wear. Remove these burrs with a flat file.

SWhen rail top is uneven, use a flat file to re- store square edges and sides.

File Rail Edges

and Sides

Square

Worn Groove

Correct Groove

Replace guide bar when the groove is worn, the guide bar is bent or cracked, or when excess heating or burring of the rails occurs. If replacement is necessary, use only the guide bar specified for your saw in the repair parts list or on the decal located on the chain saw.

CHAIN SHARPENING

Chain sharpening is a complicated task that requires special tools. We recommended you refer chain sharpening to a professional chain sharpener.

IGNITION TIMING

Ignition timing is fixed and nonadjustable.

SPARK PLUG

The spark plug should be replaced each year to ensure the engine starts easier and runs better.

SLoosen 3 screws on cylinder cover. S Remove the cylinder cover.

S Pull off the spark plug boot.

S Remove spark plug from cylinder and dis- card.

S Replace with Champion RCJ--7Y spark plug and tighten with a 3/4 inch socket wrench (10-12 ft/lbs). Spark plug gap should be 0.025 inches.

S Reinstall the spark plug boot.

S Reinstall the cylinder cover and 3 screws (15-20 in/lbs).

Screws

Cylinder

Spark

Cover

Plug Boot

Spark

Plug

STORAGE

WARNING: Stop engine and allow to cool, and secure the unit before storing or transporting in a vehicle. Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. Store unit with all guards in place. Position so that any sharp object cannot accidentally cause injury to passersby. Store the unit out of reach of children.

S Before storing, drain all fuel from the unit. Start engine and allow to run until it stops.

SClean the unit before storing. Pay particular attention to the air intake area, keeping it free of debris. Use a mild detergent and sponge

to clean the plastic surfaces.

SDo not store the unit or fuel in a closed area where fuel vapors can reach sparks or an

open flame from hot water heaters, electric motors or switches, furnaces, etc.

SStore in a dry area out of the reach of chil- dren.

CAUTION: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose, or fuel tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to fuel mixture separation and formation of acids during storage. Acidic gas can damage the engine.

NEED ASSISTANCE?

Call 1--800--554--6723.

NEED SERVICE PART?

Contact your dealer or place of purchase.

530088786 specifications

The Poulan 530088786 is a high-performance chainsaw designed for a variety of cutting tasks, making it an essential tool for both professional landscapers and enthusiasts. This powerful chainsaw features a robust 42cc, 2-cycle engine that offers impressive cutting power while maintaining a manageable weight for ease of use. The engine is designed to deliver high torque, which enhances cutting efficiency, allowing users to tackle tough jobs with confidence.

One of the standout features of the Poulan 530088786 is its Easy Start technology. This innovative system reduces the effort required to start the chainsaw, making it accessible for users of all skill levels. Simply pull the starter cord, and the advanced starting mechanism takes care of the rest, minimizing frustration and wasted time during setup.

Additionally, the chainsaw is equipped with a 16-inch guide bar and a low-profile chain that ensures smooth and precise cuts. This combination is ideal for cutting firewood, trimming trees, and performing various landscaping tasks. The lightweight design helps reduce user fatigue, making it a suitable choice for prolonged usage without compromising on performance.

Safety is a priority with the Poulan 530088786. It features a built-in chain brake that engages automatically to stop the chain in the event of kickback, greatly enhancing user safety. The chainsaw also includes an anti-vibration system that significantly reduces vibrations during operation, ensuring a more comfortable experience.

Another noteworthy characteristic of the Poulan 530088786 is its durability. The body is constructed from high-quality materials, designed to withstand the rigors of outdoor use. The chainsaw's air filter system further increases its lifespan by preventing debris from entering the engine, resulting in less maintenance and prolonged performance.

Easy maintenance is another aspect that sets the Poulan 530088786 apart. The tool-less chain tensioning mechanism allows users to quickly and easily adjust the chain without the need for additional tools. This feature is particularly beneficial when working in the field, where efficiency is crucial.

In summary, the Poulan 530088786 is a versatile chainsaw that combines power, safety, and user-friendly features. With its reliable engine, innovative technologies, and durable construction, it is well-suited for a wide range of cutting applications. Whether you're a seasoned professional or a DIY enthusiast, this chainsaw provides the performance and reliability needed to tackle any project.