Compaq EP Series manual Removal and Replacement Procedures, Disassembly Sequence Chart

chapter 4

REMOVAL AND REPLACEMENT PROCEDURES

This chapter provides general service information for the computer. Adherence to the procedures and precautions described in this chapter is essential for proper service.

After completing all necessary removal and replacement procedures, run the Diagnostics utility to verify that all components operate properly.

4.1Disassembly Sequence Chart

Use the chart below to determine the disassembly sequence for removing components from the computer.

4.3Computer Feet

4.4Logo Plate

4.5Cable Lock

4.6Access Panel

4.7Front Bezel

4.8Power Button

4.9Subpanel and Bezel Blanks

4.10Power Switch

4.11.1Removing an Internal 3.5-Inch Hard Drive

4.11.2Removing an External 5.25-Inch Drive

4.11.3Removing an External 3.5-Inch Drive 4.12 Removing the Drivelocks

4.13.3Removing an Expansion Board

4.14 Board Guide

4.15System Memory

4.16.1AGP Graphics Board Removal

4.16.2AGP Graphics Memory Upgrade

4.17.1Processor

4.17.2Processor Guide Rails

4.18 System Board

4.19Internal Speaker

4.20Lithium Battery

4.21Fan Assembly

4.22Power Supply

4.23Converting a Desktop to a Minitower

4.24Converting a Minitower to a Desktop

Compaq Deskpro EP Series of Personal Computers 4-1