Manuals / Compaq / Computer Equipment / Personal Computer

Compaq EP Series manual Installing a Drive in the Minitower Configuration

Models: EP Series

1 126

Download 126 pages 9.37 Kb

Page 92

Installing a Drive in the Minitower Configuration

6.Rotate the drives 90 degrees, then reinstall them into the drive bays.

✎The diskette drive should always be placed in bay number 3, the bay nearest the internal 3.5-inch drives, for proper placement within the chassis.

Installing a Drive in the Minitower Configuration

CAUTION: The use of unnecessary force may result in damage to the drives.

Compaq Deskpro EP Series of Personal Computers

4-49

Image 92

Compaq EP Series manual Installing a Drive in the Minitower Configuration

Contents

Maintenance & Service Guide Compaq Deskpro EP Series of Personal ComputersGuide to Features & Upgrades Compaq Deskpro EP Series of Personal ComputersCompaq Computer Corporation Maintenance & Service GuideCompaq Deskpro EP Series of Personal Computers CONTENTS Removal and Replacement Preliminariespreface About This Guidechapter Removal and Replacement Proceduresiv Contents Connectors, Jumpers, and Switches SpecificationsService Notes chapterSymbols and Conventions prefaceABOUT THIS GUIDE Technician NotesLocating Additional Documentation Compaq Service Advisories and Bulletins Compaq QuickFindTechnical Reference Guide Compaq Service Quick Reference Guide The following documentation is available to support these productschapter PRODUCT DESCRIPTIONCompaq Deskpro EP Series of Personal Computers Compaq Deskpro EP Series of Personal Computers1.1 Model Overview 1.2 System Design Online Safety & Comfort Guide English only 1.3 Preinstalled Software1.3.1 Ordering Additional Software 1.4 Computer Features 1.4.1 Front Panel Controls and LEDs - 440BX1.4.2 Front Panel Controls and LEDs - Intel 810/810e Front Panel Controls and LEDs - Intel 810/ 810eComponent/Function Component/Function1.4.3 Rear Panel Connectors - 440BX Rear Panel Connectors - 440BXComponent Component1.4.4 Rear Panel Connectors - Intel 810/810e Rear Panel Connectors - Intel 810/810eComponent Component1.4.5 Drive Positions ConfigurationDrive bay numbers are stamped on the chassis Drive Positions1.5 Serial Number Location Serial Number Locationschapter SPARE PARTS2.1 System Unit 2.1.1 System Unit - 440BXSystem Unit Spare Parts - 440BX Model 2-2 Spare PartsCompaq Despro EP Series of Personal Computers System Unit Spare Parts - 440BXMajor Differences Between 440BX and Intel 810/810e 2-4 Spare Parts 2.1.2 System Unit - Intel 810/810eSystem Unit Spare Parts - Intel 810/810e Model System Unit Spare Parts - Intel 810/810e Major Differences Between 440BX and Intel 810/810e2-6 Spare Parts 2.2 Mass Storage DevicesMass Storage Devices Mass Storage Devices 2-8 Spare Parts 2.3 CablesCables Cables DescriptionSpare Part Number Cable Kit includes2-10 Spare Parts 2.4 Standard and Optional BoardsStandard and Optional Boards Standard and Optional Boards Not shownStandard and Optional Boards, continued 2-12 Spare Partsand thermal interface. Use on 010697-101 system board Standard and Optional Boards ContinuedCompaq Despro EP Series of Personal Computers Standard and Optional Boards Continued PREMIER ∙SOUND 440BXCompaq PREMIER ∙SOUND board 2-14 Spare PartsCompaq Despro EP Series of Personal Computers 2.5 KeyboardsKeyboards 2.6 Miscellaneous Hardware Kit Miscellaneous HardwareMiscellaneous Hardware Kit 2-16 Spare Parts2.7 Miscellaneous Plastics Kit Miscellaneous Plastics Kit, Desktop and MinitowerMiscellaneous Plastics Kit Compaq Despro EP Series of Personal Computers2.8 Miscellaneous Parts Miscellaneous PartsMiscellaneous Parts 2-18 Spare Parts2.9 Shipping Boxes 2.10 Documentation and SoftwareShipping Boxes not illustrated Documentation and Software not illustratedREMOVAL AND REPLACEMENT PRELIMINARIES 3.1.1 Cleaning Safety Precautions3.1.2 Cleaning the Computer Case 3.1 Routine Care3.1.5 Cleaning the Mouse 3.1.3 Cleaning the Keyboard3.1.4 Cleaning the Monitor 3.2.2 Preventing Electrostatic Damage to Equipment 3.2 Electrostatic Discharge Information3.2.1 Generating Static 3.2.3 Personal Grounding Methods and Equipment 3.2.4 Grounding Workstations3.2.5 Recommended Materials and Equipment Static Shielding Protection Levels3.3 Service Considerations 3.3.3 Cables and Connectors3.3.1 Tools and Software Requirements 3.3.2 Screws3.3.4 Hard Drives 3.3.5 Plastic Partschapter REMOVAL AND REPLACEMENT PROCEDURES4.1 Disassembly Sequence Chart 4.2 Disassembly Preparation 4.3 Feet Installation Installing the Feet4.4 Logo Plate Replacing the Compaq Logo Plate4.5 Cable Lock 4-6 Removal and Replacement Procedures To remove the cable lock provision, reverse the above procedureInstalling the Cable Lock Provision - Intel 810/810e 4.6 Access Panel 4.7 Front Bezel Removing the Front Bezel4.8 Power Button Removing the Power Button4.9 Subpanel and Bezel Blanks Removing the Subpanel and Bezel Blanks4.10 Power Switch Disconnecting the Power Switch4.11 Mass Storage Devices Drive PositionsUsing the Cable-Select Feature with Ultra ATA Devices Unlocking the Drives 4.11.1 Removing an Internal 3.5-Inch Hard DriveDisconnecting the Cables 8. Remove the four guide screws from the drive 4.11.2 Removing an External 5.25-Inch Drive Releasing the DrivesRemoving an External 5.25-inch Drive 4.11.3 Removing an External 3.5-Inch Drive 4-18 Removal and Replacement Procedures8. Remove the drive bezel To replace the drive, reverse the previous procedures 4.12 Removing the Drivelocks Drivelock Mechanism4-21 Compaq Deskpro EP Series of Personal Computers4-22 Removal and Replacement Procedures Removing the Drivelock Mechanism11. Remove the spring from the post see inset 4.13 Expansion Boards 4.13.1 440BX4-24 Removal and Replacement Procedures Deskpro EP Expansion Slots - 440BX 2-DIMM Model4.13.2 Intel 810 and 810e Deskpro EP Expansion Slots - IntelDeskpro EP Expansion Slots - Intel 810e 4-254.13.3 Removing an Expansion Board Removing the Expansion Board4.13.4 Installing an Expansion Board Removing the Expansion Board Slot Cover6. Secure the board to the chassis with the retaining screw 4.14 Board Guide Removing the Board Guide4.15.2 Intel 810/810e 4.15 System Memory4.15.1 440BX Installing a DIMM Module 4.16 AGP Graphics Board 440BX 4.16.1 AGP Graphics Board Removal 440BX4.16.2 Graphics Memory Upgrade 440BX Installing the Memory Module4.17 Processor Components 4.17.1 ProcessorTo install a new processor, reverse this procedure 4-36 Removal and Replacement Procedures 4.17.2 Processor Guide Rails Removing the Processor RailsReinstall the system board in the computer chassis 4.18 System Board Removing the System Board4.19 Internal Speaker Removing the Speaker From the Side of the Drive CageTo install the new speaker, reverse the preceding steps Removing the Speaker From the Rear of the Chassis4-41 Compaq Deskpro EP Series of Personal Computers4.20 Lithium Battery Locating the Battery on the System Board - 440BXLocating the Battery on the System Board - Intel Locating the Battery on the System Board - Intel 810e4-43 Compaq Deskpro EP Series of Personal Computers5. Lift the battery out of the holder 4.21 Fan Assembly Removing the Fan4.22 Power Supply Removing the Power Supply - 440BXTo replace the power supply, reverse the above procedure Removing the Power Supply - Intel 810/810e4-47 Compaq Deskpro EP Series of Personal Computers4.23 Converting a Desktop to a Minitower Activating the Drivelocks Shown from the Rear of the ChassisInstalling a Drive in the Minitower Configuration 7. Reconnect the power, signal, and audio cables to the drives 4.24 Converting a Minitower to a Desktop Installing a Drive in the Desktop Configuration 4-52 Removal and Replacement Procedures8. Reconnect the power, signal, and audio cables to the drives CONNECTORS, JUMPERS, AND SWITCHES 5.1.1 Connectors, Jumpers, and SwitchesConnectors, Jumpers, and Switches - 440BX Three-DIMM Board 5.1 System BoardConnectors, Jumpers, and Switches - 440BX Two-DIMM Board Connectors, Jumpers, and Switches - Intel 810e PCA=010697-1015-2 Connectors, Jumpers, and Switches System Board Overview - 440BX Two-DIMM BoardConnectors, Jumpers, and Switches - Intel 810/810e Two-DIMM Board System Board Overview - Intel 810 Two-DIMM BoardSystem Board Overview - Intel 810e Two-DIMM Board Description5.1.2 Switches Switch SW1 Settings 440BX5.1.3 Jumpers 440BX E50 Jumper Location5-6 Connectors, Jumpers, and Switches Disabling or Clearing the Power-On and Setup Passwords 440BXClearing Configuration Memory CMOS 440BX 5.1.4 Jumpers Intel 810/810e E49 Jumper LocationDisabling or Clearing the Power-On and Setup Passwords Intel 810/810e 5-8 Connectors, Jumpers, and SwitchesClearing Configuration Memory CMOS - Intel 810/810e CMOS Button SW50 Location5.2.1 Using the Cable-Select Feature with Ultra ATA Devices 5.2 Hard Drives5.2.2 Drive Jumper Settings DefinitionSeagate FujitsuMaxtor Ultra ATA Hard Drive Jumper Settings Maxtor Ultra ATA Hard Drive Jumper Settings5-12 Connectors, Jumpers, and Switches DefinitionSPECIFICATIONS 6.1 SpecificationsSystem 6.1.1Interrupts 6.1.26-2 Specifications Hardware IRQ6.1.4 I/O 6.1.3System Function Shipping Configuration Hardware DMASystem Function Shipping Configuration 6-4 SpecificationsI/O Address Hex I/O Continued6.2 Drives 6.1.5 Memory Map1.44-MB Diskette Drive 6.2.16.2.2 6-6 SpecificationsUltra ATA Hard Drives 3.2-GB32X Max 6.2.3 CD-ROM Drives24X Max 40X Max 6-8 SpecificationsCD-ROM continued 6.5 Supported Graphics Resolutions 6.3 Compaq Enhanced Keyboard6.4 2-Button Mouse 6.5.1 ATI RAGE PRO TURBO 1X AGP6.5.2 ATI RAGE PRO IIC AGP 6.5.3 NVIDIA RIVA 128 AGP6.5.4 Matrox MGA G100 AGP 6-10 Specifications6.5.7 Integrated Intel 3D Graphics 6.5.5 Matrox Millenium G200-SD AGP6.5.6 Matrox Millenium G400-SG AGP 440BX440BX 6.6 Audio Controllers6-12 Specifications Intel 810/810e 6-13SERVICE NOTES chapterIndex Page system design, 1-3 specifications system board tools service considerationsUltra ATA devices, 4-13 Ultra ATA hard drive specifications Western Digital EIDE hard drive jumper settings181099-001 134011-004