Poulan 530088786 manual Adjusting the tension, Chain Tension, Checking the tension

Page 6

Fit the chain between the teeth in the sprocket.

SStart at the top of the bar and fit chain into groove around the guide bar.

SPull the bar forward until the chain is snug in the groove of the bar.

SHold guide bar against the saw frame and install the chain brake. Make sure the ad-

justing pin is aligned with the hole in the bar. Remember this pin moves the bar for- ward and backward as the screw is turned.

SReplace the chain brake nuts and tighten finger tight. Once the chain is tensioned you will need to tighten chain brake nuts.

Mount the Bar

Tip of Bar

Proper chain direction

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

Place chain onto the sprocket

CHAIN TENSION

(Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

6

S Lift up the tip of the bar and tighten the chain brake nuts with the bar tool. Torque to 10--15 ft/lbs.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 1950 / 2025 / 2050 2150 / 2175 / 2350 / 2375 LE Series Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Handle Fuel with CautionKickback Reduce the Chance KickbackMaintain Control Kickback Safety Features Chain BrakeSafety Notice Exposure to Attaching the BAR & Chain If notAdjusting the tension Chain TensionChecking the tension Throttle Trigger ON/STOP SwitchKnow Your Chain SAW Throttle LOCK-OUTFueling Engine BAR and Chain LubricationImportant Points to Remember Braking function control Caution The chain brake must be Starting a Warm EngineDifficult Starting or starting a flooded engine Inertia activating function controlTree Felling Techniques Felling Large TreesNotch CUT and Felling the Tree Types of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Without a SupportLimbing PruningLimbing and Pruning Important Points ING Without a SupportBAR Maintenance Cleaning the Spark ARREST- ING ScreenCarburetor Adjustments AIR FilterSpark Plug Chain SharpeningIgnition Timing StorageTroubleshooting Table Cause Remedy MAINTENANCE, RE

530088786 specifications

The Poulan 530088786 is a high-performance chainsaw designed for a variety of cutting tasks, making it an essential tool for both professional landscapers and enthusiasts. This powerful chainsaw features a robust 42cc, 2-cycle engine that offers impressive cutting power while maintaining a manageable weight for ease of use. The engine is designed to deliver high torque, which enhances cutting efficiency, allowing users to tackle tough jobs with confidence.

One of the standout features of the Poulan 530088786 is its Easy Start technology. This innovative system reduces the effort required to start the chainsaw, making it accessible for users of all skill levels. Simply pull the starter cord, and the advanced starting mechanism takes care of the rest, minimizing frustration and wasted time during setup.

Additionally, the chainsaw is equipped with a 16-inch guide bar and a low-profile chain that ensures smooth and precise cuts. This combination is ideal for cutting firewood, trimming trees, and performing various landscaping tasks. The lightweight design helps reduce user fatigue, making it a suitable choice for prolonged usage without compromising on performance.

Safety is a priority with the Poulan 530088786. It features a built-in chain brake that engages automatically to stop the chain in the event of kickback, greatly enhancing user safety. The chainsaw also includes an anti-vibration system that significantly reduces vibrations during operation, ensuring a more comfortable experience.

Another noteworthy characteristic of the Poulan 530088786 is its durability. The body is constructed from high-quality materials, designed to withstand the rigors of outdoor use. The chainsaw's air filter system further increases its lifespan by preventing debris from entering the engine, resulting in less maintenance and prolonged performance.

Easy maintenance is another aspect that sets the Poulan 530088786 apart. The tool-less chain tensioning mechanism allows users to quickly and easily adjust the chain without the need for additional tools. This feature is particularly beneficial when working in the field, where efficiency is crucial.

In summary, the Poulan 530088786 is a versatile chainsaw that combines power, safety, and user-friendly features. With its reliable engine, innovative technologies, and durable construction, it is well-suited for a wide range of cutting applications. Whether you're a seasoned professional or a DIY enthusiast, this chainsaw provides the performance and reliability needed to tackle any project.
Top Page Image Contents