Poulan 530165320-01 Chain Brake and CKA Angle, Front Hand Guard, designed to reduce, 952044370

Page 5

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a contoured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter. Low-- Kickback Chain has met kickback per- formance requirements when tested on a representative sample of chain saws be- low 3.8 cubic inch displacement specified in ANSI B175.1.

Contoured Depth Gauge

 

Elongated Guard Link

 

Deflects

Low--- Kickback

kickback force

and allows wood

Chain

to gradually ride

 

into cutter

 

Can Obstruct Material

Not a Low--- Kickback Chain

SFront Hand Guard, designed to reduce the

chance of your left hand contacting the chain if your hand slips off the front handlebar.

SPosition of front and rear handlebars, de- signed with distance between handles and “in-line” with each other. The spread and “in-line” position of the hands provided by this design work together to give balance and resistance in controlling the pivot of the saw back toward the operator if kick- back occurs.

CHAIN BRAKE AND CKA ANGLE

SChain Brake, designed to stop the chain in the event of kickback.

WARNING: WE DO NOT REP- RESENT AND YOU SHOULD NOT AS- SUME THAT THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICK- BACK. Kickback is a lightning fast action which throws the bar and rotating chain back and up toward the operator. Kickback can be

caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the saw chain along the top of the guide bar. This action may push the guide bar rapidly back toward the op- erator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Reduced--kickback guide bars and low--kickback saw chains reduce the chance and magnitude of kickback and are recommended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an autho- rized servicing dealer. Take your unit to the place of purchase if purchased from a servic- ing dealer, or to the nearest authorized master service dealer.

STip contact in some cases may cause a light- ning fast reverse REACTION, kicking guide bar up and back toward operator.

SPinching the saw chain along the top of the guide bar may push the guide bar rapidly

back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury. Do not rely exclusively upon devices built into your saw.

WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar and chain combinations will have when tested in accordance with CSA (Cana- dian Standards Association) and ANSI stan- dards. When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values repre- sent safer angles to the user, higher values in- dicate more angle and higher kick energies. Computed angles represented indicate total energy and angle associated without activation of the chain brake during kickback. Activated angle represents chain stopping time relative to activation angle of chain break and resulting kick angle of saw. In all cases lower CKA val- ues represent a safer operating environment for the user.

The following guide bar and chain combina- tions meet kickback requirements of CSA Standards Z62.1, Z62.3, & ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard.

Computed kickback angle (CKA) Table

 

BAR

 

 

CKA without chain brake

MODEL

P/N

Length

CHAIN P/N

BH2160 LE

952044370

16″

952051211

19_

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 16/04 English Español FrançaisPlan Ahead Identification of SymbolsSafety Rules Maintain Your SAW in Good Working Order Operate Your SAW SafelyHandle Fuel with Caution KickbackMaintain Control Kickback Safety FeaturesReduce the Chance of Kickback Front Hand Guard, designed to reduce Chain Brake and CKA AngleBack toward the operator 952044370Inside view Chain Brake Adjustment located on Chain Brake AssemblyAttaching the BAR & Chain If not Chain Brake NutsChain Tension Adjusting the tensionChecking the tension Know Your Chain SAW ON/STOP SwitchThrottle Trigger Throttle LOCK-OUTFueling Engine StartingBAR and Chain Lubrication Important Points to RememberImportant Points Cutting MethodsStarting a Warm Engine Felling Large Trees Tree Felling TechniquesNotch CUT and Felling the Tree Direction of FallCutting a Fallen Tree Bucking Using a LOG or Support StandTypes of Cutting Used for Bucking Bucking Without a SupportLimbing and Pruning Important Points ServiceLimbing PruningCleaning the Spark ARREST- ING Screen Cleaning the air filterAIR Filter Inspect Muffler and Spark Arresting ScreenBAR Maintenance Carburetor AdjustmentChain Sharpening Ignition TimingNeed ASSISTANCE? Need Service PART?Storage Need ASSISTANCE?Tions The U.S. Environmental Protection Limited WarrantyPlacement and Repair of Emission

530165320-01 specifications

The Poulan 530165320-01 is a remarkable addition to the landscaping and outdoor power tool market, renowned for its robust features and advanced technologies designed to meet the needs of homeowners and professionals alike. This versatile model serves as a powerful companion for trimming, edging, and maintaining lawns, ensuring that users achieve a professional finish with ease.

One of the standout features of the Poulan 530165320-01 is its impressive engine performance. Equipped with a reliable two-cycle gas engine, it delivers ample power to handle thick grass and stubborn weeds efficiently. The engine’s robust design ensures longevity while providing smooth and consistent power output. This makes it an ideal choice for tackling a variety of landscaping tasks, from simple yard maintenance to more complex projects.

Another significant aspect of the Poulan 530165320-01 is its ergonomic design. The tool is designed with user comfort in mind, featuring a lightweight frame that minimizes fatigue during extended use. The adjustable handle allows users to customize their grip for improved control and maneuverability, making it easier to navigate tight spaces and uneven terrain. Additionally, the anti-vibration technology incorporated in this model helps reduce hand strain, enabling longer working sessions without discomfort.

The Poulan 530165320-01 also boasts a quick and easy starting mechanism, which is particularly beneficial for users who value efficiency. The innovative Easy Start technology minimizes the effort needed to start the engine, ensuring that even novice users can operate the tool without frustration. The automatic line feed system enhances convenience by providing a continuous supply of trimmer line, reducing downtime for reloading.

Moreover, this model features a durable cutting head that is adaptable for various trimming applications. This versatility is a key selling point, allowing users to switch between different cutting attachments, such as blades and string, depending on the specific requirements of their tasks. The durable construction of the cutting head also means it can withstand the rigors of heavy use, providing reliable performance over time.

In summary, the Poulan 530165320-01 is an exceptional choice for anyone in need of a versatile and powerful outdoor tool. Its blend of cutting-edge technology, ergonomic design, and efficient performance ensures that users can tackle any landscaping challenge with confidence and ease. Whether you’re maintaining your garden or handling larger projects, this model stands out as a trusted partner in outdoor work.
Top Page Image Contents