Poulan 530165320-01 instruction manual Checking the tension, Chain Tension, Adjusting the tension

Page 7

Cutters

Depth Gauge

Checking the tension:

 

 

Use the screwdriver end of the chain adjust-

 

 

ment tool (bar tool) to move the chain around

 

 

the bar. If the chain does not rotate, it is too

 

 

tight. If too loose, the chain will sag below the

 

 

bar.

Drive Links

Place chain onto the sprocket

7.Place chain over and behind clutch, fit- ting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

NOTE: CHAIN BRAKE MUST BE DISENGAGED BEFORE INSTALLA- TION ON THE SAW. TO DISENGAGE CHAIN BRAKE, PULL THE FRONT HAND GUARD BACK TOWARD THE REAR OF THE CHAIN BRAKE AS FAR AS POSSIBLE (SEE ILLUSTRA- TION).

DISENGAGED

Front Hand Guard

ENGAGED

Chain Brake

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tight- en only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION

(Including units with chain already installed) NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the chain brake nuts and turning the ad- justing screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

S Lift up the tip of the bar and tighten the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 16/04 English Español FrançaisSafety Rules Identification of SymbolsPlan Ahead Kickback Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with CautionReduce the Chance of Kickback Kickback Safety FeaturesMaintain Control 952044370 Chain Brake and CKA AngleFront Hand Guard, designed to reduce Back toward the operatorChain Brake Nuts AssemblyInside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & Chain If notChecking the tension Adjusting the tensionChain Tension Throttle LOCK-OUT ON/STOP SwitchKnow Your Chain SAW Throttle TriggerImportant Points to Remember StartingFueling Engine BAR and Chain LubricationStarting a Warm Engine Cutting MethodsImportant Points Direction of Fall Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeBucking Without a Support Bucking Using a LOG or Support StandCutting a Fallen Tree Types of Cutting Used for BuckingPruning ServiceLimbing and Pruning Important Points LimbingInspect Muffler and Spark Arresting Screen Cleaning the air filterCleaning the Spark ARREST- ING Screen AIR FilterIgnition Timing Carburetor AdjustmentBAR Maintenance Chain SharpeningNeed ASSISTANCE? Need Service PART?Need ASSISTANCE? StorageTions The U.S. Environmental Protection Limited WarrantyPlacement and Repair of Emission

530165320-01 specifications

The Poulan 530165320-01 is a remarkable addition to the landscaping and outdoor power tool market, renowned for its robust features and advanced technologies designed to meet the needs of homeowners and professionals alike. This versatile model serves as a powerful companion for trimming, edging, and maintaining lawns, ensuring that users achieve a professional finish with ease.

One of the standout features of the Poulan 530165320-01 is its impressive engine performance. Equipped with a reliable two-cycle gas engine, it delivers ample power to handle thick grass and stubborn weeds efficiently. The engine’s robust design ensures longevity while providing smooth and consistent power output. This makes it an ideal choice for tackling a variety of landscaping tasks, from simple yard maintenance to more complex projects.

Another significant aspect of the Poulan 530165320-01 is its ergonomic design. The tool is designed with user comfort in mind, featuring a lightweight frame that minimizes fatigue during extended use. The adjustable handle allows users to customize their grip for improved control and maneuverability, making it easier to navigate tight spaces and uneven terrain. Additionally, the anti-vibration technology incorporated in this model helps reduce hand strain, enabling longer working sessions without discomfort.

The Poulan 530165320-01 also boasts a quick and easy starting mechanism, which is particularly beneficial for users who value efficiency. The innovative Easy Start technology minimizes the effort needed to start the engine, ensuring that even novice users can operate the tool without frustration. The automatic line feed system enhances convenience by providing a continuous supply of trimmer line, reducing downtime for reloading.

Moreover, this model features a durable cutting head that is adaptable for various trimming applications. This versatility is a key selling point, allowing users to switch between different cutting attachments, such as blades and string, depending on the specific requirements of their tasks. The durable construction of the cutting head also means it can withstand the rigors of heavy use, providing reliable performance over time.

In summary, the Poulan 530165320-01 is an exceptional choice for anyone in need of a versatile and powerful outdoor tool. Its blend of cutting-edge technology, ergonomic design, and efficient performance ensures that users can tackle any landscaping challenge with confidence and ease. Whether you’re maintaining your garden or handling larger projects, this model stands out as a trusted partner in outdoor work.
Top Page Image Contents