Poulan 530163637 instruction manual Attaching the BAR & Chain If not, Tip Bar

Page 6

NOTE: If this saw is to be used for commer- cial logging, a chain brake is required and shall not be removed or otherwise disabled to com- ply with Federal OSHA Regulations for Com- mercial Logging.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: Your saw is equipped with a temperature limiting muffler and spark arresting screen which meets the requirements of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington require by law that many internal combustion engines to be equipped with a spark arresting screen. If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. Refer to the SERVICE section for maintenance of the spark arresting screen.

Failure to follow all Safety Rules and Precau- tions can result in serious injury. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your authorized service dealer or call 1-800--554--6723.

STANDARDS: This saw is listed by Under- writer’s Laboratories, Inc., and the Canadian Standards Association in accordance with:

ANSI B175.1-2000American National Standard for Powered Tools -- Gasoline Powered Chain Saw -- Safety Requirements CSA Z62.1-1995Chain Saws -- Occupa- tional Health and Safety

CSA Z62.3-1996Chain Saw Kickback Oc- cupational Health and Safety

Protective gloves (not provided) should be worn during assembly.

ATTACHING THE BAR & CHAIN (If not

already attached)

WARNING: If received assembled, repeat all steps to ensure your saw is properly assembled and all fasteners are secure. Al- ways wear gloves when handling the chain.

6

The chain is sharp and can cut you even when it is not moving!

1.Loosen and remove the chain brake nuts and the chain brake from the saw.

2.Remove the plastic shipping spacer (if present).

Location of shipping spacer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chain Brake

Chain Brake

Nuts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bar Tool

3.Turn adjusting screw on bar counter- clockwise to move the tensioning rack as far as it will go toward the front of the bar.

Adjusting

Screw

Tensioning Rack

4.Slide the bar behind clutch drum until bar stops against clutch drum sprocket.

Mount the Bar

5.Prepare the chain by checking the proper direction. Without following the illustration it is easy to place the chain on the saw in the wrong direction. Use the illustration of the chain to determine the proper direction.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Handle Fuel with Caution Operate Your SAW SafelyMaintain Your SAW in Good Working Order KickbackMaintain Control Kickback Safety FeaturesReduce the Chance Kickback Your left arm straight with the elbow lockedChain Brake and CKA Angle Computed kickback angle CKA TableFront Hand Guard, designed to reduce Attaching the BAR & Chain If not Tip BarAdjusting the tension Chain Tension Including units with chain already installedChecking the tension Throttle Trigger ON/STOP SwitchKnow Your SAW Throttle LockoutFueling Engine BAR and Chain LubricationImportant Points to Remember Braking function control Caution The chain brake must be Starting a Warm EngineDifficult Starting or starting a flooded engine Inertia activating function controlNotch CUT and Felling the Tree Tree Felling TechniquesFelling Large Trees Gine can resultTypes of Cutting Used for Bucking Bucking Using a LOG or Support StandCutting a Fallen Tree Bucking Without a SupportLimbing and Pruning Important Points Cleaning the air filterPruning LimbingInspect Muffler and Spark Cleaning the Spark ARREST- ING ScreenCarburetor Adjustment Arresting ScreenChain Sharpening BAR MaintenanceNeed Service PART? Ignition TimingTroubleshooting Table Cause Remedy Your Warranty Rights and Obliga Tions The U.S. Environmental Protection

530163637 specifications

The Poulan 530163637 is an innovative tool designed for outdoor enthusiasts and professionals alike. Engineered for versatility and efficiency, this unit showcases a range of features that set it apart in the market of power equipment.

One of the standout aspects of the Poulan 530163637 is its powerful engine. It is equipped with a robust 2-cycle engine, which provides ample power to tackle a variety of cutting tasks, from trimming grass to tackling dense brush. The engine’s efficient design not only maximizes cutting performance but also ensures lower fuel consumption, making it an environmentally friendly option for users.

The tool features an easy-to-use, lightweight design that allows for extended periods of use without causing fatigue. Weighing in at a user-friendly level, the Poulan 530163637 ensures that both amateur gardeners and professional landscapers can navigate their work effortlessly. The ergonomic handle enhances comfort and control, reducing the risk of strain during prolonged operation.

Another key characteristic of the Poulan 530163637 is its start technology. The tool employs a reliable starting mechanism that helps users start it on the first pull. This feature is particularly beneficial for those who are less experienced with power equipment, as it minimizes the frustration that often accompanies starting traditional equipment.

The Poulan 530163637 also incorporates advanced cutting technologies, including dual-line feed systems that allow for efficient and precise cutting. This feature ensures that grass and weeds are trimmed quickly and evenly, enhancing the overall aesthetics of lawns and gardens.

The durability of the Poulan 530163637 is another important factor to consider. Constructed from high-quality materials, it is designed to withstand the rigors of outdoor use. The maintenance-friendly design allows for easy access to key components, making routine maintenance tasks like oil changes and air filter replacements straightforward for users.

In summary, the Poulan 530163637 is a powerful, user-friendly outdoor tool designed for efficiency and ease of use. Its combination of a robust engine, lightweight build, advanced cutting technologies, and durable construction makes it an excellent choice for anyone looking to maintain their outdoor spaces effectively. Whether you are a casual gardener or a landscaping professional, the Poulan 530163637 promises to deliver performance and reliability in every application.
Top Page Image Contents