Poulan PP250PT, 115270726, 952711924 Limited Warranty, Troubleshooting Table Cause Remedy

Page 20

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

TROUBLE

CAUSE

REMEDY

 

 

 

 

Engine will not

1. Engine flooded.

1.

See “Starting a Flooded Engine” in

start.

 

 

 

Operation Section.

 

2. Fuel tank empty.

2.

Fill tank with correct fuel mixture.

 

3. Spark plug not firing.

3.

Install new spark plug.

 

4. Fuel not reaching

4.

Check for dirty fuel filter; replace.

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

repair or replace.

 

5. Carburetor requires

5.

Contact an authorized service dealer.

 

 

adjustment.

 

 

 

 

 

 

 

Engine will

1.

Idle speed set too high

1.

See “Carburetor Idle Speed Adjustment”

not idle

 

or too low.

 

in Service and Adjustments Section.

properly.

2.

Crankshaft seals worn.

2.

Contact an authorized service dealer.

 

3.

Compression low.

3.

Contact an authorized service dealer.

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

accelerate,

2. Spark plug fouled.

2.

Clean or replace plug

lacks power,

 

 

 

and regap.

or dies under

3.

Carburetor requires

3.

Contact an authorized service dealer.

a load.

4.

adjustment.

4.

Contact an authorized service dealer.

 

Carbon build-up on

 

 

muffler outlet screen.

5.

Contact an authorized service dealer.

 

5.

Compression low.

Engine

1.

Choke partially on.

1.

Adjust choke.

smokes

2.

Fuel mixture incorrect.

2.

Empty fuel tank and refill with

excessively.

 

 

 

correct fuel mixture.

 

3.

Air filter dirty.

3.

Clean or replace air filter.

 

4.

Carburetor requires

4.

Contact an authorized service dealer.

 

 

adjustment.

 

 

Engine runs

1. Fuel mixture incorrect.

1.

See “Fueling Engine” in Operation

hot.

 

 

 

section.

 

2. Spark plug incorrect.

2.

Replace with correct spark plug.

 

3. Carburetor requires

3.

Contact an authorized service dealer.

 

 

adjustment.

4.

Contact an authorized service dealer.

 

4. Carbon build-up on

 

 

muffler outlet screen.

 

 

Chain moves at

1. Idle speed requires

1. See “Carburetor Adjustment” in

idle speed.

 

adjustment.

 

Service and Adjustments Section.

 

2. Clutch requires repair.

2. Contact an authorized service dealer.

LIMITED WARRANTY

Poulan PRO, a division of Husqvarna Consum- er Outdoor Products N.A., Inc., warrants to the original consumer purchaser that each new Poulan PRO brand gasoline tool or attachment is free from defects in material and workman- ship and agrees to repair or replace under this warranty any defective gasoline product or at- tachment as follows from the original date of purchase.

2 YEARS - Parts and Labor, when used for household purposes.

90 DAYS - Parts and Labor, when used for commercial, professional, or income producing purposes.

30 DAYS - Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance or alteration, or the use of accessories and/or attachments not specifically recommended by Poulan PRO for this tool. This warranty does not cover tune--up, spark plugs, filters, starter ropes, cutting line, or rotating head parts that will wear and require re- placement with reasonable use during the war- ranty period. This warranty does not cover pre-- delivery setup or normal adjustments explained

20

Image 20
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Identification of Safety Symbols Safety Rules Chain when the engine is runningPlan Ahead Operate Your Pruner SafelyMaintain Your Pruner in Good Working Order Handle Fuel with CautionKickback Reduce the Chance KickbackFor Optional Attachments Kickback Safety FeaturesLine Trimmer Safety Edger Safety BLOWER/VACUUM SafetyBrushcutter Safety Running or when cutting blade is movingSnow Thrower Safety Cultivator SafetyHedge Trimmer Safety Assembly Installing Pruner ATTACH- MentTools Required Other hidden hazardsTo Relocate Shoulder Strap Clamp Shoulder Strap AssemblyAdjusting the Assist Handle Operation HOW to Stop Your Unit HOW to Start Your UnitBAR and Chain Lubrication Starting a Cold EngineInstalling Optional ATTACH- Ments Installing Attachment HangerOperating the Coupler Removing Pruner Attachment or Other Optional ATTACH- MentsFoot Pruning Important PointsPruning Technique Maintenance Service and Adjustments To Replace Chain Chain ReplacementTo Sharpen Chain Chain Adjustment Carburetor Idle Speed AdjustmentSeasonal Storage Fuel SystemEngine OtherLimited Warranty Troubleshooting Table Cause RemedyEmpty fuel tank and refill with See Fueling Engine in OperationStatesville Road Ligations The U.S. EnvironmentalPlacement and Repair of Emission