Infinity CAS 3.1, CAS 2.1 manual Specifications, Dimensions

Page 12

SPECIFICATIONS

 

CAS 3.1

CAS 2.1

Woofer:

9" C.M.M.D.

7-1/2" C.M.M.D.

Midrange:

3-1/2" C.M.M.D.

Tweeter:

1" C.M.M.D.

1" C.M.M.D.

System Frequency

 

 

Response:

 

 

(+3dB)

32Hz*– 22,000Hz

40Hz*– 22,000Hz

Sensitivity:

90dB

90dB

(2.83V @ 1 meter)

 

 

Recommended Amplifier

 

 

Power Range:

15 – 200 Watts

15 – 150 Watts

Nominal Impedance:

8 Ohms

8 Ohms

Crossover Frequency:

400Hz, 2,800Hz; 24dB/octave

2,800Hz; 24dB/octave

Dimensions:

 

 

Outer (including grille)

22-1/8" x 14-7/8" x 3-1/2"**

17-7/8" x 13" x 3-1/2"**

(H x W x D)

(562mm x 378mm x 89mm)

(454mm x 330mm x 89mm)

Wall Cutout

19-1/8" x 12-1/2"

14-7/8" x 10-1/2"

(H x W)

(486mm x 318mm)

(378mm x 267mm)

Weight:

15 lb (6.8kg)

11 lb (5kg)

(including frame, speaker and grille)

 

 

**Depending upon enclosure volume. See page 11 for detailed information. **Depth excludes grille.

Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and

related Infinity publications are therefore subject to change without notice.

Declaration of Conformity

We, Harman Consumer International

2, route de Tours

72500 Chateau-du-Loir

France

declare in own responsibility, that the products described in this

owner’s manual are in compliance with technical standards:

EN 50081-1:1992

EN 50082-1:1997

Robin Marshall

Harman Consumer International

Chateau-du-Loir, France. 10/01

© 2001 Infinity Systems, Inc., 250 Crossways Park Drive, Woodbury, NY 11797 USA (800) 553-3332 (USA Only) www.infinitysystems.com

*Trademarks of Dolby Laboratories. THX name and logo are © Lucasfilm Ltd. & trademarked. All rights reserved. Used under authorization. Infinity is a registered trademark of Infinity Systems, Inc. Printed in USA 12/01 Part No. 337581-001

Image 12
Contents CAS 3.1 and CAS Technology Unpacking the Product IncludedPlacement Speakers are installed withSurround Channels in a Home Theater System Such as during a partyInstallation Installation Instructions StepTools Needed IR SensorClampscrew Wall Fiberglass Insulation Mounting Frame For Removal Pull out side clips on sides of the grille. Pull grille offStandard Wiring BI-WIRING Single-Stereo AmplifierInstaller Information EnclosuresThiele/Small Parameters Specifications Dimensions