Alarm

You can select 1 of the 5 following languages:

English

Each display will be backlit for 5 seconds and will return to the main screen display after 10 seconds.

HOURLY CHIME

German

French

Italian

Spanish

Press MODE / LIGHT to toggle between the following clock displays:

•RF time with hour-offset time (HH:MM)

•Day of the week

•Calendar

•RF time without offset

•Time-zone hour-offset setting

The hourly chime function when set to ON will beep once at the beginning of every hour, and the chime icon will show on the display.

This product is equipped with a 2-minute crescendo alarm.

VIEW ALARM SETTINGS

Press ALARM. The alarm time and status will show in the Clock Area.

1. Press ALARM to switch to alarm display.

2.Press and hold ALARM again, for 2 seconds. The alarm settings will blink.

3.Select the hour and minute. Press UP or DOWN to change settings. Press ALARM to confirm. The alarm will be activated automatically.

Press ALARM twice to start toggling between alarm ON and alarm OFF.

shows in the Clock / Alarm Area when the alarm is activated.

NOTE Press MODE, or wait 1 minute to return to clock display.

When the alarm time is reached, the crescendo alarm will sound for 2 minutes and the backlight will turn on for

5 seconds. To silence the alarm:

• Press on the remote control to silence it for 8 minutes.

•Press any key on the main unit or remote control

except to mute the alarm and activate it again after 24 hours.

If no button is pressed, the alarm will automatically silence after 2 minutes.

BAR289 ENG R7 OP

8/20/04, 11:00 PM

Black