To select the wind speed unit:
Press UNIT (at the bottom of the base station) to switch between:
•Metres per second (m / s)
•Kilometers per hour (kph)
•Miles per hour (mph)
•Knots (knots)
The wind level is shown by a series of icons:
ICON | LEVEL | DESCRIPTION |
|
|
|
| N/A | <2 mph (<4km/h) |
|
|
|
| Light | |
|
|
|
| Moderate | |
|
|
|
| Strong | |
|
|
|
| Storm | >55 mph (>88 km/h) |
|
|
|
To display the AVERAGE and GUST wind:
1.Press SELECT to navigate to the Wind Speed and Wind Direction Area. 
will show next to the Area.
2.Press MODE to toggle between AVERAGE and GUST wind readings.
To display the maximum speed and direction for gust wind:
In the Wind Speed and Wind Direction Area, press MEMORY / 
ON / OFF to toggle between wind speed
/MAX GUST wind readings. The timestamp is displayed accordingly in the Clock Area.
To clear the memories and timestamp for the wind readings:
In the Wind Speed and Wind Direction Area, press and hold MEMORY / 
ON / OFF to clear the readings.
To change the high gust wind speed alarm:
1.In the Wind Speed and Wind Direction Area, press and hold ALARM to enter the high gust wind alarm setting.
2.Rotate the dial left or right to set the desired values.
3.Press ALARM to confirm the settings.
To activate / deactivate the high gust wind speed alarm:
1.In the Wind Speed and Wind Direction Area, press ALARM repeatedly to select the desired alarm.
2.Press MEMORY / 
ON / OFF to activate or deactivate the alarm.
UVI / BAROMETER / RAINFALL
The weather station works with one UV sensor and one rain gauge. The station is capable of storing and displaying the hourly history data for the last 10 hours
of UV index, and 24 hours of rainfall and barometric pressure readings.
UVI | BAROMETER | RAINFALL |
|
|
|
|
|
|
The bar chart display shows the current and historical data for the UV index, barometric pressure and rainfall readings.
To view the UV / Barometer / Rainfall readings:
1. Press SELECT to navigate to the UV / Barometer /
Rainfall Area. | will show next to the Area. |
2.Press MODE to toggle between UVI / Barometer / Rainfall readings. The corresponding icon will appear:
UVI | BAROMETER | RAINFALL |
|
|
|
|
|
|
3.Rotate the dial left or right to view the historical data for the selected area. The corresponding historical readings are showing.
NOTE The number shown in the HR icon indicates how long ago each measurement was taken (e.g. 2 hours ago, 3 hours ago, etc.).
To select the measurement unit for the barometer or rainfall readings:
In the UV / Barometer / Rainfall Area, press UNIT (at the bottom of the base station) to switch between:
•Barometer: Millimeters of mercury (mmHg), inches of mercury (inHg), millibars per hectopascal (mb / hpa).
•Rainfall: Millimeters (mm), inches (in), inches per hour (in / hr) or millimeters per hour (mm / hr).
UV INDEX
The UV index levels are as follows:
UV INDEX | DANGER LEVEL | ICON |
|
|
|
Low |
| |
Moderate |
| |
|
|
|
High |
| |
|
|
|
Very high |
| |
11 and above | Extremely high |
|
|
|
|
To change the high UV alarm:
1.In the UV / Barometer / Rainfall Area and UVI reading display. Press and hold ALARM to enter the high UV alarm setting.
EN
11