Oregon Scientific WMR100NA Clock / Calendar, Clock Alarm, Moon Phase, Auto Scanning Function

NOTE For best reception, the base station should be placed on a flat, non-metallic surface near a window in an upper floor of your home. The antenna should be placed away from electrical appliances and not be moved around when searching for a signal.

CLOCK / CALENDAR

To manually set the clock:

(You only need to set the clock and calendar if you have disabled the clock radio reception).

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press and hold MODE to change the clock setting. The setting will blink.

3.Rotate the dial left or right to decrease or increase the setting value.

4.Press MODE to confirm.

5.Repeat steps 1 to 5 to set the time zone offset hour (+ / -23 hours), 12 / 24 hour format, hour, minute, year, date / month format, month, date and weekday language.

NOTE If you enter +1 in the time zone setting, this will give you your regional time plus 1 hour.

If you are in the US (WMR100NA only) set the clock to:

0 for Pacific time	+1 for Mountain time
+2 for Central time	+3 for Eastern time.

NOTE The weekday is available in English, German, French, Italian or Spanish.

To change the clock display:

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press MODE to toggle between:

•Clock with Seconds

•Clock with Weekday

•Calendar

CLOCK ALARM

The clock has 2 alarms that can be set to sound with a beep.

ICON	MEANING
	Alarm 1 or 2 is displayed
	Alarm 1 or 2 is activated
No icons	No alarm is set

To set an alarm:

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.Press ALARM to toggle between alarm 1 and

alarm 2 display.

3.When you’ve selected the alarm you wish to change, press and hold ALARM. The alarm setting will blink.

4.Rotate the dial left or right to change the setting.

5.Press ALARM to confirm.

To activate / deactivate an alarm:

1.Press SELECT to navigate to the Clock Area. will show next to the Area.

2.	Press ALARM to toggle between alarm 1	and
	alarm 2 .
3.	Press MEMORY / ON / OFF to activate or
	deactivate the alarm. or appears when the
	alarm is activated.

MOON PHASE

The Calendar must be set for this feature to work (see Clock / Calendar section).

New Moon	Full Moon
Waxing	Waning
Crescent	Gibbous
First quarter	Third
	quarter
Waxing	Waning
Gibbous	Crescent

AUTO SCANNING FUNCTION

To activate the outdoor temperature and humidity auto-scan function:

1.Press SELECT to navigate to the Temperature or Humidity Area. will show next to the Area.

2.Press and hold MODE to activate auto-scan. The temperature and humidity display will scroll from indoor to ch1 through to ch10.

3.Press MEMORY / ON / OFF or MODE or ALARM to stop the auto-scan.

NOTE Channel 1 is used for the outdoor temperature and humidity sensor. Additional temperature and humidity sensors can use other channels.

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius.

Weather Forecast Area

ICON	DESCRIPTION
	Sunny
	Partly cloudy
	Cloudy
	Rainy
	Snowy

EN

9