Oregon S402022H0/S402022K0 owner manual Intended USE, Personal Protective Equipment, Safety Decals

Page 3

WARNING: Read and thoroughly understand all instructions in this manual and on safety decals before assembling or operating this log splitter. Failure to do so may cause serious injury or death. Do not allow anyone to operate this log splitter who has not read this manual. As with all power equipment, a log splitter can be dangerous if assembled or used improperly. Do not operate this log splitter if you have any questions concerning safe operation. To get answers to any questions, call our customer service department at 1-800-525-8322.

Si no entiende ingles, se prefiere que busque alguien que interprete las instrucciones para usted.

This is the SAFETY ALERT SYMBOL. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result in serious injury or death.

WARNING indicates a hazardous situation which, if not avoided, could result in serious injury or death.

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

INTENDED USE

NEVER use this log splitter for any other purposes than splitting wood. It is designed for this use only. Any other use can cause serious injury or death.

PERSONAL PROTECTIVE EQUIPMENT

BEFORE operating this log splitter, make sure that you wear safety gear such as goggles or safety glasses, steel toed shoes and tight fitting gloves (without loose cuffs or draw strings). Always wear a protective hearing device when operating this log splitter.

SAFETY DECALS

Make sure that all safety warning decals are in good condition and readable. Always replace missing or defaced decals. Contact SpeeCo at 1-800-525-8322 for replacement decals.

PART NUMBER: S52062500,

LOCATION: TOP, FRONT END OF TONGUE

Page 1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents VERTICAL/HORIZONTAL 22 TON LOG Splitter Table of Contents Safety Decals Intended USEPersonal Protective Equipment Location Hydraulic Tank Lower TANK, Right Corner General Safety Work AreaPreparation of the LOG General Repair Operation of the LOG SplitterFire Prevention Maintenance & SafetyTowing Safety Assembly Instructions Item no Decsription QTYItem no Description QTY Beam 3/4 R Clip Pin Tank/Tongue Assembly Pivot Pin Item no Descrption QTY Wheel Assembly Breakdown Item NO. Part no Description QTY Replacement PartsItem no Description QTY Beam Assembly BreakdownItem no Description Tongue Assembly BreakdownEngine Operating InstructionsEngine OIL Recommendations Kohler SH265 Maintenance OperationTowing Log Splitter Accessories Important Notice Warranty Repair and ServiceSpecifications

S402022H0/S402022K0 specifications

Oregon S402022H0 and S402022K0 are two advanced weather stations designed for both hobbyist meteorologists and professionals alike. These models are part of Oregon Scientific’s commitment to providing high-quality, reliable weather monitoring solutions that cater to a wide range of users.

One of the main features of the S402022H0 and S402022K0 is their ability to deliver accurate real-time weather data. Equipped with high-precision sensors, these devices can measure temperature, humidity, atmospheric pressure, wind speed, and rainfall. This comprehensive data collection allows users to gain insights into local weather patterns, essential for planning outdoor activities or managing agricultural practices.

Both models stand out due to their user-friendly interfaces, featuring clear LCD screens that display the weather data in an easily readable format. Additionally, these weather stations often come with wireless capabilities, allowing the sensors to communicate with the main unit without cumbersome wiring. This feature enhances the installation flexibility, as sensors can be placed in optimal locations without concern for running wires back to the display unit.

Another significant technological advancement in the Oregon S402022H0 and S402022K0 is support for connectivity with mobile devices. Users can often sync the data from these weather stations to smartphones or tablets via dedicated apps. This connectivity ensures that users can monitor weather conditions remotely, offering convenience and flexibility, especially for those on the go.

Moreover, these models typically offer robust data logging capabilities. Users can track historical weather data over time, enabling them to analyze trends and make informed decisions based on past weather patterns. This feature is particularly beneficial for researchers and professionals in agriculture, construction, and environmental sciences.

The S402022H0 and S402022K0 weather stations are also designed with durability in mind. Constructed to withstand various environmental conditions, these devices can function reliably in various climates, making them suitable for both indoor and outdoor use.

In summary, the Oregon S402022H0 and S402022K0 weather stations impress with their comprehensive feature set, technological advancements, and reliable performance. They are invaluable tools for anyone looking to enhance their understanding of their local weather conditions while enjoying the convenience of modern technology.
Top Page Image Contents