Oregon S402022H0/S402022K0 owner manual Operation of the LOG Splitter, General Repair

Page 6

OPERATION OF THE LOG SPLITTER

ONLY operate the log splitter from the operator zone as shown in the diagram. The operator has the safest and most efficient access to the control valve and the beam in this location. Operating the log splitter in another location can result in serious injury or death.

TOP VIEW

OPERATOR

ZONE

ALWAYS block the wheels to prevent movement of the log splitter while in operation.

KNOW how to stop the log splitter and disengage the controls before operating it.

NEVER place hands or feet between the log and splitting wedge during forward or reverse stroke as this could result in serious injury or death.

NEVER straddle or step over the log splitter during operation.

NEVER reach or bend over the log splitter to pick up a log.

NEVER try to split two logs on top of each other.

NEVER try to cross split a log.

NEVER attempt to load the log splitter when the ram or wedge is in motion.

NEVER use your foot, a rope or any extension device to operate the control lever on the valve. Only use hand.

NEVER move the log splitter while the engine is running. Shut off the engine if you are leaving the log splitter, even for a short period of time.

NEVER touch the muffler and other hot areas of the engine during operation. Wait until the engine cools down. ALWAYS be careful when moving or lifting the log splitter. Get assistance if it feels too heavy to move by yourself.

GENERAL REPAIR

NEVER operate your log splitter when it is in poor mechanical condition or in need of repair.

NEVER alter your log splitter in any manner. Such alterations may cause your log splitter to be unsafe and will void the warranty.

NEVER tamper with the engine to run it at excessive speeds. The maximum engine speed is preset by the manufacturer and is within safety limits. Refer to the engine owner’s manual for your particular log splitter.

Page 4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents VERTICAL/HORIZONTAL 22 TON LOG Splitter Table of Contents Safety Decals Intended USEPersonal Protective Equipment Location Hydraulic Tank Lower TANK, Right Corner General Safety Work AreaPreparation of the LOG Operation of the LOG Splitter General RepairMaintenance & Safety Fire PreventionTowing Safety Assembly Instructions Item no Decsription QTYItem no Description QTY Beam 3/4 R Clip Pin Tank/Tongue Assembly Pivot Pin Item no Descrption QTY Replacement Parts Wheel Assembly Breakdown Item NO. Part no Description QTYBeam Assembly Breakdown Item no Description QTYTongue Assembly Breakdown Item no DescriptionOperating Instructions EngineEngine OIL Recommendations Kohler SH265 Maintenance OperationTowing Log Splitter Accessories Warranty Repair and Service Important NoticeSpecifications

S402022H0/S402022K0 specifications

Oregon S402022H0 and S402022K0 are two advanced weather stations designed for both hobbyist meteorologists and professionals alike. These models are part of Oregon Scientific’s commitment to providing high-quality, reliable weather monitoring solutions that cater to a wide range of users.

One of the main features of the S402022H0 and S402022K0 is their ability to deliver accurate real-time weather data. Equipped with high-precision sensors, these devices can measure temperature, humidity, atmospheric pressure, wind speed, and rainfall. This comprehensive data collection allows users to gain insights into local weather patterns, essential for planning outdoor activities or managing agricultural practices.

Both models stand out due to their user-friendly interfaces, featuring clear LCD screens that display the weather data in an easily readable format. Additionally, these weather stations often come with wireless capabilities, allowing the sensors to communicate with the main unit without cumbersome wiring. This feature enhances the installation flexibility, as sensors can be placed in optimal locations without concern for running wires back to the display unit.

Another significant technological advancement in the Oregon S402022H0 and S402022K0 is support for connectivity with mobile devices. Users can often sync the data from these weather stations to smartphones or tablets via dedicated apps. This connectivity ensures that users can monitor weather conditions remotely, offering convenience and flexibility, especially for those on the go.

Moreover, these models typically offer robust data logging capabilities. Users can track historical weather data over time, enabling them to analyze trends and make informed decisions based on past weather patterns. This feature is particularly beneficial for researchers and professionals in agriculture, construction, and environmental sciences.

The S402022H0 and S402022K0 weather stations are also designed with durability in mind. Constructed to withstand various environmental conditions, these devices can function reliably in various climates, making them suitable for both indoor and outdoor use.

In summary, the Oregon S402022H0 and S402022K0 weather stations impress with their comprehensive feature set, technological advancements, and reliable performance. They are invaluable tools for anyone looking to enhance their understanding of their local weather conditions while enjoying the convenience of modern technology.
Top Page Image Contents