Oregon S402022H0/S402022K0 owner manual General Safety, Work Area, Preparation of the LOG

Page 5

GENERAL SAFETY

ALWAYS keep the operator’s manual nearby for reference. Reread the manual periodically.

ALWAYS establish a safety zone restricting bystanders to a 10 foot radius around the log splitter when log splitter is in operation.

ALWAYS ensure that all operators are properly trained or have read and understood the operator’s manual. ALWAYS operate the log splitter with a clear mind, free of the influence of alcohol, drugs or medication. ALWAYS wear close fitted clothing, free from lanyards, strings or jewelry which could be an entrapment hazard. ALWAYS keep clothing and hair away from moving parts..

ALWAYS kep safety shields in place during operation.

WORK AREA

ALWAYS operate this log splitter on firm ground/earth.

ALWAYS wear proper footwear with adequate traction.

ALWAYS operate your log splitter in an open area. (Exhaust fumes contain carbon monoxide which can be deadly when inhaled.)

ALWAYS operate your log splitter on level ground. (Operating on a slope couyld cause the log splitter to roll over or logs to fall off.)

ALWAYS operate your log splitter in daylight or under good artificial light.

ALWAYS keep the work area clean. Remove split wood around the log splitter immediately so that you don’t stumble over it.

PREPARATION OF THE LOG

Both ends of the log should be cut as square as possible to help prevent the log from riding out of the splitter during operation. Do not split logs greater than 26 inches in length.

Page 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents VERTICAL/HORIZONTAL 22 TON LOG Splitter Table of Contents Personal Protective Equipment Safety DecalsIntended USE Location Hydraulic Tank Lower TANK, Right Corner Preparation of the LOG General SafetyWork Area General Repair Operation of the LOG SplitterFire Prevention Maintenance & SafetyTowing Safety Item no Description QTY Assembly InstructionsItem no Decsription QTY Beam 3/4 R Clip Pin Tank/Tongue Assembly Pivot Pin Item no Descrption QTY Wheel Assembly Breakdown Item NO. Part no Description QTY Replacement PartsItem no Description QTY Beam Assembly BreakdownItem no Description Tongue Assembly BreakdownEngine Operating InstructionsEngine OIL Recommendations Kohler SH265 Towing MaintenanceOperation Log Splitter Accessories Important Notice Warranty Repair and ServiceSpecifications

S402022H0/S402022K0 specifications

Oregon S402022H0 and S402022K0 are two advanced weather stations designed for both hobbyist meteorologists and professionals alike. These models are part of Oregon Scientific’s commitment to providing high-quality, reliable weather monitoring solutions that cater to a wide range of users.

One of the main features of the S402022H0 and S402022K0 is their ability to deliver accurate real-time weather data. Equipped with high-precision sensors, these devices can measure temperature, humidity, atmospheric pressure, wind speed, and rainfall. This comprehensive data collection allows users to gain insights into local weather patterns, essential for planning outdoor activities or managing agricultural practices.

Both models stand out due to their user-friendly interfaces, featuring clear LCD screens that display the weather data in an easily readable format. Additionally, these weather stations often come with wireless capabilities, allowing the sensors to communicate with the main unit without cumbersome wiring. This feature enhances the installation flexibility, as sensors can be placed in optimal locations without concern for running wires back to the display unit.

Another significant technological advancement in the Oregon S402022H0 and S402022K0 is support for connectivity with mobile devices. Users can often sync the data from these weather stations to smartphones or tablets via dedicated apps. This connectivity ensures that users can monitor weather conditions remotely, offering convenience and flexibility, especially for those on the go.

Moreover, these models typically offer robust data logging capabilities. Users can track historical weather data over time, enabling them to analyze trends and make informed decisions based on past weather patterns. This feature is particularly beneficial for researchers and professionals in agriculture, construction, and environmental sciences.

The S402022H0 and S402022K0 weather stations are also designed with durability in mind. Constructed to withstand various environmental conditions, these devices can function reliably in various climates, making them suitable for both indoor and outdoor use.

In summary, the Oregon S402022H0 and S402022K0 weather stations impress with their comprehensive feature set, technological advancements, and reliable performance. They are invaluable tools for anyone looking to enhance their understanding of their local weather conditions while enjoying the convenience of modern technology.
Top Page Image Contents