Scag Power Equipment MAG Tractor Contd, Cutter Deck, Hydraulic System, Weights and Dimensions

Section 3

3.3 TRACTOR (CONT'D)

Seat	Milsco Seat With Adjustment Lever For Forward and Back
	Movement
Travel Speed:
Forward	0 - 8 MPH Infinitely Variable
Reverse	0 - 4.3 MPH Infinitely Variable

3.4 CUTTER DECK

No. of Blades	3
Width of Cut:
Mag-61	61 in.
Mag-72	72 in.
Blade Size:
Mag-61	1/4 thick x 21" long, milled edge, 5150 alloy steel
Mag-72	1/4 thick x 24-1/2" long, milled edge, 5150 alloy steel
Blade Spindles	Cast Iron with Easy Removable Taper Hubs
Deck Drive	Belt Driven Electric Clutch Connected to Drive Shaft to
	Gearbox on Deck
Electric Clutch Type	Warner “Mag Stop” Electric Clutch
Blade Brake	Lever Controlled Linkage to Band Type Brake. Brake Hub
	Connected to Drive Shaft
Cutting Height	Switch on Instrument Panel Controls Electric Actuator;
	Cutting Heights - 1-1/2" to 5-1/2"
Deck Tilt	Switch on Instrument Panel Controls Electric Actuator
Cutter Deck Belts:
Blade and Gearbox Drive (Mag-61)	Scag Part Number - 48204
Blade and Gearbox Drive (Mag-72)	Scag Part Number - 48089
Blade Drive (Mag-61)	Scag Part Number - 48265
Blade Drive (Mag-72)	Scag Part Number - 481295
Gearbox Type	Sealed Housing, Bevel Gear and Pinion Type
Drive Shaft	Quick-Disconnect Shaft With Two High Speed U-Joints

3.5 HYDRAULIC SYSTEM

Hydraulic Pump	Sunstrand Series 15
Hydraulic Cooler	Part of Radiator
Hydraulic Oil Filter	10 Micron Spin-on Element Type
Hydraulic Reservoir	High Density Polyethylene; 13 Quart Capacity

3.6 WEIGHTS AND DIMENSIONS

Length:
Mag-61	120.0"
Mag-72	120.0"
Tracking Width:
Mag-61	54.0"
Mag-72	54.0"
Overall Width:
Mag-61	73.0"
Mag-72	84.0"
Overall Width (with Discharge Chute Up):
Mag-61	62.0"
Mag-72	73.0"
Overall Height	51.0"
Operating Weight:
Mag-61	1,750 lb.
Mag-72	1,800 lb.
	7