Wiring the System

TURN OFF ALL POWER...

IMPORTANT!

Figure 6. Compositions Overture OVTR 1 speakers feature gold-plated terminals that can be connected in several different ways, e.g., spade terminals, and direct wiring (as shown here).

After placing the speakers, you are ready to connect your system. First turn off all audio system power. Use high-quality speaker wire to make your connections. For speaker connections, use #18 gauge speaker wire (or #16 for runs over 25 feet) with polarity coding. The side of the wire with a ridge or other coding is usually considered negative polarity (i.e., – ). Also, consult the owner’s manuals that were included with your amplifier, receiver, or television to confirm connection procedures.

If your system includes a Dolby ® Surround Pro Logic® or AC-3 ® preamplifier or A/V receiver, set the center-channel mode to NORMAL. This will route the low frequencies (below 100Hz) away from the center-channel speaker to the front left and right speakers.

Observe polarities when making speaker connections, as shown in Figures 6 and 7 below. Connect each + terminal on the back of the amplifier, receiver, or television to the respective

+ (red) terminal on each OVTR 1 speaker. Similarly, connect the (black) terminals in the same way.

Do not reverse polarities (i.e., + to - or - to +) when making connections. Doing so will cause poor imaging and diminished bass response.

OVTR 1

(rear view)

Red = +

		MAX
BASS			Black = –
		MIN	Black = –
	–
INPUT	8 Ω
	+
ON / STANDBY
1.6A 250V	FUSE
150W	-230V
MAX	50Hz
	ATTENTION:	CAUTION:

CONNECTING SPEAKERS DIRECTLY TO WIRES

Figure 7. Wiring diagram shows polarity connections for one channel of a stereo or home theater system.

Receiver or

Amplifier

(rear view)

–

(one channel shown)

OVTR 1

(rear view)

blk – + red

MAX	MIN			CAUTION:
	8 Ω	ON /		-230V 50Hz ATTENTION:
BASS	8 Ω	STANDBY	FUSE	-230V 50Hz ATTENTION:
BASS	INPUT		1.6A 250V	150W MAX

Compositions Overture OVTR 1 – Owner’s Manual ◆ 6

OVTR 1 specifications

Infinity OVTR 1 is a cutting-edge electric vehicle that represents a significant advancement in sustainable automotive technology. Designed with the modern driver in mind, this vehicle seamlessly combines performance, efficiency, and comfort, making it an attractive choice for those looking to embrace the future of transportation.

One of the standout features of the Infinity OVTR 1 is its impressive electric powertrain. The vehicle is equipped with a high-capacity battery that provides an extensive driving range, allowing users to travel long distances without the need for frequent recharging. The advanced electric motors deliver instant torque, resulting in rapid acceleration and a thrilling driving experience. This powertrain not only maximizes performance but also minimizes environmental impact, aligning with the growing demand for eco-friendly vehicles.

The Infinity OVTR 1 incorporates cutting-edge technologies that enhance both safety and convenience. Its advanced driver-assistance systems include adaptive cruise control, lane-keeping assist, and automated emergency braking, all designed to provide a safer driving experience by minimizing the risk of accidents. The vehicle's intelligent navigation system offers real-time traffic updates and route optimization, ensuring drivers can travel efficiently and reach their destination on time.

The interior of the Infinity OVTR 1 is designed with a focus on comfort and usability. Premium materials and ergonomic seating create an inviting atmosphere, while the spacious cabin provides ample legroom for all passengers. The state-of-the-art infotainment system features a large touchscreen interface that integrates seamlessly with smartphones, providing access to navigation, music, and communication features, all at the driver’s fingertips.

Connectivity is a key characteristic of the Infinity OVTR 1, with built-in Wi-Fi capabilities allowing passengers to stay connected on the go. The vehicle is also compatible with various smart home devices, enabling users to control their home environment directly from the car. Additionally, the vehicle supports over-the-air software updates, ensuring it remains at the forefront of technology and performance enhancements throughout its lifespan.

In summary, the Infinity OVTR 1 is a remarkable electric vehicle that blends sustainable technology with luxurious features. With its impressive driving range, advanced safety systems, high-tech connectivity options, and comfortable interior, it stands out as a premier choice for environmentally conscious drivers seeking both performance and sophistication in their automotive experience. As automotive technologies continue to evolve, the Infinity OVTR 1 exemplifies the potential of electric vehicles in transforming how we think about transportation.