Operating the System Cont ’D, Replacing the Fuse

JUDGING BASS LEVEL...

IMPORTANT!

Figure 9. The OVTR 1’s fuse is located on the rear panel next to the AC power cord.

OPERATING THE SYSTEM (CONT ’D)

3.Listen to a variety of music selections and note the bass level. If you feel there is too much bass, you can reduce it by adjusting the BASS control from the “normal” center-detent position towards the MIN setting (see Figure 8 on previous page). Conversely, if you want more bass output, rotate the level control towards the MAX setting.

NOTE: The amount of bass you hear will be affected by a number of different factors, including the room’s size and shape, the construction materials used to build the room, the listener’s position relative to the speakers, and the position of the speakers in the room. If there is too much bass, move the speakers away from nearby walls. Conversely, if you want more bass, place the speakers closer to the walls (also see Figure 1 on page 3).

4.For safety reasons, the side grille is bonded in place. Please do not attempt to remove. Potential shock hazard.

REPLACING THE FUSE

Compositions Overture OVTR 1 speakers each use a built-in fuse to protect the subwoofer amplifier. To replace a fuse with a new one (see enclosed spare), perform the following procedure:

1.Switch off the speaker and unplug the power cord. Then turn the speaker around to access the fuse holder on the rear panel (refer to Figure 9 below).

2.Using a small flat-blade screwdriver, place the tip in the indent and turn the fuse cap counterclockwise.

3.Remove the old fuse and replace it with a new one having the same value and rating, a 2AG 3A SB 250V fuse.

Do not substitute the blown fuse with another fuse value or rating. Doing so will void the warranty.

4.Insert the cap holding the new fuse into the holder and turn clockwise to lock it.

5.Rotate the speaker to its original position. Then plug the speaker’s AC power cord back into the nearest AC outlet.

OVTR 1

(rear view)

								U S
							F			E
MAX	MIN					CAUTION:	E			U	F
						FOR CONTINUED PROTECTION	E		S		F
						AGAINST RISK OF FIRE, REPLACE
						ONLY WITH SAME TYPE OF FUSE:
						2AG SB 250V
	–	8 Ω +	ON /	FUSE	-230V 50Hz	ATTENTION:
	BASS	INPUT	STANDBY	FUSE	-230V 50Hz	UTILSER UN FUSIBLE DE RECHANGE
		INPUT		1.6A 250V	150W MAX	DE MEME TYPE ET CALIBRE

FUSE T 1.6A 250V

OVTR 1 FUSE

Compositions Overture OVTR 1 – Owner’s Manual ◆ 8

OVTR 1 specifications

Infinity OVTR 1 is a cutting-edge electric vehicle that represents a significant advancement in sustainable automotive technology. Designed with the modern driver in mind, this vehicle seamlessly combines performance, efficiency, and comfort, making it an attractive choice for those looking to embrace the future of transportation.

One of the standout features of the Infinity OVTR 1 is its impressive electric powertrain. The vehicle is equipped with a high-capacity battery that provides an extensive driving range, allowing users to travel long distances without the need for frequent recharging. The advanced electric motors deliver instant torque, resulting in rapid acceleration and a thrilling driving experience. This powertrain not only maximizes performance but also minimizes environmental impact, aligning with the growing demand for eco-friendly vehicles.

The Infinity OVTR 1 incorporates cutting-edge technologies that enhance both safety and convenience. Its advanced driver-assistance systems include adaptive cruise control, lane-keeping assist, and automated emergency braking, all designed to provide a safer driving experience by minimizing the risk of accidents. The vehicle's intelligent navigation system offers real-time traffic updates and route optimization, ensuring drivers can travel efficiently and reach their destination on time.

The interior of the Infinity OVTR 1 is designed with a focus on comfort and usability. Premium materials and ergonomic seating create an inviting atmosphere, while the spacious cabin provides ample legroom for all passengers. The state-of-the-art infotainment system features a large touchscreen interface that integrates seamlessly with smartphones, providing access to navigation, music, and communication features, all at the driver’s fingertips.

Connectivity is a key characteristic of the Infinity OVTR 1, with built-in Wi-Fi capabilities allowing passengers to stay connected on the go. The vehicle is also compatible with various smart home devices, enabling users to control their home environment directly from the car. Additionally, the vehicle supports over-the-air software updates, ensuring it remains at the forefront of technology and performance enhancements throughout its lifespan.

In summary, the Infinity OVTR 1 is a remarkable electric vehicle that blends sustainable technology with luxurious features. With its impressive driving range, advanced safety systems, high-tech connectivity options, and comfortable interior, it stands out as a premier choice for environmentally conscious drivers seeking both performance and sophistication in their automotive experience. As automotive technologies continue to evolve, the Infinity OVTR 1 exemplifies the potential of electric vehicles in transforming how we think about transportation.