Scag Power Equipment STT61V-31KB-DF manual Roll-over protection system

Page 10

R

Section 2

22.Use care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

23.NEVER leave the machine running unattended.

2.5 Roll-over protection system

WARNING

Keep the roll bar in the raised and locked position and the seat belt securely fastened during operation. Failure to do so could cause serious injury or loss of life.

This mower has been designed for good traction and stability under normal mowing conditions. However, caution must be used when traveling on slopes, especially when the grass is wet. Do not mow on wet grass. Wet grass reduces traction and steering control.

Any or all parts of the Roll-Over Protection System MUST NOT be removed. Failure to adhere to this guideline could result in injury or death.

Lower the roll bar only when absolutely necessary.

1.To lower the roll bar, remove the hairpin cotter pins and remove the two (2) lock pins. See Figure 2-2.

2.Lower the roll bar to the down position.

3.To raise the roll bar, lift the bar to the upright position.

4.Install the two (2) lock pins through the hole, secure with the two (2) hairpin cotter pins. See Figure 2-2.

UPRIGHT AND

LOCKED POSITION

WARNING

There is no roll-over protection when the roll bar is in the down position.

Lower the roll bar only when absolutely necessary.

Raise the roll bar as soon as clearance permits.

DO NOT wear the seat belt when the roll bar is in the down position.

ALWAYS wear seat belt when roll bar is in the up position.

Operate the machine smoothly, no sudden turns, starts or stops.

Check the area carefully before mowing for proper overhead clearance (i.e. branches, doorways, etc.).

DO NOT contact any overhead object with the roll bar.

Figure 2-1. Foldable Roll-Over Protection System

HAIR PIN

LOCK PIN

Figure 2-2. ROPS Hinge

The potential exposure of the seat belt to severe environmental conditions make it crucial to inspect the seat belt system regularly.

It is recommended that the seat belt be inspected on a daily basis for signs of damage. Any seat belt system that shows cuts, fraying, extreme or unusual wear, significant discoloration due to UV exposure, dirt or stiffness, abrasion to the seat belt webbing, or damage to the buckle, latch plate, hardware or any other obvious problem should be replaced immediately.

6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator Table of Contents Troubleshooting Cutting Conditions Adjustments Following SectionDirection Reference General InformationIntroduction Servicing The Engine And Drive Train ComponentsSymbols Symbol DescriptionSignal Words Safety InformationBefore Operation considerations Know the function of all controls and how to stop quickly Operation ConsiderationsSection Roll-over protection system Foldable Roll-Over Protection SystemSeat Belt Inspection Using a spark arrestor Maintenance Considerations & storageSPARK Ignition System Install Belt COvER Before Forward R F REvERSEEngine SpecificationsPower Head ElectricalHydraulic System Weights And DimensionsCutter Deck ProductivityOperating Instructions Controls And Instrument IdentificationSafety Interlock System Dump Valve ControlGround Travel And Steering Initial Run-In ProceduresStarting The Engine Forward TravelEngaging The Deck Drive Cutter Blades Reverse TravelParking The Mower Rotating BladesHillside Operation After OperationMoving Mower With Engine Stopped Adjusting Cutting HeightRecommendations For Mowing Adjusting The Steering Levers Adjusting The Height Adjust PedalTowing Optional Hitch Accessory Troubleshooting Cutting Conditions Condition Cause CureTroubleshooting Cutting Conditions Contd Cut, or Rough ContourScalping Blades Hitting Adjustments Parking Brake AdjustmentTravel Adjustments Neutral AdjustmentThrottle Control and Choke Adjustments Tracking AdjustmentCutter Deck Level Cutter Deck PitchCutter Deck Height Adjustment Cutter Deck HeightCustom-Cut Baffle Adjustment Custom-Cut Baffle AdjustmentElectric clutch adjustment 10. Clutch Air Gap AdjustmentMaintenance Maintenance Chart Recommended Service IntervalsMaintenance Chart Recommended Service Intervals Contd LubricationLubrication Fitting Points Checking Hydraulic Oil Level Changing Hydraulic OilEngine Oil Engine Fuel SystemReplacing In-Line Fuel Filter Elements Lpg fUel systemBattery Engine Air CleanerCleaning and/or Replacing Air Cleaner Element Drive Belts Cutter BladesBlade Replacement Blade SharpeningCutter Deck Gearbox TiresCooling System Body, Deck, And Upholstery Cleaning the Radiator Debris ScreenChecking The Fan Belt Tension Liquid- Cooled Engines Only Illustrated Parts List Scag Approved Attachments and AccessoriesSection 61V Cutter Deck Section 61V Cutter Deck Cutter Deck Controls Description Sheet Metal Components Sheet Metal Components STT ROLL-OVER Protection System STT ROLL-OVER Protection System STT Suspension Seat Section Deck Drive Components Bolt, Hex Head 5/16-18 x 1-3/4 Grd Engine & Attaching Parts Kubota Dual Fuel Available through the individual engine manufacturer Brake and Steering Components Brake and Steering Components Hydraulic System Kubota Dual Fuel Hydraulic System Kubota Dual Fuel STT-DF Gasoline System STT-DF Gasoline System STT-DF LP System Regulator, Kubota Section BDP-16A Hydraulic Pump Assembly with Cooling Fan Hex Screw, Flanged Head M10 x 1.50-65mm Electrical System Kubota Dual Fuel Fuel Pump Replacement Decals and Information Plates Heavy-Duty CommercialDUAL-FUEL Electrical Schematic Kubota Dual Fuel Limited Warranty Commercial Equipment

STT61V-31KB-DF specifications

The Scag Power Equipment STT61V-31KB-DF is a remarkable addition to the lineup of professional-grade mowers, tailored for those who require unmatched performance and durability. This zero-turn mower is designed with landscapers and lawn care professionals in mind, featuring cutting-edge technology and robust characteristics that elevate its functionality in various environments.

At the heart of the STT61V-31KB-DF is a powerful 31-horsepower Kawasaki engine. Renowned for its reliability and efficiency, this engine provides ample power, ensuring that even the most demanding tasks can be tackled with ease. This mower employs a dual-fuel capability, enabling operators to switch between gasoline and propane, thereby enhancing versatility and fuel consumption efficiency. This feature is particularly favorable for those looking to manage costs while maintaining high productivity.

One of the standout characteristics of the STT61V-31KB-DF is its 61-inch Velocity Plus cutting deck. The design of this deck allows for superior airflow, resulting in a clean cut even in tall grass. The adjustable cutting height ranges from 1 to 5 inches, giving users the flexibility to achieve the desired look for any lawn. The reinforced edges and heavy-duty construction ensure durability, enabling the mower to withstand the rigors of frequent use.

Another highlight is the innovative suspension system, which contributes to a smooth ride over uneven terrain. The adjustable anti-scalp rollers prevent lawn damage, ensuring that the mower glides effortlessly, maintaining high-quality cutting results. The ergonomic design of the operator controls allows users to navigate with ease, enhancing overall comfort during extended mowing sessions.

The machine is equipped with professional-grade wheels and a heavy-duty frame, providing stability and traction on various surfaces. Additionally, the intuitive dashboard incorporates easy-to-read gauges and controls, enabling operators to monitor performance and adjust settings instantly.

The Scag Power Equipment STT61V-31KB-DF exemplifies robust engineering, with a focus on performance, comfort, and durability. For those in the landscaping business or serious lawn enthusiasts, this mower stands out as a reliable companion that facilitates efficient and effective lawn care operations, making it a worthy investment.
Top Page Image Contents