Remington 117535-01A owner manual Servicing Pole Trimmer, Blade Replacement

Page 9

OWNER’S MANUAL

SERVICING POLE TRIMMER

The Pole Trimmer is a double-insulated tool and contains some parts that can only be replaced with original parts by an Autho-

rized Service Center. Visit our Technical Service web site at www.desatech.com

or contact ourTechnical Service Department at 1-800-858-8501 (English Only) for the nearest Authorized Service Center.

The parts listed on pages 12 and 13 are considered to be user replaceable. See Re- placement Parts and Accessories, page 10, for information on ordering these parts.

BLADE REPLACEMENT

WARNING:Topreventserious personalinjury,weargloveswhen removing and installing the cut- ter blades. Do not place fingers or hands between blades where they could get cut.

1.Unplug pole trimmer from power supply.

2.Place pole trimmer upside down on workbench and remove the four (4) bottom cover screws. Lift bottom cover off (see Figure 18).

Cover Screw

Bottom Cover

3.Remove M5 locknut and washer from cam (see Figure 19).

4.Align cam and cutter blade assemby. Remove cam. (see Figure 19).

M5 Locknut

Washer

Cam

Cutter Blade Assembly

Figure 19 - Removing Cam

5.Remove screw that holds down cutter blade assembly (see Figure 20). IM- PORTANT: Be sure not to loose the 8-32 locknut that secures this screw.

Screw

Cutter Blade

Assembly

Cam Flange

8-32 Locknut

Figure 20 - Removing Cutter Blade Assembly

6.Remove and dispose of cutter blade assembly.

7.Attach new cutter blade assembly to power head with screw and locknut removed in step 5.

8.Align cutter blade assembly so that the cam will fit properly into the oval- shaped lobes of the cutter blade assem- bly (see Figure 19). IMPORTANT: The large diameter flange of the cam must face upward away from the power head. The small diameter flange of the cam must line up with and sit directly on top of the cam flange.

9.Replace washer and locknut removed in step 3. Tighten securely.

10.Replace the bottom cover and se- cure with the 4 bottom cover screws removed in step 2 (see Figure 18). Tighten screws securely.

WARNING: All components must be installed and securely fastenedbeforepluggingpoletrim- mer into power supply. Failure to do so may cause product damage or serious personal injury.

Note: If binding occurs after reassembly, repeat all of the previous steps making sure that cam aligns properly with cutter blade assembly.

Figure 18 - Removing Bottom Cover from Trimmer Head

110939

9

For more information, visit www.desatech.com

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Axcess Trimmer Safety Before Operating Pole TrimmerWhile Operating Pole Trimmer Maintenance Storage of Pole Trimmer UnpackingProduct Identification Connecting Extension Cord Pivoting the Power HeadOperating Pole Trimmer Extension CordsUnlocking the Trigger to Start the Pole Trimmer Starting the Pole TrimmerAdjusting Pole Length Using the Pole TrimmerOperating Positions Trimming Bottoms and Sides Hedges and Shrubs Trimming a HedgeTroubleshooting Cleaning and MaintenanceServicing Pole Trimmer Blade ReplacementTechnical Service Replacement Parts and AccessoriesRepair Service Warranty ServiceParts Central Pole Trimmer Model 117535-01A Illustrated Parts BreakdownPole Trimmer Parts ListIndustries of Canada, Inc Electric Pole Trimmer Limited WarrantyManual DEL Propietario Advertencias DE Seguridad Antes DE Operar LA Podadora DE PértigaMientras Opere LA Podadora DE Pértiga Mantenimiento Y Almacenaje DE LA Podadora DE Pértiga DesempaqueMantenga la podadora de pértiga con esmero Revise las piezas dañadasIdentificación DEL Producto Operación DE LA PodadoraGiro DE LA Cabeza DE Potencia Cordones DE Extensión Conexión DEL Cordón DE ExtensiónLongitud Del cordónDesbloqueo del gatillo para arrancar la podadora de pértiga Arranque DE LA Podadora DE PèrtigaRegulación DE LA Longitud DE LA Pértiga Posiciones DE OperaciónUSO DE LA Podadora DE Pértiga No trate de cortar ramas de más de 3/4 pulgadas de diámetro Podado DE UN SetoAnálisis DE Averías Limpieza Y MantenimientoReemplazo DE LA Cuchilla Servicio a LA Podadora DE PértigaServicio Técnico Accesorios Piezas DE RepuestoServicio DE Reparación Servicio CON GarantíaPodadora DE Pértiga Modelo 117535-01A Desarme Ilustrado DE LAS PiezasPodadora Eléctrica DE Piezas Lista DE PiezasLa Ports Central DE PiezasGarantía Limitada DE LA Podadora Eléctrica DE Pértiga Guide DU Propriétaire Consignes DE Sécurité Avant D’UTILISER LE TAILLE-HAIE À PercheUtilisation DU TAILLE-HAIE À Perche Entretien ET Entreposage DU TAILLE-HAIE À Perche DéballagePrenez bien soin du taille-haie à perche Recherchez les pièces endomma- géesIdentification DU Produit Utilisation DU TAILLE-HAIEPour Faire Pivoter LE Moteur Raccordement DE LA Rallonge Électrique Rallonge ÉlectriqueLongueur de Pieds 18 AWG 16 AWG 14 AWGVerrouillage du taille-haie en position « Marche » Démarrage DU TAILLE-HAIE À PerchePositions DE Fonctionnement Réglage DE LA Longueur DE LA PercheUtilisation DU TAILLE-HAIE Vous pencher ni à vous accroupirTaille d’une haie Taille D’UNE HaieDépannage Nettoyage ET EntretienLe moteur ne fonctionne pas lorsque vous Repoussez le bouton de verrouillageEntretien DU TAILLE-HAIE À Perche Remplacement DES LamesService Technique Pièces DE Rechange ET AccessoiresService DE Réparation Service Sous GarantieDépôt DE Pièces TAILLE-HAIE À Perche Modèle 117535-01A Liste Illustrée DES PiècesTAILLE-HAIE À Perche Liste DE PiècesGarantie Limitée DU TAILLE-HAIE Électrique À Perche
Top Page Image Contents