Remington Power Tools 111174-01, 107625-02 Operating Chain SAW, Filling OIL Tank, Oiling Chain

Page 11

OPERATING CHAIN SAW

WARNING: Read and understand this owner’smanualbeforeoperatingthissaw. Make certain you read and understand all Important Safety Information. Improper use of this chain saw can cause severe injury or death from fire, electrical shock, or body contact with moving chain, or falling wood.

FILLING OIL TANK

1.Remove oil cap.

2.Fill oil tank with SAE #30 motor oil. Note: For temperatures below 30°F, use SAE #10 oil. For temperatures above 75°F, use SAE #40 oil.

3.Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil seepage from tank.

4.Wipe off excess oil.

Note: It is normal for oil to seep when saw is not in use. Empty oil tank after each use to prevent seep- age.

IMPORTANT: DO NOT USE BAR AND CHAIN OIL

OILING CHAIN

Manual Oil System

Always check oil level before using saw. Do not attempt to operate the oil system while saw is in operation. To oil chain, press squeeze bulb. Oil will feed onto the guide bar and chain. Press squeeze bulb at least once before each cut. Check oil level often by looking at oil sight window (see Figure 7).

Oil Squeeze Bulb

Oil Sight Window

Figure 7 - Oil Squeeze Bulb and Oil Sight Window Location for Model 107624-02

Automatic Oil System

Chain saw Model 107625-02, 111174-01 is equipped with an automatic oiling system. It will provide ad- equate lubrication to the guide bar and saw chain. Check oil level every 15 minutes of cutting time. Oil level can be seen in oil sight window (see Figure 8).

Figure 8 - Oil Sight Window Location for Model

ENGLISH

Oil Sight Window

 

107625-02, 111174-01

 

EXTENSION CORDS

Use proper extension cords with this saw. Use only extension cords marked for outdoor use. The cord must be marked with suffix W or W-A following the cord type designation. Example: SJTW-A or SJTW.

Use proper sized cord with this saw. Cord must be heavy enough to carry current needed. An undersized cord will cause voltage drop at saw. Saw will lose power and over- heat. Follow cord size requirements listed below.

Cord Length

AWG Cord Size

 

 

25 feet

16 AWG

50 feet

16 AWG

100 feet

14 AWG

150 feet

12 AWG

Keep cord away from cutting area. Make sure cord does not catch on branches or logs during cutting. Inspect cords often. Replace damaged cords.

This chain saw is designed with an extension cord hitch that prevents the extension cord from being pulled loose during use. To use, form a loop with the end of the extension cord, insert loop into slot in rear of handle, and place loop over cord hitch (see Figure 9). Gently pull loop against cord hitch until slack is removed. Plug extension cord into chain saw cord.

Power Cord

Cord Hitch

Extension Cord

Figure 9 - Looping Extension Cord over Cord Hitch

11

www.remingtonpowertools.com

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Models EL-8 107624-02, 107625-02 Electric Chain SAWCall 1-800-626-2237 for Technical Assistance Stop Para ArrétContents While Operating SAW Important Safety InformationBefore Operating SAW Kickback Kickback Safety Devices On This SawUnpacking Saw Maintenance and Kickback SafetyMaintenance and Storage of Chain SAW Chain Saw Model Product IdentificationChain SAW Names and Terms Important Do not clamp chain saw in vise during assembly AssemblyLinks should not come out of guide To tension saw chain orTo tension saw chain Pull chain to check tension. GuideExtension Cords Operating Chain SAWFilling OIL Tank Oiling ChainBefore Felling a Tree Cutting with the Chain SAWFelling a Tree Cutting Down a Tree Felling Cut Felling Procedure Felling NotchEntire Length Of Log On Ground Limbing a TreeBucking a LOG Trimming a Tree Pruning Log Supported On One EndLog Supported On Both Ends Care of Guide BAR Cleaning and MaintenanceCleaning SAW Body Normal Guide Bar MaintenanceFiling Cutter Depth Gauges Cleaning MaintenanceItems Needed to Sharpen Chain Sharpening CuttersReplacement Chains Technical ServiceReplacement Parts and Accessories Repair ServiceObserved Fault Possible Cause Remedy TroubleshootingRemington Brand Electric Chain SAW Limited Warranties Warranty InformationEnglish Page MODELS/MODELOS/MODÈLES MODELS/MODELOS/MODÈLE Parts LIST/LISTA DE REPUESTOS/LISTE DES PiècesPage Renvoi Pièce DESCRIPTION/DESCRIPCIÓN/DESCRIPTION MODELS/MODELOS/MODÈLES 107625-01, 107625-02MTA Distributors Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE PiècesPage 122503-01 Rev. a 03/08

111174-01, 107624-02, 107625-02 specifications

Remington Power Tools has established a strong reputation for providing high-quality outdoor power equipment. Among its notable offerings are the models 107625-02, 107624-02, and 111174-01. Each of these tools is designed to deliver powerful performance, ergonomic design, and innovative technology to meet the diverse needs of homeowners and professional landscapers alike.

The Remington model 107625-02 is a robust gas-powered string trimmer, which stands out for its exceptional cutting capabilities. This trimmer features a 25cc two-cycle engine, providing ample power for tackling thick grass and overgrown weeds. One of the key benefits of this model is its QuickStart technology, which ensures easy starting with minimal effort. Its lightweight design and adjustable handle enhance maneuverability, making it easy to navigate tight spaces. The 107625-02 also includes a bump feed head, allowing users to quickly and efficiently extend the cutting line by simply tapping the head on the ground, a time-saving feature that many users appreciate.

The 107624-02 model is a versatile hedge trimmer that excels in both residential and commercial settings. Powered by a 22cc engine, this tool is engineered to tackle dense hedges and shrubs with precision. One of its standout features is the 24-inch dual-sided blade, designed to provide a clean and precise cut while minimizing the risk of blade binding. Its rotating handle offers enhanced comfort and control, allowing users to trim at various angles without straining their wrists. This hedge trimmer also incorporates anti-vibration technology, making it easier to handle during extended use and reducing operator fatigue.

Finally, the 111174-01 model is a powerful chainsaw that prioritizes both performance and safety. Equipped with a 12-amp electric motor, this chainsaw produces substantial cutting power for felling small to medium trees and performing routine maintenance tasks. It features an automatic oiling system that ensures the chain is consistently lubricated for optimal performance and longevity. The tool's safety features include a chain brake and a safety lock button to prevent accidental starts, making it suitable for both seasoned users and novices alike. Lightweight and easy to handle, the 111174-01 chainsaw is an excellent choice for those looking to maintain their property effortlessly.

Each of these Remington power tools is designed with an emphasis on efficiency, user-friendly features, and durability, making them ideal companions for any outdoor project. Whether you're landscaping your garden or managing a larger property, these tools provide the performance and reliability needed to get the job done right.
Top Page Image Contents