Remington Power Tools 111174-01, 107625-02 Cleaning Maintenance, Items Needed to Sharpen Chain

Page 17

CLEANING AND

MAINTENANCE

4. Hold file guide level. Make sure 30° mark on

Continued

file guide is parallel to center of guide bar (see

Items Needed to Sharpen Chain

Figure 20). This will insure that you file cutters

at 30° angle.

Purchase these items from your local dealer, hard-

5. File from inside towards outside of cutter until

ware store, or chain saw supplies outlet.

sharp. Only file in this one direction (see Figure

• 5/32" round file

20). Note: Two or three strokes with file should

• Depth gauge tool

sharpen cutter.

• File guide

6. After each cutter is sharpened, move chain for-

• Vise

ward to sharpen next cutter. File all cutters on

• Medium sized flat file

one side of chain.

Sharpening Cutters

7. Move to other side of chain and repeat process.

Use file guide for 30° filing.

Filing Cutter Depth Gauges

1. Adjust chain for proper tension (see Saw Chain

The cutter depth gauge clearance is reduced as cutters

Tension Adjustment).

are sharpened. After every second or third sharpen-

2. Clamp guide bar in vise to hold saw steady.

ing, reset cutter depth gauges.

Note: Do not clamp chain.

1. Place depth gauge tool (.025") firmly across top

3. Press 5/32" round file (attached to file guide)

of two cutters. Make sure depth gauge enters slot

into groove between top plate and depth gauge

in depth gauge tool (see Figure 22).

on chain. File guide should rest on both top plate

2. Use medium flat file. File depth gauge level with

and depth gauge (see Figure 20). Note: File at

depth gauge tool.

midpoint of guide bar.

3. Remove depth gauge tool. With flat file, round

 

 

Filing Direction

 

 

off front corner of cutter depth gauge (see Figure

 

 

 

 

 

 

23).

 

30° Guide Mark

File Guide

After several hand filings, have authorized service

 

 

center or sharpening service machine sharpen chain.

 

 

 

 

 

 

This will insure even filing.

ENGLISH

5/32" Round File

Note: This illustration shows file guide placement and filing direction for sharpening cutters on left side of chain.

Figure 20 - File and File Guide Placement On Chain

REPLACING SAW CHAIN

Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Replacement Parts and Accessories.

Flat File

Depth

Gauge

Depth Gauge Tool

Depth Gauge (left side of chain)

Groove

Top Plate (left side of chain)

Depth Gauge (right side of chain)

Groove

Top Plate (right side of chain)

Right Side of Chain

Depth Gauge Slot

Figure 22 - Depth Gauge Tool On Chain

Front Corner

.025"

.635 mm

Figure 21 - Chain Part Locations

Figure 23 - Round Off Front Corner Of Depth Gauge

17

www.remingtonpowertools.com

Image 17
Contents Models EL-8 107624-02, 107625-02 Electric Chain SAWCall 1-800-626-2237 for Technical Assistance Stop Para ArrétContents While Operating SAW Important Safety InformationBefore Operating SAW Kickback Kickback Safety Devices On This SawUnpacking Saw Maintenance and Kickback SafetyMaintenance and Storage of Chain SAW Chain Saw Model Product IdentificationChain SAW Names and Terms Important Do not clamp chain saw in vise during assembly AssemblyTo tension saw chain To tension saw chain orPull chain to check tension. Guide Links should not come out of guideFilling OIL Tank Operating Chain SAWOiling Chain Extension CordsBefore Felling a Tree Cutting with the Chain SAWFelling a Tree Cutting Down a Tree Felling Cut Felling Procedure Felling NotchEntire Length Of Log On Ground Limbing a TreeBucking a LOG Trimming a Tree Pruning Log Supported On One EndLog Supported On Both Ends Cleaning SAW Body Cleaning and MaintenanceNormal Guide Bar Maintenance Care of Guide BARItems Needed to Sharpen Chain Cleaning MaintenanceSharpening Cutters Filing Cutter Depth GaugesReplacement Parts and Accessories Technical ServiceRepair Service Replacement ChainsObserved Fault Possible Cause Remedy TroubleshootingRemington Brand Electric Chain SAW Limited Warranties Warranty InformationEnglish Page MODELS/MODELOS/MODÈLES MODELS/MODELOS/MODÈLE Parts LIST/LISTA DE REPUESTOS/LISTE DES PiècesPage Renvoi Pièce DESCRIPTION/DESCRIPCIÓN/DESCRIPTION MODELS/MODELOS/MODÈLES 107625-01, 107625-02MTA Distributors Parts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE PiècesPage 122503-01 Rev. a 03/08

111174-01, 107624-02, 107625-02 specifications

Remington Power Tools has established a strong reputation for providing high-quality outdoor power equipment. Among its notable offerings are the models 107625-02, 107624-02, and 111174-01. Each of these tools is designed to deliver powerful performance, ergonomic design, and innovative technology to meet the diverse needs of homeowners and professional landscapers alike.

The Remington model 107625-02 is a robust gas-powered string trimmer, which stands out for its exceptional cutting capabilities. This trimmer features a 25cc two-cycle engine, providing ample power for tackling thick grass and overgrown weeds. One of the key benefits of this model is its QuickStart technology, which ensures easy starting with minimal effort. Its lightweight design and adjustable handle enhance maneuverability, making it easy to navigate tight spaces. The 107625-02 also includes a bump feed head, allowing users to quickly and efficiently extend the cutting line by simply tapping the head on the ground, a time-saving feature that many users appreciate.

The 107624-02 model is a versatile hedge trimmer that excels in both residential and commercial settings. Powered by a 22cc engine, this tool is engineered to tackle dense hedges and shrubs with precision. One of its standout features is the 24-inch dual-sided blade, designed to provide a clean and precise cut while minimizing the risk of blade binding. Its rotating handle offers enhanced comfort and control, allowing users to trim at various angles without straining their wrists. This hedge trimmer also incorporates anti-vibration technology, making it easier to handle during extended use and reducing operator fatigue.

Finally, the 111174-01 model is a powerful chainsaw that prioritizes both performance and safety. Equipped with a 12-amp electric motor, this chainsaw produces substantial cutting power for felling small to medium trees and performing routine maintenance tasks. It features an automatic oiling system that ensures the chain is consistently lubricated for optimal performance and longevity. The tool's safety features include a chain brake and a safety lock button to prevent accidental starts, making it suitable for both seasoned users and novices alike. Lightweight and easy to handle, the 111174-01 chainsaw is an excellent choice for those looking to maintain their property effortlessly.

Each of these Remington power tools is designed with an emphasis on efficiency, user-friendly features, and durability, making them ideal companions for any outdoor project. Whether you're landscaping your garden or managing a larger property, these tools provide the performance and reliability needed to get the job done right.