Remington Power Tools 107624-02, 107625-02 Important Safety Information, Before Operating SAW

Page 4

IMPORTANT SAFETY INFORMATION

WARNING: When using an electric chain saw, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

READ ALL INSTRUCTIONS.

Make sure you read and understand all in- structionsinImportantSafetyInformation onpages3through5.Improperuseofthis chainsawcancausesevereinjuryordeath from fire, electrical shock, body contact with moving chain, or falling wood.

BEFORE OPERATING SAW

1.Read and understand this owner’s manual before operating chain saw.

2.Watch what you are doing. Use common sense. Do not operate saw when you are tired.

3.Use chain saw for cutting wood only. Do not use chain saw for purpose not intended. Do not use for cutting plastic, masonry, etc.

4.Only well-instructed adults should operate chain saw. Never allow children to operate chain saw.

5.Use only electrical voltage noted on model plate of chain saw.

6.Use only extension cords marked for outdoor use. See page 10 for extension cord requirements.

7.Do not operate chain saw

while under the influence of alcohol, medica- tion, or drugs

in rain or in damp or wet areas

where highly flammable liquids or gases are present

if saw is damaged, adjusted wrong, or not fully and securely assembled

if trigger does not turn saw on and off. Chain must stop moving when you release trigger. Have faulty switch replaced by authorized ser- vice center (see Technical Service, page 16).

while in a hurry

while in tree or on a ladder unless trained to do so

8.Wear snug-fitting clothes when operating chain saw. Do not wear loose clothing or jewelry. They can get caught in moving saw chain.

9.Wear the following safety gear when operating chain saw.

heavy-duty gloves (wear rubber gloves when working outdoors)

steel-toed safety footwear with non-skid soles

eye protection such as safety glasses, goggles, or face screen

safety hard hat

ear mufflers or ear plugs

hair covering to contain long hair

face or dust mask (if working in dusty areas)

10.Before cutting, always provide the following:

clear work area

secure footing

planned retreat path from falling tree

11.Inspect tree before cutting down. Make sure there are no dead limbs or branches that may fall on you.

12.To reduce the risk of electric shock, this saw has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet of your extension cord, reverse the plug. If it still does not fit, a polarized extension cord will be necessary. Do not change the plug in any way.

WHILE OPERATING SAW

1.Stay alert. Use common sense while operating chain saw.

2.Keep work area clean. Cluttered areas invite injuries.

3.Be aware of extension cord while operating chain saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times.

4.Keep children, animals, and bystanders away from chain saw and extension cord. Only chain saw user should be in work area.

5.Do not cut down a tree unless you are trained or have expert help.

6.If two or more persons perform bucking and fell- ing operations at the same time, provide plenty of distance between operations. Provide distance of at least twice the height of tree being felled.

7.Secure wood you are cutting by using clamps or chocks.

8.Grip chain saw firmly with both hands. Never operate chain saw with one hand. Never use hand guard as handle.

9.Keep finger off trigger until ready to make cut.

10.Before starting chain saw, make sure chain is not touching anything.

11.To guard against electrical shock, avoid body contact with grounded objects such as pipes, fences, and metal posts.

12.Keep all parts of body away from chain when saw is running.

13.Do not force chain saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended.

www.remingtonpowertools.com

4

Image 4
Contents Electric Chain SAW Models EL-8 107624-02, 107625-02Stop Para Arrét Call 1-800-626-2237 for Technical AssistanceContents Before Operating SAW Important Safety InformationWhile Operating SAW Kickback Safety Devices On This Saw KickbackMaintenance and Storage of Chain SAW Saw Maintenance and Kickback SafetyUnpacking Product Identification Chain Saw ModelChain SAW Names and Terms Assembly Important Do not clamp chain saw in vise during assemblyTo tension saw chain or To tension saw chainPull chain to check tension. Guide Links should not come out of guideOperating Chain SAW Filling OIL TankOiling Chain Extension CordsFelling a Tree Cutting Down a Tree Cutting with the Chain SAWBefore Felling a Tree Felling Procedure Felling Notch Felling CutBucking a LOG Limbing a TreeEntire Length Of Log On Ground Log Supported On Both Ends Log Supported On One EndTrimming a Tree Pruning Cleaning and Maintenance Cleaning SAW BodyNormal Guide Bar Maintenance Care of Guide BARCleaning Maintenance Items Needed to Sharpen ChainSharpening Cutters Filing Cutter Depth GaugesTechnical Service Replacement Parts and AccessoriesRepair Service Replacement ChainsTroubleshooting Observed Fault Possible Cause RemedyWarranty Information Remington Brand Electric Chain SAW Limited WarrantiesEnglish Page MODELS/MODELOS/MODÈLES Parts LIST/LISTA DE REPUESTOS/LISTE DES Pièces MODELS/MODELOS/MODÈLEPage MODELS/MODELOS/MODÈLES 107625-01, 107625-02 Renvoi Pièce DESCRIPTION/DESCRIPCIÓN/DESCRIPTIONParts CENTRAL/CENTRAL DE PIEZAS/DÉPÔT DE Pièces MTA DistributorsPage 122503-01 Rev. a 03/08

111174-01, 107624-02, 107625-02 specifications

Remington Power Tools has established a strong reputation for providing high-quality outdoor power equipment. Among its notable offerings are the models 107625-02, 107624-02, and 111174-01. Each of these tools is designed to deliver powerful performance, ergonomic design, and innovative technology to meet the diverse needs of homeowners and professional landscapers alike.

The Remington model 107625-02 is a robust gas-powered string trimmer, which stands out for its exceptional cutting capabilities. This trimmer features a 25cc two-cycle engine, providing ample power for tackling thick grass and overgrown weeds. One of the key benefits of this model is its QuickStart technology, which ensures easy starting with minimal effort. Its lightweight design and adjustable handle enhance maneuverability, making it easy to navigate tight spaces. The 107625-02 also includes a bump feed head, allowing users to quickly and efficiently extend the cutting line by simply tapping the head on the ground, a time-saving feature that many users appreciate.

The 107624-02 model is a versatile hedge trimmer that excels in both residential and commercial settings. Powered by a 22cc engine, this tool is engineered to tackle dense hedges and shrubs with precision. One of its standout features is the 24-inch dual-sided blade, designed to provide a clean and precise cut while minimizing the risk of blade binding. Its rotating handle offers enhanced comfort and control, allowing users to trim at various angles without straining their wrists. This hedge trimmer also incorporates anti-vibration technology, making it easier to handle during extended use and reducing operator fatigue.

Finally, the 111174-01 model is a powerful chainsaw that prioritizes both performance and safety. Equipped with a 12-amp electric motor, this chainsaw produces substantial cutting power for felling small to medium trees and performing routine maintenance tasks. It features an automatic oiling system that ensures the chain is consistently lubricated for optimal performance and longevity. The tool's safety features include a chain brake and a safety lock button to prevent accidental starts, making it suitable for both seasoned users and novices alike. Lightweight and easy to handle, the 111174-01 chainsaw is an excellent choice for those looking to maintain their property effortlessly.

Each of these Remington power tools is designed with an emphasis on efficiency, user-friendly features, and durability, making them ideal companions for any outdoor project. Whether you're landscaping your garden or managing a larger property, these tools provide the performance and reliability needed to get the job done right.