Radio Shack PRO-2045 owner manual Search Skip

Page 21

•Continue the search — press s or t.

•Hold the scanner on the fre- quency — press LIMIT or turn the rotary tuner either way one click. -h-appears.

Notes:

•You can press s or t during the hold to step through the fre- quencies toward the upper or lower limits.

•If you tune to a search skip fre- quency, the scanner displays L/O (see “Search Skip” on Page 21).

•During the direct search, you can change the modulation mode (NFM or AM). See “Changing the Modulation Mode” on Page 28.

Press LIMIT again or press and hold s or t for more than 1 second to resume the direct search.

Search Skip

You can skip specified frequencies during a limit or direct search. This lets you avoid frequencies that have data tones or are already stored in a chan- nel. You can program up to 50 fre- quencies for the scanner to skip.

Notes:

•If you program more than 50 skip frequencies, each new frequency replaces one you already stored.

•You can select the skipped fre- quency when the scanner is in the hold mode. The scanner displays L/O when you select a skipped frequency.

To skip a frequency, press S/S when the scanner stops on the frequency during a limit or direct search.

Follow these steps to see which skip frequencies you have stored.

1.During a limit or direct search, press REVIEW. The first skip fre- quency appears on the display.

2.Use s, t, or REVIEW to review the other skip frequencies.

To remove a skip frequency, select the skip frequency you want to clear by using s, t, or REVIEW, then press S/ S.

To clear all the skip frequencies at once, while searching for frequencies, press and hold S/S until the scanner beeps twice.

21

Image 21

Contents PRO-2045 Features Page Scanning Legally FCC NoticeContents Troubleshooting Care and Maintenance Specifications Using Standard AC Power Connecting PowerUsing Vehicle Battery Power PreparationConnecting AN Antenna Telescoping AntennaOptional Outdoor Antenna Using the Feet Resetting ScannerTesting Alert Reception Testing Alert OperationConnecting AN Earphone Testing the Weather AlertListening Safely Connecting AN Amplified Extension Speaker Installing AN Optional Ctcss Tone BoardTraffic Safety Ctcss Board Look AT the Keyboard Understanding Your ScannerPage Look AT the Display FREQ, CHAN, Lock shows the rotary tuner’s current settingUnderstanding CHANNEL-STORAGE Banks Monitor MemoriesChannel-Storage Banks Using the Rotary Control OperationStoring Frequencies Limit Search Searching for and Temporarily Storing Active FrequenciesDirect Search Search Skip Automatically Storing Frequencies Moving a Frequency from a Monitor Memory to Channel Listening to Monitor MemoriesScanning Channels Turning Channel-Storage Banks On and OffLocking Out Channels Manually Selecting a ChannelUsing the Weather Alert Standby Mode Scanning Weather BandWeather Alert Special Features DelayPriority Changing Search Speeds Using Programmable AttenuatorUsing Auto Sort Skipping Data SignalsTurning on or OFF the KEY Tone Transferring to an Empty Channel Transferring a Frequency to Another ChannelTransferring to a Channel that has a Stored Frequency Exchanging Frequencies Between Two Programmed ChannelsUsing the Count Feature Using CtcssCtcss Tone Frequencies Changing or Deleting a Ctcss Tone Frequency for a Channel Assigning a Ctcss Tone Frequency to a ChannelGeneral Guide to Scanning National Weather Service FrequenciesGuide to Frequencies Ham Radio FrequenciesBirdie Frequencies Typical Band Usage Guide to the Action BandsPrimary Usage Specified IntervalsBifc Band AllocationHigh Frequency HF 29 MHz-30 MHz AIR CSB Frequency ConversionTroubleshooting Care and Maintenance Specifications Dimensions /4 × 91/4 × 81/16 Inches HWD 82 × 235 × 205mm RadioShack