Icom IC-M501EURO instruction manual Using the optional mounting bracket

Page 24

7 CONNECTIONS AND MAINTENANCE

◊Using the optional mounting bracket

An optional MB-75 FLUSH MOUNT is available for mounting the transceiver to a ﬂat surface such as an instrument panel.

CAUTION: KEEP the transceiver and microphone at

least 1 meter away from your vessel’s magnetic navigation compass.

qUsing the template on the last page, carefully cut a hole

into the instrument panel (or wherever you plan to mount the controller).

wSlide the transceiver through the hole as shown below.

eAttach the 2 supplied bolts (M5 ⋅ 8 mm) on either side of the IC-M501EURO.

rAttach the clamps on either side of the transceiver.

• Make sure that the clamps align parallel to the transceiver body.

tTighten the end bolts on the clamps (rotate clockwise) so that the clamps press firmly against the inside of the in-

strument control panel.

yTighten the locking nuts (rotate counterclockwise) so that

the transceiver is securely mounted in position as below.

uConnect the antenna and control cable, then return the in- strument control panel to its original place.

20

Image 24

Contents IM501EURO Case of Emergency Installation Notes Page Operating Rules Ship Station LicenseOPERATOR’S License Panel Description Panel descriptionDimmer Switch Dimmer Call Channel Switch CallChannel 16 Switch Dial Switch DialFunction display PTT Switch PTT Channel UP/DOWN Switches Y/ZMicrophone Basic Operation Channel selectionChannel Call channelAtis and DSC channels FRG version only Receiving and transmitting Call channel programming Channel namesSet mode Scrambler code item Optional voice scrambler operationActivating the scrambler Programming scrambler codesDual WATCH/TRI-WATCH DescriptionOperation DUALWATCH/TRI-WATCH SimulationScan Operations Scan typesPriority Scan Normal ScanSetting tag channels Starting a scan To stop the scan, push ScanClearing all tag channels in the selected channel group While pushing HI/LO, push Dial for 3 sec. to clear allSET Mode Set mode programmingSET Mode Construction PushSet mode items Scan modeScan resume timer Beep toneLCD contrast Internal speakerScrambler code Scrambler unit Connections and Maintenance Fuse replacement Cleaning UnpackingConnections Microphone HangerUsing the supplied mounting bracket Mounting the transceiverOverhead Mounting Mounting on Dashboard Using the optional mounting bracket Optional unit installation Opening the transceiver caseDimensions Troubleshooting Problem Possible Cause SolutionChannel List Frequency MHz Transmit ReceiveSpecifications and Options SpeciﬁcationsOptions Blank MB-75 Template Blank 0560 Count on us