RedMax SRTZ2401 manual Limited Warranty

Page 53

RedMax

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT,

RedMax / KOMATSU ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF USE, 90 DAYS FOR RENTAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / KOMATSU ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 52 Page 54
Image 53
Page 52 Page 54
Contents SRTZ2401 Information Informationinformación Contents Advertencias Contenidas EN EL Manual Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOITables des matieres Contenido Parts location SpecificationsEspecificaciohes Emplacement des pieces Situación de las piezasFiche technique Emission Control Symbols on the machinePosition Posición EmplacementControl DE Emisiones Information Importante Concernant LE MoteurWorking Circumstance For safe operationWorking Condition Conditions DE Travail Consignes de securite Instrucciones de seguridadCondiciones DE Trabajo PrecaucionesBefore Starting the Engine Working PlanPlan DE Trabajo Plan DE TravailAvant DE Mettre LE Moteur EN Marche Antes DE Arrancar EL MotorStarting the Engine Using the ProductUtilisation DE LA Machine Demarrage DU MoteurArranque DEL Motor USO DEL ProductoIf Someone Comes MaintenanceEntretien SI QUELQU’UN S’APPROCHESI Alguien SE Aproxima MantenimientoTransportation Handling FuelRefill after cooling the engine Manipulación DEL Combustible Manipulation DU CarburantLlenar una vez que el motor se haya enfriado TransportSE1 SE2 Installing Handle Set upAttaching the Trimming Mechanism SE2 Balance UnitMise EN Place DE LA Poignee Assemblage MontajeInstalación DEL Mango Equilibrage DE LA MachineRecommended Mixing Ratio Gasoline 50OIL When using Zenoah genuine oilFuel Carburant Combustible Rapport DE Melange Recommande Essence 50 HuileLors de l’utilisation de la véritable huile Zenoah Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFor Your Engine LIFE, Avoid HOW to MIX FuelFueling the Unit Remplissage DU Reservoir Comment Obtenir UN BON Melange Como Mezclar EL CombustibleEviter Pour Prolonger LA Duree DE VIE DU Moteur Abastecimiento DE LA UnidadFuel Aceite Para USO EN Motores DE 4-TIEMPOS Cutting head will start rotating upon the engine starts OperationOP1 OP2 OP3 OP4 Starting Engine Palanca del estrangulador 2 cerrar Fonctionnement UsoAdjusting Idling Speed OP6 Adjusting Throttle CableOP5 OP6 Stopping Engine OP3Ajuste Cable DEL Acelerador Reglage Câble D’ACCÉLÉRATEURReglage DU Ralenti OP6 Ajuste DE LA Velocidad DE Marcha EN Vacío OP6Clamp bolt Trimming mechanism Tighten Loosen OP7 Adjusting the Angle of the Cutting Blades OP7Boulon de serrage Mécanisme de coupe Serrer Desserrer Réglage DE Langle DES Lames Tranchantes OP7Ajuste DEL Ángulo DE LAS Cuchillas DE CORTE. OP7 Perno de sujeción Mecanismo de poda Ajustar AflojarMaintenance Chart MaintenanceMantenimiento EntretienTableau D’ENTRETIEN Tabla DE MantenimientoBlades MA1 MA1Quick TIP MA2Entretien Mantenimiento MA3 MA4 MA5 Replacement Plug is a NGK CMR7HAIR Filter Fuel FilterFiltro DE Aire Filtre a AIRFiltre a Carburant Filtro DE Combustible Bougie D’ALLUMAGE BujíaSpark Arrester Muffler MA6Spark arrester Intake AIR Cooling VentOuïe DU Refroidissement PAR AIR PARE-ETINCELLESParachispas Toma DE Aire DE RefrigeraciónStorage Procedures to be Performed After Every 100 Hours of USEMA7 MA8 Cylinder Intake air cooling vent backRangement Almacenamiento Procedure a Effectuer Toutes LES 100 Heures D’UTILISATIONCylindre Ouïe d’entrée d’air de refroidissement arrière Cilindro Toma de aire de refrigeración posteriorGuide de localisation des pannes Troubleshooting guide11. Guía de localización y solución de problemas Nota SRTZ2401Parts list Cutting Unit SRTZ2401 S/N Z000001 and up Engine Unit SRTZ2401 S/N 60100101 and up Qty Key# Part Number Description Owner’s warranty responsibilities Manufacturer’s warranty coverageObligations du propriétaire liées à la garantie Couverture de la garantie constructeurResponsabilidades del propietario Cobertura de la garantía dada por el fabricanteLimited Warranty RedMax Garantie limitée Garantía Limitada Komatsu Zenoah America INC

SRTZ2401 specifications

The RedMax SRTZ2401 is a powerful and versatile tool poised to meet the needs of professionals in the landscaping and horticulture industries. Engineered for efficiency, this two-cycle string trimmer is designed with the user in mind, offering a blend of advanced technologies and features that enhance performance and ease of use.

One of the standout features of the SRTZ2401 is its lightweight design. Weighing in at only 10.4 pounds, it ensures that users can maneuver effortlessly about various job sites, reducing fatigue during prolonged use. This is particularly beneficial for landscaping professionals who require durability without the burden of excess weight.

At the heart of the SRTZ2401 is a 23.9 cc engine that delivers exceptional power and efficiency. This engine not only provides strong performance for cutting through thick grass and weeds but also boasts a fuel-efficient design, allowing for longer run times between refuels. The engine's low emissions meet stringent environmental standards, making the SRTZ2401 an eco-friendly option for professionals.

The SRTZ2401 is equipped with a unique anti-vibration technology that minimizes vibrations throughout the tool. This feature significantly enhances user comfort, allowing for extended periods of use without discomfort or strain. Coupled with an ergonomic handle design, it contributes to a user-friendly experience, keeping fatigue at bay during demanding tasks.

Another notable characteristic of the SRTZ2401 is its innovative cutting head design. It offers a dual-line capability, delivering a cleaner cut while maximizing efficiency. The automatic line feed system ensures hassle-free operation; users can easily replace the line with minimal effort, maintaining productivity throughout the day.

Additionally, the RedMax SRTZ2401 includes an adjustable handle, allowing operators to customize the grip for better control and maneuverability. This feature is crucial for navigating tight spaces and achieving precise cuts in delicate areas.

Overall, the RedMax SRTZ2401 stands out as a top-tier choice for those in need of a reliable, efficient, and powerful string trimmer. Its impressive combination of lightweight construction, robust engine performance, user comfort, and ease of maintenance makes it a valuable addition to any landscaping toolkit. Whether tackling residential lawns or commercial landscapes, the SRTZ2401 promises to deliver consistent results and unmatched reliability.
Top Page Image Contents