RedMax EXZ2401S-BC manual Limited Warranty

Page 59

RedMax

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT, KOMATSU ZENOAH AMERICA INC. (THE COMPANY),

THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSY, COIL ASSY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF USE, 90 DAYS FOR RENTAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD.ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMNET POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DULABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PARTS STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBULICATION, USE OF ANY PARTS OR ACCESSARIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE CONPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMINATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL KOMATSU ZENOAH AMERICA INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOA AMERICA WITHIN SEVEN (7) DAYS.BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 58 Page 60
Image 59
Page 58 Page 60
Contents 848-J8P-93A0 OWNER/OPERATOR ManualContents Safety First 3  Parts locationEX-HE SpecificationsEX-LRT EX-PS 5   6  Symbols on the machine 7  For safe operationWorking Condition Working Circumstance 8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Set upBalance Unit Set up EX2-BC onlyEX2-BC SE1 EX2-BC SE2 EX2-BC SE3 Installing Debris Guard Installing Cutting Head SE2 15  Set up EX-LRT onlyEX-LRT SE1 Attaching the Trimming Mechanism SE1 Main pipe Trimming mechanism Screw hole Fastening boltEX-PS SE3 Set up EX-PS onlyEX-PS SE1 Attaching the Pruning Mechanism SE1 EX-PS SE2 17  Chain tension adjusting screw Loosen TightenEX-PS SE4 EX-PS SE5 EX-PS SE6 Hole Moving direction Chain tensioner nutBracket Set up EX-HE onlyEX-HE SE1 EX-HE SE2 EX-HE SE3 EX-HE SE4 Clamp bolt Lock screwRecommended Mixing Ratio Gasoline 50OIL When using Zenoah genuine oilHOW to MIX Fuel Fuel and chain oilChain OIL EX-PS only Fueling the UnitFor Your Engine LIFE, Avoid  20  21  Operation 22  OP6 OP7 OP8Stopping Engine OP6  23  Adjusting Throttle CableAdjusting Idling Speed OP10 OP9 24  Operation EX2-BC only 25  Operation Optional blade usage EX2-BC only 26  EX2-BC OP4 EX2-BC OP5 EX2-BC OP6Bracket Handle Cutting Method 27  EX2-BC OP7 EX2-BC OP8 OperationControlling Blade Thrust What causes blade thrust 28  How you can reduce the chance of blade thrustHow you can maintain the best control  29  EX2-BC OP9 Maintenance BladeTransporting the Unit Clamp lever Trimming mechanism Adjusting the Angle of the Cutting Blades OP1Operation EX-LRT only EX-LRT OP1 31  Adjusting OIL Flow RateOperation EX-PS only EX-PS OP1 EX-PS OP2 Checking OIL Supply 32   33  Operation EX-HE onlyEX-HE OP1  34  MaintenanceMaintenance Chart  35  Spark Arrester MA4 36  MufflerCylinder Intake air cooling vent back Procedures to be Performed After Every 100 Hours of USEMA51 MA6Gear Case MA2 Maintenance EX2-BC onlyFor safety reasons, do not use metalreinforced line EX2-BC MA1 EX2-BC MA2 Refilling Trimming Line MA1Gear Case Maintenance EX-LRT onlyEX-LRT MA1 EX-LRT MA2 Blades MA1 Quick TIP 40  Maintenance EX-PS onlyEX-PS MA1 MA2 MA3 Oiling Port Guide BARSAW Chain EX-PS MA4 MA5 MA6Sprocket  42  EX-PS MA7 MA8 MA9 43  Maintenance EX-HE onlyMA1 Gear Case  44  Troubleshooting guideStorage Check Probable Causes ActionEX-LRT ATT EX-PS ATT EX-HE ATT Parts list 46  EXZ-PU S/N 60300000 and up 47   48  EX2-BC S/N 50200000 and up 49   50  Engine Unit 60100000 and upDescription Part Number Qty  51  52  EX-LRT S/N 000531 and upCasing B  53  54  EX-PS S/N 000000 and up 55   56  EX-HE S/N 000101 and up 57  Manufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée

EXZ2401S-BC specifications

The RedMax EXZ2401S-BC is a cutting-edge, lightweight brush cutter designed for both professional landscapers and discerning homeowners. Renowned for its power, efficiency, and innovative features, the EXZ2401S-BC is a superb choice for tackling demanding vegetation management tasks with ease.

One of the standout features of the RedMax EXZ2401S-BC is its powerful engine. It is equipped with a robust 24.5 cc two-stroke engine that delivers exceptional torque and speed. This engine is designed to offer impressive cutting performance while maintaining low emissions, complying with stringent environmental standards. The advanced engine technology not only ensures effective operations but also enhances fuel efficiency, allowing users to work for longer periods without frequent refueling.

The design of the EXZ2401S-BC emphasizes user comfort and ease of use. It features an ergonomic handle that provides a secure grip and minimizes vibrations, making it comfortable during extended use. The lightweight construction contributes to reduced fatigue and allows for better maneuverability, ensuring that users can navigate through tight spaces and uneven terrain without difficulty.

In terms of versatility, the RedMax EXZ2401S-BC comes with a dual-line cutting head as standard, which is ideal for trimming grass and light weeds. The capability to interchange between different attachments, such as blades for thicker brush or other cutting tools, enhances its utility. This makes it a multipurpose tool in any landscaping toolkit.

Another notable aspect of the EXZ2401S-BC is its ease of starting. The unit features a reliable starting system that allows for quick and hassle-free ignition. This is particularly important in professional settings where time is of the essence, and projects must adhere to strict deadlines.

Safety is also a priority in the design of the RedMax EXZ2401S-BC. It is equipped with advanced safety features, including a throttle lock that prevents accidental starts and a protective guard around the cutting area, ensuring user protection during operation.

In summary, the RedMax EXZ2401S-BC is a high-performance brush cutter that combines power, versatility, and user-friendly features. With its efficient engine, ergonomic design, and safety enhancements, this brush cutter is ideal for professionals and hobbyists alike, making it a valuable addition to any landscaping arsenal. Whether it's for commercial landscaping or maintaining a residential garden, the EXZ2401S-BC excels in delivering quality performance and reliable service.
Top Page Image Contents