RedMax HEZ3050S, HEZ2450S manual Contents

Page 2

HEZ2450S/HEZ3050S

SAFETY FIRST

Instructions contained in warnings within

this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail.

WARNINGS IN THE MANUAL

WARNING

This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death.

IMPORTANT

This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage.

NOTE

This mark indicates hints or directions useful in the use of the product.

WARNING

1.Read this stick edger Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury.

2.Be sure to keep this manual handy so that you may refer to it later whenever any questions arise. Also note that you are requested to contact the dealer from whom you purchased the product for assistance the event that you have any questions which cannot be answered herein.

3.Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product.

4.Do not lend or rent your machine without the owner's manual.

5.Be sure that anyone using your unit understands the infomation contained in this manual.

6.Never let a child under 13 years old use the machine.

Contents

1.

Parts location

3

2.

Specifications

3

3.

Warning labels on the machine

4

4.

Symbols on the machine

4

5.

For safe operation

5

6.

Set up

9

7.

Fuel

10

8.

Operation

12

9.

Maintenance

14

10.

Storage

17

11.

Disposal

17

12.

Troubleshooting guide

17

US-2

Image 2
Contents HEZ2450S HEZ3050S Contents Specifications Parts locationManufactured Symbols on the machineEmission Control For safe operation Starting the engine Using the productBefore use Transport Fuel safetyMaintenance StorageDisposal Screw Clamp bolt Tightning Torque 70~130 in-lb 8~15 N.m Set upMounting Other Parts SE1 SE2Fuel WarrantyFuel Gasoline RequirementsFueling the Unit HOW to MIX Fuel Recommended Mixing Ratio Gasoline 50 OILFor Your Engine LIFE, Avoid Operation Adjusting Idling Speed OP7 OP8 HOW to USEAdjusting Throttle Cable Stopping Engine OP4Maintenance Maintenance ChartMA4 MA1 AIR FilterMuffler Spark ArresterIntake AIR Cooling Vent Procedures to be Performed After Every 100 Hours of USEMA6 Blade MA6 MA8Disposal Troubleshooting guideStorage Case 1. Starting failureWarranty Commencement Date Manufacturers Warranty CoverageOwners Warranty Responsibilities What is CoveredHOW to File a Claim Emission Warranty Parts ListWhat is not Covered Where to GET Warranty Service