RedMax BCZ2600S MA5 MA6 Muffler, Spark Arrester, Gear Case MA6, Intake AIR Cooling Vent,  23 

Page 23

9. Maintenance

MA5

(1)

MA6

MUFFLER

WARNING

Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired immediately.

Note that failing to do so may result in the engine catching on fire.

SPARK ARRESTER

The muffler is equipped with a spark arrester to prevent red hot carbon from flying out of the exhaust outlet. Periodically inspect and clean as necessary with a wire brush. In the State of California it is required by law (Section 4442 of the California Public Resources Code) to equip a spark arrester when a gas powered tool is used in any forest covered, brush covered, or grass covered unimproved land. (MA5)

(1) spark arrester

GEAR CASE (MA6)

The reduction gears are lubricated by multipurpose, lithium-based grease in the gear case. Supply new grease every 25 hours of use or more often depending on the job condition.

Remove the cutter holders before installing new grease to arrange for old grease to exit.

INTAKE AIR COOLING VENT

WARNING

Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached

23

Image 23
Contents BCZ2600SU BCZ2600SWPage Contents Safety First 4  SpecificationsParts location  5   6  Symbols on the machine 7  For safe operationWorking Condition Working Circumstance 8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Putting on Waist PAD SE5SE6 SE7 SE8 SE9 Mounting Engine SE5 15  Set upInstalling Cutting Head SE10 Balance UnitRecommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  16 For Your Engine LIFE, Avoid Fueling the UnitOP4 OperationOP1 Starting Engine 19   20  Adjusting the Line LengthOP7  21  MaintenanceMaintenance Chart MA1 Refilling Trimming Line MA1 22  Intake AIR Cooling Vent MA5 MA6 MufflerSpark Arrester Gear Case MA6 24  Procedures to be Performed After Every 100 Hours of USEMA8  25  Storage 26  Optional blade usageCutting Method OPT3BCZ2600SU OPT4 BCZ2600SU OPT5 OPT6Controlling Blade Bounce OPT7 OPT8 28  Operation 29  What causes kick out 30  OPT9 Maintenance BladeTransporting the Unit  31  Troubleshooting guideCheck Probable Causes Action  32   33  Parts list 34   35  Optional Blade & Accessories 36  Drive Unit BCZ2600SW S/N 300001 and up 37  Optional Blade 38   39  BCZ2600S S/N 300101 and up BCZ2600SU S/N 300101 and upManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans Page Komatsu Zenoah America INC