Tascam CD-RW2000 owner manual Recommended media Default settings, Dimensional drawing

Page 9

1 – Introduction—Environmental considerations

from sources of heat such as radiators or heat-gen- erating electrical devices.

Always store CD-R discs in their “jewel cases” to avoid dirt and dust accumulating on their surfaces.

Do not put labels or protective sheets on the discs and do not use any protective coating spray.

When labeling CD-R discs, always use a soft oil- based felt-tipped pen to write the information. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.

Dirty discs may be cleaned using a soft dry cloth and/or a commercial CD cleaning fluid or ethyl alcohol. Do not use thinner, gasoline, benzene or LP cleaning fluid, as these will damage the disc.

If you are in any doubt as to the care and handling of a CD-R disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

1.4.5Recommended media

An up-to-date list of manufacturers who produce media suitable for use in the CD-RW2000 can be obtained from your TASCAM dealer, or found on the TASCAM Web site at http://www.tascam.com.

1.4.6Default settings

The default settings when the CD-RW2000 is shipped from the factory are given below.

Setting

Description

Default value

 

 

 

Input selection

4.1, “Input selection”

Unbalanced

 

 

Auto track

4.3.2, “Automatic track On

(A_TRACK)

division”

 

 

 

Auto ready

3.5, “Auto Ready func- Off

(A_READY)

tion”

 

 

 

Auto cue

3.6, “Auto Cue function” Off

(A_CUE)

 

 

 

 

 

Incremental play

3.7, “Incremental play”

Off

(INC PLAY)

 

 

 

 

Word sync

2.4.1, “Word sync con- Off

(WORDSYNC)

nections”

 

 

 

 

Copy ID (COPY ID)

4.4, “Copy-protection”

1 generation

 

 

 

Digital direct

4.3.3, “Digital direct”

Off

(D_DIRECT)

 

 

 

 

 

Trigger level

4.3.1, “Synchronized

–54 dB

(S_LEVEL)

recording”

 

 

 

 

FADE IN time

4.3.5, “Fade-in and

3 seconds

 

fade-out”

 

 

 

 

FADE OUT time

4.3.5, “Fade-in and

3 seconds

 

fade-out”

 

 

 

 

Digital Volume

4.1.1, “Signal volume”

0 dB

 

 

 

Play mode

3.1.3, “Playback

Continue

 

modes”

 

 

 

 

Trim

4.5, “Rehearsal”

±0 frames

 

 

 

1.4.7Dimensional drawing

483mm(19.0")

465mm(18.3"))

(3.0")

(3.5")

(3.9")

76mm

88mm

98mm

435mm(17.1")

21mm(0.8")

284.5mm(11.2")

 

12mm(0.5")

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TASCAM CD-RW2000 9

Image 9
Contents CD-RW2000 Important for U.K. Customers Important Safety PrecautionsImportant Safety Instructions Safety Information Table of Contents About CD-R and CD-RW discs IntroductionFinalizing Introduction-FinalizingUnpacking the CD-RW2000 Environmental considerationsBeware of condensation Introduction-Environmental considerationsNever use a stabilizer or printable discs Handling of compact discsRecommended media Default settings Dimensional drawingSetting Description Default value Features of the CD-RW2000 Front panel Features of the CD-RW2000-Front panelRear panel Features of the CD-RW2000-Rear panelFeatures of the CD-RW2000-Remote control unit Remote control unitConnections Word sync connections Features of the CD-RW2000-ConnectionsControl connections Digital Coaxial OUT jack X and DigitalSimple playback operations Playback operationsTime display modes Track searchPlayback operations-Programmed order playback Programmed order playbackRepeat play Call playback Playback operations-CALL playbackAuto Ready function Auto Cue functionRecording Signal volumeInput selection Input monitoringBasic recording Recording-Basic recordingPlaying back tracks Time display while recordingAdvanced recording Recording-Advanced recording24,-30,-36,-42,-48,-54,-60,-66, and -72 dB Sound level drops below the threshold level for five seconds Track incremented Automatic track divisionDigital direct Rec mute functionFade-in and fade-out While recording is in progress, press the REC Mute key FCopy-protection Recording-Copy-protectionRehearsal Play or Pause keysRehearsal for synchronized recording Recording-RehearsalRehearsal for track division Erasing After recordingUnfinalizing CD-RW discs Erasing tracksAfter recording-Erasing Erasing a whole discRefreshing a disc Troubleshooting Reference and specificationsSpecifications Symptom Possible cause and remedyReference and specifications-Specifications CD-RW2000