Operation | RedMax EXZ2460S-PH manual

EXZ2460S-PH

8. Operation

(HE-EX2 only)

The RedMax stick edger is designed for edging lawn in gardens, parks, roadsides and so on.

Before starting the engine, take the operating position and adjust the handle position and the wheel height as necessary.

OP4

(1)

(2)

(3)

4.Move the choke lever to the closed position. (OP4)

(1) choke lever

(2) close

(3) open

5. Set the stop switch to the "RUN"

position. Place the unit on a flat, firm

OP1

(1)

(2)

(3)

ADJUSTING WHEEL HEIGHT

1.Loosen the wing nut and change the wheel height to obtain desired cutting depth. (OP1)

(1)Deep cut

(2)Shallow cut

(3)Wing nut

2.After adjusting the height, tighten the wing nut securely.

OP5
	(3)
(2)
(1)	(a)
(1)
	(b)

place. Keep the cutting head clear of

everything around it. (OP5)

(1)stop switch

(2)RUN

(3)STOP

(a)lockout lever

(b)throttle trigger

6. Firmly grasp (a) and (b) with left hand

(OP5), pull the starter knob quickly until

Tightening Torque:

51~68 in-lbs (6~8 N.m)

WARNING

Never adjust wheel height with the engine running.

OP6

engine fires. Release throttle trigger

after engine starts. (OP6)

IMPORTANT

•Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

OP2

OP3

■STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap securely. (OP2)(1)

(PS-EX only) Feed the chain oil into the oil tank and tighten the cap securely, too. (OP2)(2)

(1)Fuel

(2)Chain oil

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

3.Push the primer pump several times until overflown fuel flows out in the clear tube. (OP3)

7.Move the choke lever downward to open the choke. And restart engine. (OP4)

8.Allow the engine to warm up for several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

■STOPPING ENGINE (OP5)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the stop switch to the "STOP" position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the

US-15

EXZ2460S-PH specifications

The RedMax EXZ2460S-PH is a powerful and innovative addition to the lineup of handheld outdoor power equipment. Designed primarily for professional landscaping and maintenance tasks, this versatile tool is engineered for efficiency, performance, and user comfort.

At the heart of the EXZ2460S-PH is a robust 24.5cc two-stroke engine, known for its reliability and fuel efficiency. This engine technology not only delivers impressive power but also enhances torque, ensuring that the performance meets the rigorous demands of landscaping professionals. The engine is designed with a reliable starting system, minimizing downtime and allowing users to get straight to work.

One of the standout features of the EXZ2460S-PH is its ergonomic design. The tool is fitted with a comfortable handle and a lightweight body, reducing user fatigue even during extended periods of use. This focus on comfort is complemented by a well-balanced design that allows operators to maneuver easily around obstacles, making trimming and pruning tasks more efficient.

The EXZ2460S-PH also incorporates advanced anti-vibration technology, which significantly reduces vibration transfer to the user’s hands. This technology promotes longer use without discomfort, making it ideal for both professionals and homeowners who require a reliable solution for yard maintenance.

Moreover, the RedMax EXZ2460S-PH is equipped with a high-capacity air filter that enhances air intake, resulting in improved engine performance. This filter is designed for easy maintenance, further contributing to the tool’s operational efficiency and lifespan.

Another notable characteristic is the tool's versatility. The EXZ2460S-PH can easily switch between different attachments, allowing users to tackle various tasks such as grass trimming, hedge cutting, and much more. This adaptability makes it an invaluable tool for landscape professionals who require multi-functionality in their equipment.

In terms of safety features, it boasts a throttle lock and a safety guard, ensuring that users can operate the machine with confidence.

In conclusion, the RedMax EXZ2460S-PH is a cutting-edge handheld tool that stands out for its powerful engine, ergonomic design, advanced technology, and versatility. It is engineered to meet the demanding needs of landscaping professionals, making it a valuable investment for anyone looking to elevate their outdoor maintenance tasks. With its combination of performance and comfort, the EXZ2460S-PH is poised to lead in the market of outdoor power equipment.