PS-EX MA1, Oiling Port, PS-EX MA6, Sprocket

EXZ2460S-PH

9. Maintenance

PS-EX MA1

(1)

(PS-EX only)

■OILING PORT

Dismount the guide bar and check the oiling port for clogging. (MA1)

(1) Oiling port

PS-EX MA6

Cutter setting standards:

WARNING

Be sure to wear safety gloves.

Before filing:

•	Make sure the saw chain is held
	securely.
•	Make sure the engine is stopped.

PS-EX MA2

PS-EX MA3

PS-EX MA4

PS-EX MA5

■GUIDE BAR

Remove sawdust in the bar groove and the oiling port. (MA2)

(1)Groove

(2)Oiling port

(Type: Sprocket nose)

Grease the nose sprocket from the feeding port on the tip of the bar. (MA3)

(1)Grease port

(2)Sprocket

The bar rail should always be a square. Check for wear of the bar rail. Apply a ruler to the bar and the outside of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced.(MA4)

(1)Ruler

(2)Gap

(3)No gap

(4)Chain tilts

■SPROCKET

Check for extensive wear, and replace it when the teeth are worn over 0.3mm. (MA5)

(1) Sprocket

■SAW CHAIN

PS-EX MA7

PS-EX MA8

• Use a round file of proper size for your

chain.

Chain type : 90SG

File size : 5/32 in (4.0mm)

Place your file on the cutter and push straight forward. Keep the file position as illustrated. (MA6)

After every cutter has been set, check the depth gauge and file it to the proper level as illustrated. (MA7)

WARNING

Be sure to round off the front edge to reduce the chance of kickback or tie- strap breakage.

(1)Appropriate gauge checker

(2)Make the shoulder round

(3)Depth gauge standard

Make sure every cutter has the same length and edge angles as illustrated. (MA8)

(4)Cutter length

(5)Filing angle

(6)Side plate angle

(7)Top plate cutting angle

WARNING

It is very important for smooth and safe operation to keep the cutters always sharp.

Your cutters need to be sharpened when:

•Sawdust becomes powder-like.

•You need extra force to saw in.

•The cut way does not go straight.

•Vibration increases.

•Fuel consumption increases.

US-26

PS-EX MA9

■GEAR CASE

The reduction gears are lubricated by multipurpose, lithium-based grease in the gearcase.

Supply new grease every 25 hours of use or more often depending on the job condition.

When adding lubricant, use a grease gun to insert lubricant into the three grease nipples located on the gear case. (MA9)

(1) Grease fitting

EXZ2460S-PH specifications

The RedMax EXZ2460S-PH is a powerful and innovative addition to the lineup of handheld outdoor power equipment. Designed primarily for professional landscaping and maintenance tasks, this versatile tool is engineered for efficiency, performance, and user comfort.

At the heart of the EXZ2460S-PH is a robust 24.5cc two-stroke engine, known for its reliability and fuel efficiency. This engine technology not only delivers impressive power but also enhances torque, ensuring that the performance meets the rigorous demands of landscaping professionals. The engine is designed with a reliable starting system, minimizing downtime and allowing users to get straight to work.

One of the standout features of the EXZ2460S-PH is its ergonomic design. The tool is fitted with a comfortable handle and a lightweight body, reducing user fatigue even during extended periods of use. This focus on comfort is complemented by a well-balanced design that allows operators to maneuver easily around obstacles, making trimming and pruning tasks more efficient.

The EXZ2460S-PH also incorporates advanced anti-vibration technology, which significantly reduces vibration transfer to the user’s hands. This technology promotes longer use without discomfort, making it ideal for both professionals and homeowners who require a reliable solution for yard maintenance.

Moreover, the RedMax EXZ2460S-PH is equipped with a high-capacity air filter that enhances air intake, resulting in improved engine performance. This filter is designed for easy maintenance, further contributing to the tool’s operational efficiency and lifespan.

Another notable characteristic is the tool's versatility. The EXZ2460S-PH can easily switch between different attachments, allowing users to tackle various tasks such as grass trimming, hedge cutting, and much more. This adaptability makes it an invaluable tool for landscape professionals who require multi-functionality in their equipment.

In terms of safety features, it boasts a throttle lock and a safety guard, ensuring that users can operate the machine with confidence.

In conclusion, the RedMax EXZ2460S-PH is a cutting-edge handheld tool that stands out for its powerful engine, ergonomic design, advanced technology, and versatility. It is engineered to meet the demanding needs of landscaping professionals, making it a valuable investment for anyone looking to elevate their outdoor maintenance tasks. With its combination of performance and comfort, the EXZ2460S-PH is poised to lead in the market of outdoor power equipment.