RedMax BCZ2500SU, BCZ2500SW manual  13 

Page 13

6. Set up (BCZ2500S, BCZ2500SU)

SE1

■ MOUNTING ENGINE (SE1)

1.

Push the driveshaft housing toward the clutch

 

 

 

housing and rotate it by hand to check that the

 

 

driveshaft is engaged with the gears.

 

2.

Insert the driveshaft housing into the clutch

 

 

housing until it bottoms, and align the positioning

 

 

holes on the clutch housing and the shaft tube

 

 

and install the screw. When difficult to engage,

 

 

twist the engine slightly.

 

3.

Fasten the clamp securely with two screws.

SE2

 

 

IMPORTANT

Tighten the screws gradually by turns.

■CONNECTING THROTTLE WIRE

1. Remove the air cleaner cover.

2. Connect the end of the throttle wire to the joint on the top of the carburetor. (SE2)

SE3

(1)

SE4

(1)

(2)

(3)

■CONNECTING SWITCH WIRES

•Connect the switch wires between the engine and the main unit. Pair the wires of the same color.

■INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that is comfortable to you. (SE3)

(1) About 19 inches (48cm)

■INSTALLING DEBRIS GUARD

•Put the debris guard on the gear box, attach it with the 4 screws and hardware provided. (SE4)

(1)debris guard

(2)plate

(3)screw

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents BCZ2500S T3002-93111BCZ2500SW BCZ2500SUPage Contents Safety FirstParts location SpecificationsBCZ2500S/BCZ2500SU/BCZ2500SW Overall sizeLxWxH  4  5  Type de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc Symbols on the machine 6  Working Condition For safe operationWorking Circumstance  8  Working PlanStarting the Engine Before Starting the Engine 9   10  Using the ProductIf Someone Comes MaintenanceHandling Fuel  11  12  Transportation 13  SE6 SE5SE7 SE8 SE9 Mounting Engine SE5 Putting on Waist PADInstalling Cutting Head SE10 Set upSE10 SE11 Balance UnitFuel HOW to MIX Fuel 16  Recommended Mixing Ratio Gasoline 50OILFor Your Engine LIFE, Avoid Fueling the Unit 17  OP1 OperationStarting Engine OP4 19  OP7 Adjusting the Line Length 20  Maintenance Chart MaintenanceFor safety reasons, do not use metalreinforced line MA1 MA2 MA3 MA4 Refilling Trimming Line 22  Spark Arrester MA8 MA9Gear Case MA9 Intake AIR Cooling VentMA101 MA11 Procedures to be Performed After Every 100 Hours of USECylinder Intake air cooling vent back  24  25  Storage 26  Optional blade usageBCZ2500SU OPT4 OPT3OPT5 OPT6 Cutting Method 28  OPT7 OPT8Operation Controlling Blade BounceHow you can reduce the chance of kick out What causes kick outHow you can maintain the best control  29 Transporting the Unit OPT9 Maintenance Blade 30  Check Probable Causes Action Troubleshooting guide 31   32   33  Parts list 34   35  Optional Blade & Accessories 36  Drive Unit BCZ2500SW S/N 100001 and up 37  Optional Blade 38   39  BCZ2500S S/N 35208 and up BCZ2500SU S/N 35208 and upManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans

BCZ2500SW, BCZ2500S, BCZ2500SU specifications

The RedMax BCZ2500SU, BCZ2500S, and BCZ2500SW are part of RedMax’s line of lightweight and highly efficient brush cutters, designed for both professionals and serious enthusiasts. These models stand out for their performance, versatility, and thoughtful integration of advanced technologies, making them ideal for various landscaping and forestry tasks.

At the core of these brush cutters is a powerful 25cc 2-stroke engine that delivers robust performance while maintaining excellent fuel efficiency. This engine design is not only lightweight but also allows for greater maneuverability, which is essential for tackling tighter spaces and challenging areas. The engine also features low emissions technology, ensuring compliance with environmental standards while being kinder to the planet.

One of the standout features across these models is the Easy Start system, which significantly reduces the pull force needed to start the engine. This user-friendly technology minimizes the effort required, making it suitable for all users, especially those who may be less physically capable or are just starting with brush-cutting tasks.

The ergonomic design of the BCZ2500 series includes a comfortable grip and a well-positioned front handle that promotes proper posture and control. This design not only increases comfort during prolonged use but also enhances precision and reduces operator fatigue. The inclusion of a harness in the BCZ2500SU and the BCZ2500SW models further ensures optimal weight distribution, allowing users to work efficiently for extended periods.

Each model is equipped with a high-quality cutting head that accepts both nylon line and metal blades. This versatility allows users to switch between cutting modes depending on the task at hand, whether it’s trimming grass, clearing brush, or handling tougher vegetation. The BCZ2500SW model is particularly noted for its advanced 2-in-1 capability, featuring both a brush cutter and a trimmer in one tool, streamlining the work process.

The RedMax BCZ2500 series is built to last, featuring durable materials that can withstand the rigors of heavy use in demanding environments. They also come with easy-to-access maintenance points, ensuring that users can keep their equipment in optimal condition with minimal hassle.

In summary, the RedMax BCZ2500SU, BCZ2500S, and BCZ2500SW brush cutters embody a blend of power, efficiency, and user-friendliness. With their impressive engine technology, ergonomic design, and versatile cutting capabilities, they are excellent choices for those seeking reliable performance in landscaping and vegetation management tasks. Whether for professional landscaping services or personal property maintenance, these models are designed to meet the varying demands of users while delivering exceptional results.
Top Page Image Contents