RedMax BCZ2500SW manual OPT3, BCZ2500SU OPT4, OPT5 OPT6, Cutting Method,  27 

Page 27

11. Optional blade usage

OPT3

BCZ2500S,

BCZ2500SU

OPT4

BCZ2500S, BCZ2500SU

OPT5

OPT6

IMPORTANT

[ BCZ2500S, BCZ2500SU ]

Change to the debris guard which is suitable for the metal blade. (OPT3)

TIGHTENING TORQUE: 130~174 in-lbs(14.7~19.6 N.m.)

(1)Guard Ass’y:	6489-24000	(6)Screw:	0277-10412
(2)Guard:	6489-24110	(7)Plate:	6489-24120
(3)Plate Comp.:	6489-24200	(8)Washer:	01601-20513
(4)Plate:	6489-24210	(9)Bolt:	01252-30516
(5)Blade:	6489-24220

IMPORTANT

[ BCZ2500S, BCZ2500SU ]

Change the loop handle to the J-handle for safe operation. (OPT4)

(1)Bracket: 3583-14101

(2)J-handle: 6367-14200

■STARTING THE ENGINE

Please refer 5.For safe operation (P.9~11), 8.Operation (P.18).

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT5)

■CUTTING METHOD

a)Use the front left side cutting.

b)Guide the blade from your right to left with it tilted slightly to your left. (OPT6)

c)When mowing a wide area, start working from your left end to avoid interference of cut grass.

d)The blade may be seized by weeds if the engine

27 

Image 27

Contents BCZ2500SU T3002-93111BCZ2500S BCZ2500SWPage Contents Safety First 4  SpecificationsParts location BCZ2500S/BCZ2500SU/BCZ2500SW Overall sizeLxWxH 5  Symbols on the machine Type de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc 6  For safe operation Working ConditionWorking Circumstance  8  Working PlanBefore Starting the Engine Starting the Engine 9   10  Using the Product 11  MaintenanceIf Someone Comes Handling Fuel 12  Transportation 13  Putting on Waist PAD SE5SE6 SE7 SE8 SE9 Mounting Engine SE5Balance Unit Set upInstalling Cutting Head SE10 SE10 SE11Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  16 Fueling the Unit For Your Engine LIFE, Avoid 17  OP4 OperationOP1 Starting Engine 19  Adjusting the Line Length OP7 20  MA1 MA2 MA3 MA4 Refilling Trimming Line MaintenanceMaintenance Chart For safety reasons, do not use metalreinforced line 22  Intake AIR Cooling Vent MA8 MA9Spark Arrester Gear Case MA9  24  Procedures to be Performed After Every 100 Hours of USE MA101 MA11 Cylinder Intake air cooling vent back 25  Storage 26  Optional blade usageCutting Method OPT3BCZ2500SU OPT4 OPT5 OPT6Controlling Blade Bounce OPT7 OPT8 28  Operation 29  What causes kick outHow you can reduce the chance of kick out How you can maintain the best controlOPT9 Maintenance Blade Transporting the Unit 30  Troubleshooting guide Check Probable Causes Action 31   32   33  Parts list 34   35  Optional Blade & Accessories 36  Drive Unit BCZ2500SW S/N 100001 and up 37  Optional Blade 38   39  BCZ2500S S/N 35208 and up BCZ2500SU S/N 35208 and upManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans