RedMax BCZ2500SW, BCZ2500SU manual RedMax 2-YEAR Limited Warranty

Page 41

RedMax 2-YEAR LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY, KOMATSU ZENOAH AMERICA INC. (THE COMPANY), THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSY, COIL ASSY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF HOME USE [ ONE (1) YEAR FOR ANY OTHER USE ] FROM THE DATE OF ORIGINAL ANY DELIVERY, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD.ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMNET POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DULABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAIRURE OF A WARRANTED PARTS STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENT MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBULICATION, USE OF ANY PARTS OR ACCESSARIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE CONPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME USE [ ONE (1) YEAR FOR ANY OTHER USE ] FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMINATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL KOMATSU ZENOAH AMERICA INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOA AMERICA WITHIN SEVEN (7) DAYS.BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Image 41
Contents BCZ2500S T3002-93111BCZ2500SW BCZ2500SUPage Contents Safety FirstParts location SpecificationsBCZ2500S/BCZ2500SU/BCZ2500SW Overall sizeLxWxH  4  5   6  Symbols on the machineType de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc Working Circumstance For safe operationWorking Condition  8  Working Plan 9  Before Starting the EngineStarting the Engine  10  Using the ProductIf Someone Comes MaintenanceHandling Fuel  11  12  Transportation 13  SE6 SE5SE7 SE8 SE9 Mounting Engine SE5 Putting on Waist PADInstalling Cutting Head SE10 Set upSE10 SE11 Balance UnitFuel HOW to MIX Fuel 16  Recommended Mixing Ratio Gasoline 50OIL 17  Fueling the UnitFor Your Engine LIFE, Avoid OP1 OperationStarting Engine OP4 19   20  Adjusting the Line LengthOP7 Maintenance Chart MaintenanceFor safety reasons, do not use metalreinforced line MA1 MA2 MA3 MA4 Refilling Trimming Line 22  Spark Arrester MA8 MA9Gear Case MA9 Intake AIR Cooling VentMA101 MA11 Procedures to be Performed After Every 100 Hours of USECylinder Intake air cooling vent back  24  25  Storage 26  Optional blade usageBCZ2500SU OPT4 OPT3OPT5 OPT6 Cutting Method 28  OPT7 OPT8Operation Controlling Blade BounceHow you can reduce the chance of kick out What causes kick outHow you can maintain the best control  29  30  OPT9 Maintenance BladeTransporting the Unit  31  Troubleshooting guideCheck Probable Causes Action  32   33  Parts list 34   35  Optional Blade & Accessories 36  Drive Unit BCZ2500SW S/N 100001 and up 37  Optional Blade 38   39  BCZ2500S S/N 35208 and up BCZ2500SU S/N 35208 and upManufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans

BCZ2500SW, BCZ2500S, BCZ2500SU specifications

The RedMax BCZ2500SU, BCZ2500S, and BCZ2500SW are part of RedMax’s line of lightweight and highly efficient brush cutters, designed for both professionals and serious enthusiasts. These models stand out for their performance, versatility, and thoughtful integration of advanced technologies, making them ideal for various landscaping and forestry tasks.

At the core of these brush cutters is a powerful 25cc 2-stroke engine that delivers robust performance while maintaining excellent fuel efficiency. This engine design is not only lightweight but also allows for greater maneuverability, which is essential for tackling tighter spaces and challenging areas. The engine also features low emissions technology, ensuring compliance with environmental standards while being kinder to the planet.

One of the standout features across these models is the Easy Start system, which significantly reduces the pull force needed to start the engine. This user-friendly technology minimizes the effort required, making it suitable for all users, especially those who may be less physically capable or are just starting with brush-cutting tasks.

The ergonomic design of the BCZ2500 series includes a comfortable grip and a well-positioned front handle that promotes proper posture and control. This design not only increases comfort during prolonged use but also enhances precision and reduces operator fatigue. The inclusion of a harness in the BCZ2500SU and the BCZ2500SW models further ensures optimal weight distribution, allowing users to work efficiently for extended periods.

Each model is equipped with a high-quality cutting head that accepts both nylon line and metal blades. This versatility allows users to switch between cutting modes depending on the task at hand, whether it’s trimming grass, clearing brush, or handling tougher vegetation. The BCZ2500SW model is particularly noted for its advanced 2-in-1 capability, featuring both a brush cutter and a trimmer in one tool, streamlining the work process.

The RedMax BCZ2500 series is built to last, featuring durable materials that can withstand the rigors of heavy use in demanding environments. They also come with easy-to-access maintenance points, ensuring that users can keep their equipment in optimal condition with minimal hassle.

In summary, the RedMax BCZ2500SU, BCZ2500S, and BCZ2500SW brush cutters embody a blend of power, efficiency, and user-friendliness. With their impressive engine technology, ergonomic design, and versatile cutting capabilities, they are excellent choices for those seeking reliable performance in landscaping and vegetation management tasks. Whether for professional landscaping services or personal property maintenance, these models are designed to meet the varying demands of users while delivering exceptional results.