RedMax EXZ2500S-BC manual Transportation,  13 

Page 13

5. For safe operation

refill the tank of the unit in any place where there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other source of heat or fire which might ignite the fuel.

2.Never smoke while operating the unit or refilling its fuel tank.

3.When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look around to make sure that there are no sparks or open flames anywhere nearby before refueling.

4.Wipe spilled fuel completely using a dry rag if any fuel spillage occurs during refueling.

5.After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 10 feet or more away from where it was refueled before turning on the engine.

TRANSPORTATION

1.When hand-carrying the product, cover over the cutting part if necessary, lift up the product and carry it paying attention to the blade.

2.Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank during transport.

13

Image 13
Contents T3087-93110 OWNER/OPERATOR ManualPage Contents Safety First 4  Parts locationEX-BC SpecificationsEX-LRT EX-PS 6  Type de moteur 1KZXS.0254QR EM Cylindrée du moteur 25,4cc Symbols on the machine 7  Working Condition For safe operationWorking Circumstance  8  9  Working PlanStarting the Engine Before Starting the Engine 10   11  Using the ProductIf Someone Comes MaintenanceHandling Fuel  12  13  TransportationSet up Installing Cutting Head SE2 EX-BC SE1 SE2 Installing Debris GuardDebris guard Plate Screw EX-BC SE3 Balance UnitMain pipe Trimming mechanism Screw hole Fastening bolt EX-LRT SE1 Attaching the Trimming Mechanism SE1 16  EX-PS SE2 EX-PS SE1 Attaching the Pruning Mechanism SE1EX-PS SE3  17 EX-PS SE4 EX-PS SE5 EX-PS SE6 Chain tension adjusting screw Loosen TightenHole Moving direction Chain tensioner nut  18 Clamp bolt Lock screw EX-HE SE1 EX-HE SE2 EX-HE SE3 EX-HE SE4Bracket  19 Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL  20 For Your Engine LIFE, Avoid Fueling the Unit 21   22  OperationStopping Engine OP6 OP6 OP7 OP8 23  Adjusting Idling Speed OP10 Adjusting Throttle CableOP9  24 EX-BC OP1 Cutting Work Line Head Usage Adjusting the Line LengthTrimming Grass and Weeds  25  26  Bracket Handle EX-BC OP4 EX-BC OP5 EX-BC OP6Cutting Method  27  28  EX-BC OP7 EX-BC OP8Operation Controlling Blade BounceHow you can maintain the best control How you can reduce the chance of kick out 29  Transporting the Unit EX-BC OP9 Maintenance Blade 30  Operation EX-LRT only Adjusting the Angle of the Cutting Blades OP1EX-LRT OP1 Clamp lever Trimming mechanismOperation EX-PS only Adjusting OIL Flow RateEX-PS OP1 EX-PS OP2 Checking OIL Supply  32  33  EX-HE OP1 Operation EX-HE only 34  Maintenance Chart Maintenance 35   36  Spark Arrester MA4 MufflerSpark arrester Intake AIR Cooling VentMA51 Procedures to be Performed After Every 100 Hours of USEMA6 Cylinder Intake air cooling vent backFor safety reasons, do not use metalreinforced line Maintenance EX-BC onlyGear Case MA5  39  40  EX-LRT MA1 EX-LRT MA2Blades MA1 Quick TIPEX-PS MA1 MA2 MA3 Oiling Port Maintenance EX-PS onlyGuide BAR  41  42  EX-PS MA4 MA5 MA6Sprocket SAW Chain 43  EX-PS MA7 MA8 MA9MA1 Gear Case Maintenance EX-HE only 44   45  StorageCheck Probable Causes Action Troubleshooting guide 46  EX-LRT ATT EX-PS ATT EX-HE ATT Parts list 48  EXZ-PU S/N 302845 and up 49   50  EX-BC S/N 302960 and up 51   52  Engine Unit 352001 and upDescription Part Number Qty  53  54  EX-LRT S/N 000531 and upCasing B  55  56  EX-PS S/N 000000 and up 57   58  EX-HE S/N 000101 and up 59  Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans Page Komatsu Zenoah America INC